Hey man! I am impressed by the amount of mods you have on this truck. I adore my mini e revo and have a ton of mods on it too. For me, personally, the stock motor on 2s was fast enough (I have the proline trenchers on) and I'd say it hit a good 40mph+ on stock gearing. My gripe with this truck has always been the suspension setup. I ran through a bunch of shocks to figure out which one works best and I honestly think there is NO POSSIBLE WAY to find a plug and play shock that would solve the bottoming out problem. Stiffer springs are not the way to go because even 90wt shock oil is insufficient for the given mass and the softer springs. An increased stiffness will only make the truck bouncier. The ONLY way to get beautiful handling characteristics on this truck is by making your own custom shock tower that mounts on top of the existing shock mount that can hold another set of shocks. Dual shocks per axle with blue rate springs on the back with integy black springs in the front, and integy performance shocks + stock shock alone with 90wt oil overall is the way to go. A damper plays a big role in not bottoming out because it creates a force proportional to the velocity of fall. Larger jump means larger velocity and larger damping force opposing the compression of the shock.
Ok went by Ace hardware and he's right. There are drawers there with springs in them and numbers on the drawers and numbers on the compartments in the drawers. Look for #93 ($1.79/each) also check out #90 (.99/each) they are a little shorter and not as stiff. Will try them on tonight!! Can't wait!! Thanks again for the Video Help!!!
I got 2 servos, a 3665 size motor, and 2 2s lipos i have use in series. Plus a 120a hobbywing esc... Also some alu upgrades... and the same body guard. So yea, my car also wants to sag
About to slap a hobbywing max 10 sct 120a in mine with a 4000kv motor. Upgraded my spur to medal hot racing 48t spur 23t pinion. Running a 3s 120c power hobby battery,running 20mm extensions with belted protoform street tires 👌🏾also a surpass hobby 17mg servo and a Traxxas wheelie bar
So I did this but my revo is still super saggy, probably mostly due to steel driveshafts and the 3670 motor and the tbone chassis brace. Does anyone know of any even stiffer springs? I'm already using 100w shock oil and the #93 ace hardware springs.
Hey man! I am impressed by the amount of mods you have on this truck. I adore my mini e revo and have a ton of mods on it too. For me, personally, the stock motor on 2s was fast enough (I have the proline trenchers on) and I'd say it hit a good 40mph+ on stock gearing. My gripe with this truck has always been the suspension setup. I ran through a bunch of shocks to figure out which one works best and I honestly think there is NO POSSIBLE WAY to find a plug and play shock that would solve the bottoming out problem. Stiffer springs are not the way to go because even 90wt shock oil is insufficient for the given mass and the softer springs. An increased stiffness will only make the truck bouncier. The ONLY way to get beautiful handling characteristics on this truck is by making your own custom shock tower that mounts on top of the existing shock mount that can hold another set of shocks. Dual shocks per axle with blue rate springs on the back with integy black springs in the front, and integy performance shocks + stock shock alone with 90wt oil overall is the way to go. A damper plays a big role in not bottoming out because it creates a force proportional to the velocity of fall. Larger jump means larger velocity and larger damping force opposing the compression of the shock.
I would love to see the dual spring setup, can you post a video of it?
@@murdoc94 me too.
Ok went by Ace hardware and he's right. There are drawers there with springs in them and numbers on the drawers and numbers on the compartments in the drawers. Look for #93 ($1.79/each) also check out #90 (.99/each) they are a little shorter and not as stiff. Will try them on tonight!! Can't wait!! Thanks again for the Video Help!!!
I got 2 servos, a 3665 size motor, and 2 2s lipos i have use in series. Plus a 120a hobbywing esc... Also some alu upgrades... and the same body guard. So yea, my car also wants to sag
About to slap a hobbywing max 10 sct 120a in mine with a 4000kv motor. Upgraded my spur to medal hot racing 48t spur 23t pinion. Running a 3s 120c power hobby battery,running 20mm extensions with belted protoform street tires 👌🏾also a surpass hobby 17mg servo and a Traxxas wheelie bar
NICE REVO ! do you know off hand if those springs will fit on the 1/16 HBX 16889 shocks?
So I did this but my revo is still super saggy, probably mostly due to steel driveshafts and the 3670 motor and the tbone chassis brace. Does anyone know of any even stiffer springs? I'm already using 100w shock oil and the #93 ace hardware springs.
What are the shocks i need the not shock not the spring
what tires do you have there??
I look for the link to get the springs, but is no there no more. where else can we get those springs???
Hardware store #5 spring
Where can I just buy the springs plz
Where do I look at ace?
Where at Ace Hardware are these? I didn't see them online....do most local stores have them?
What is the part number for the springs
18505. It’s in the loose screw section. Number 5 in the box
@@nighttrain6214 is that at ace
Already did this to my smaxx it works
Where at ace can you find those
Hello I write from Italy where do you buy this little piece of metal that stand in the middle of the shock absorbers?
What bumpers are you running? Where do you get them?
Looks like he has the t-bone racing chassis brace
Ace hardwer got the springs for 4 bucks !!
what are they called
Samo ih razvuces i tvrdi su
✌✌👍👍