Uk Honda Civic 8th Gen Front Suspension removal and replacement of faulty bump stop .
ฝัง
- เผยแพร่เมื่อ 23 ส.ค. 2024
- How to remove and replace a faulty bump stop on your front suspension .
If you look inside your wheel arch and see an orange / reddish bump stop that has fallen out of the top mount bearing then it is faulty , giving you a SLOPPY KNOCKING NOISE ,
This video also how to change a leaking suspension strut and spring be it standard or lowering .
Music by
Joakim karud
Say goodnight
One useful tip that I seen in another video for removing the centre top shock is to loosen it very slightly /crack the nut while the shock asssembly is still in the car. This saves allot of time messing around when don't have impact gun.
Good tip about moving the nut before raking things off. Also after using the jack under the wheel arm to remove the down link you need to remove the jack so the tension goes out of the shock absorber and it all just unbolting and comes off.
Noise was probably due to knackered drop links or blown struts, bump stops don't make noises unless they have completely fallen apart. Should have replaced the struts at the same time as yours are most probably shot.
Are there any specific dimension specifications for the shock absorbers and the springs?
Thank you
Looks like you been driving through some floods by the looks of those suspension parts! Lol.
Zed Man was all original on 90 k miles mate
nice how to, got too do mine next saturday changing the lot ...
steve b cool , pain in the bum without the spring compressor and impact gun .
Hi, useful videos there mate thanks. I also saw your video about the front bump stops. I recently had both my front shocks, springs and top mounts replaced with OEM parts. After a week there was a strange knocking noise on the nearside front. Noticed the the bump stop has dropped. Will the genuine Honda bump stops fit my struts (KYB)? I took it to Honda and they're also saying because I didn't use genuine parts, the springs aren't properly seated to the shock assembly. Cos my rears also need new shocks and Honda quoted me nearly £1400 to replace all 4 corners!!!
Jay Arellano wow £1400 , yes I used genuine bump stop kit in some after market front shocks all fit perfect , I've lost all faith in Honda regards to fixing and servicing , did all 4 corners on my Civic with new genuine bump stop kits for around £300 . That's fitted by myself .
I will retrieve the car from Honda today, pay the Labour for diagnosing the issues, give the report to a local garage and get them to sort it out. I'd love to have a go myself but I haven't the tools and space to do it. The only worry I've got is that none of the local garages see much of Honda civics.... Probably a testament to its reliability.... So I'm not sure about their expertise in sorting this out. What I've done though is write down all possibilities that i've read on civinfo and will also be providing the mechanic a link to your video. Hopefully the sorts it all out..... Im only doing this cos I know it's a good car once all the issues are sorted. The only comment I can give I suppose is the lack of torque but maybe a remap will improve this
I've just realised that the front shock absorbers installed two weeks ago are Anschlers and not KYB. Are these any good? My springs are KYB. Cheers mate
Jay Arellano yeah there fine mate got one on my car from eurocarparts been fine
Hi mate, I bought the Honda bump stop kit and now having problems with fitment. I had the top mounts replied 3 weeks ago, and these mounts came with bearings which was then removed to fit the bearing that came with the Honda kit. They don't seem to match, do I have to have original Honda top mounts to accommodate the bearing that came with the bump stop kit? Thanks mate
How did you twist the bearings on, mine seem to be super heard
Hi noticed arrows on the top mount which ways are the supposed to face? ↔️ thanks
the front of the vehicle
I have a pinging noise coming from the drivers front suspension when I turn the wheel/corners. Any ideas? Same problem or not?
Bearing under the top mount is seizing.
What is the value of tightening torques for the nuts ?
Very tight 😂 not sure Honda manual will tell you , you can find it online .
Hi quick question can anyone tell me if in UK please, can someone repair car rear shock absorber?
wtf ? that white rubber stopper making knocking noise? please.
not the best how to's as are most of his videos, doesnt elaborate or actually step by step pretty useless really