That knowledge about the foam tearing away from the material probably saved me hours of frustration, and having to redo my headliner. Thank you, and good work!
Hi Slick, I'm in the UK, I have an old MPV that I use a my daily run around, it's not worth spending a fortune on speakers, stereo system, amplifiers, etc. but the stock speakers were blown, I've replaced them with some nice little two way units, but as the originals and consequently the replacements, are only 4" speakers they lack punch, so I was looking for ideas to fit something a little bigger in the door panels, and after watching your vid I think I'm sold on making my own custom panels for the doors. I was a GRP Laminator many years ago so am competent with GRP, I just needed a little inspiration, which you have supplied. Many thanks, and keep up the great work.
Great video Bro. I’ll be doing this on my channel and I’ll mention your channel. Keep doin’ your thang. I like the setup. I also like how you explain the installation process.
I just saw the vlog bro it's a good how to video and like you said your learning I mean your at least giving it a go and your willing to learn and as you learn you eventually make mistakes and as you learn you'll eventually perfect your skill that your picking up and your honest about it your no professional. 👍🏽 echale ganas Bro.
Do you use 1/2” thick ply wood for this? Doing my headliner this weekend. Been wanting to do this forever now I have the inspiration from you! Real good video keep up the good work big dawg
Yo where you at… You gave me a good idea, not bad it’s good. No one is gonna get in the car and look up for too long so the mistake in the fabric isn’t gonna get noticed. Just say the dog did it …. Haja
I was about to attempt to build a sound bar overhead in a 2000 4 door Accord for 4x 6.5 midbass DS18s. But now that I've seen you pull the headline down that looks a lot easier than the way I'm going.... Am I correct? Another question.... Will the sunroof make things a little more complicated? I've never pulled down a liner with a Sroof. It has the back sliding cover. I'm thinking I will have to eliminate that... Any advice is appreciated. New subscriber!
And behind the row of 6.5s I'm placing 4x 8" mid bass woofers. I have 2x 6x9's in the rear deck and 2x 15s where the backseat was at. And 2x 6.5 2way 1 in each door
I have a obs ford a 92 flareside i want to do something similar but my headliner is cardboard on top but fiberglass in the middle but cardboard backing will it be safe for me to fiberglass on the cardboard I’ve fiberglass before but never on cardboard headliner what would you recommend?
That knowledge about the foam tearing away from the material probably saved me hours of frustration, and having to redo my headliner. Thank you, and good work!
Thanks bud
Hi Slick, I'm in the UK, I have an old MPV that I use a my daily run around, it's not worth spending a fortune on speakers, stereo system, amplifiers, etc. but the stock speakers were blown, I've replaced them with some nice little two way units, but as the originals and consequently the replacements, are only 4" speakers they lack punch, so I was looking for ideas to fit something a little bigger in the door panels, and after watching your vid I think I'm sold on making my own custom panels for the doors.
I was a GRP Laminator many years ago so am competent with GRP, I just needed a little inspiration, which you have supplied.
Many thanks, and keep up the great work.
That’s awesome thanks for watching bud
Thats sick!! Very informative. Shout outs from Hawaii🤙🏾 good shit bro!
Looked great! Good job!
After watching this video I really feel like I could do this. Thanks!
Good shit! You got skills! Looking forward to
More videos
Nice man I been wanting to do this to my truck appreciate for showing how to do it
Yes sir no problem good luck 👍🏻
Good idea...watching from Brazil.
Awesome how-to bro! Great video !
Thanks Arod
Primo your killing it keep up the good work, wish you where in vegas I would have you do mine
Awesome work !!! Love the vids !!! Definitely subscribed !!!
Thanks bro 🙏
Great video Bro. I’ll be doing this on my channel and I’ll mention your channel. Keep doin’ your thang. I like the setup. I also like how you explain the installation process.
Thanks bro I really appreciated
I just saw the vlog bro it's a good how to video
and like you said your learning I mean your at least giving it a go and your willing to learn and as you learn you eventually make mistakes and as you learn you'll eventually perfect your skill that your picking up and your honest about it your no professional.
👍🏽 echale ganas Bro.
Yes sir thanks 🙏 and yes sir you learn as you go!!
Great Video hope to see more .
Thanks and yes sir I’ll e making more for sure
Man that's a great tutorial...definitly gonna do this to my nbs
Hell yeah give it a shot 👍🏻
Good job.. gave me some ideas for my truck..
Great video bro! I enjoyed it.
Thanks for watching 🙏
Badass turnout bro keep up the good content!
Thanks Bro likewise 💪💪
Man this is clean 👌
Thanks bro 🙏
Solid work 👌
Another cool video 👍
Thanks 🙏 Dean
Looks Good 👍
Good stuff. Another way you can mount it is to use nut insert kit. You can find them pretty cheap
Thanks bud I’ll look into it for sure
Great job!
Thanks!
Looks awesome bro
Thanks bro
Great job bro. 🔥🔥🔥👍🏽👍🏽👍🏽
Thanks 🙏
I use baby powder on my arms and helps w the itching!! Good videos G
Thanks for the tip bro
Cool vid bro been trynna do this on my truck
Thanks bro good luck 👍🏻
chingon!!! looks better than pods forreals!!!!
Thanks bro
Do you use 1/2” thick ply wood for this? Doing my headliner this weekend. Been wanting to do this forever now I have the inspiration from you! Real good video keep up the good work big dawg
thanks for the info
Good job brother
That's a pretty neat trick. Looks like you did a pretty good job.
How's the headliner holding up with the extra weight of the glass and speakers?
This was for a friend and yes still holding up good
Here from tiktok!🤘🍻
Cmon 💪💪
Bro love it.. You did great.. Ship.. I want to do the same to a charger
Thanks bro I’m sure it’s gonna look nice I’ve never seen it on a car!
🔥🔥🔥
Good video bro just wanna know how you put the headliner in without bending it on a crewcab
Same
Do you staple the back ends ? Or just glue? Very informative video thank yoi
I actually glue the back with the same headliner spray! Thanks for watching bro
Good vid
Thanks bro
Awesome video bro!! I’ve never seen anything like this! Could this be done to a 2020 ram 2500 tradesmen??
Yes sir to any vehicle
Thanks bud I really appreciated
Nice work . I can’t wait to do my headliner
💯
great job bro love your videos. I noticed you don't like the sponge headliner. What is the best material you like to work with that won't wrinkle?
I just don’t like the foam because once it’s on there you can’t rip it back off and work with it
And thanks 🙏
U gas bruh I like it most definitely did your thing on that
Really appreciated bro thanks
How long does it take to do? I want to do it myself also you have any tips?
And thats how Im going to get instruments up there. Thanks?
How do you mount the headliner up if the speaker pods are covering the mounting holes
Can you do a diy speaker headliner 00-06 Tahoe model
Yo where you at…
You gave me a good idea, not bad it’s good. No one is gonna get in the car and look up for too long so the mistake in the fabric isn’t gonna get noticed. Just say the dog did it …. Haja
🤣🤣 exactly
🤘🏻
How do you wire the speakers to the vehichle once it’s like that?
What kind of material do you use bro
Can you show the wiring?
Where do you get the suede from ?
Video on where or how to wire them for the best audio?
It all depends on your setup
What plywood exactly are you using ? As in size ?
I was about to attempt to build a sound bar overhead in a 2000 4 door Accord for 4x 6.5 midbass DS18s. But now that I've seen you pull the headline down that looks a lot easier than the way I'm going.... Am I correct? Another question.... Will the sunroof make things a little more complicated? I've never pulled down a liner with a Sroof. It has the back sliding cover. I'm thinking I will have to eliminate that... Any advice is appreciated.
New subscriber!
And behind the row of 6.5s I'm placing 4x 8" mid bass woofers. I have 2x 6x9's in the rear deck and 2x 15s where the backseat was at. And 2x 6.5 2way 1 in each door
what brand jigsaw is that? Do you think any cheap one can do the job or do you recommend a good or better one?
This is a 20$ Walmart jig saw I’ve had it for 4 years no issues
how could i oder from you when i need one for myself
i’m doing same rack but with 4 6.4 and 2 tweeters, can i just screw in the rack with the headliner or do i have to fiberglass it fsfs?
Hey bro I was wondering what you ended up doing? Im doing this same thing but not sure how I should mount
What’s the name of the material you use
How much do you charge
Are you local bro?
What size is the plywood? 1/2 ? 3/4?
1/2
I have a obs ford a 92 flareside i want to do something similar but my headliner is cardboard on top but fiberglass in the middle but cardboard backing will it be safe for me to fiberglass on the cardboard I’ve fiberglass before but never on cardboard headliner what would you recommend?
Yeah it would come out good just reinforce it with resin and then do the process with the speaker rings
@@SlickGarage just resin the cardboard with resin or lay a layer of resin and some fiberglass Matt?
@@JaminGalv the fiberglass would be a better option but both would be just fine
You in Houston bro?
Yes sir
Where are u located ? I would love for you to do my 2006 Silverado crew cab
Houston Tx
How much you charge to do a 98 ext cab pickup 4 4×6
Message me on Instagram at SlickGarage
Did you rub the tweets on the same channel as the mids?
Do you have a video of the install ?
No just look at the very end of the video and I explain it there it’s really simple just screw it to the support on the cab
How much would u say a 99-06 single cab headliner would be at the junkyard in fair condition
Not much maybe like 40$
@@SlickGarage oh good I was thinking on practicing on one thx
@@willywonka5590 give it a shot if you have any questions you can message me on Instagram at SlickGarage
What kind of fabric is that?
Headliner material from Hobby Lobby
Do they come in pairs or you gotta buy em one by one ☝️
Pairs
Chingon
Quick question, where do you get the fiberglass from? Or does “fiberglass cloths” the same thing?
Yes sir same thing I get it from autozone or oreillys
Do you ship I wanna shop with you I got a 1991 Silverado
How much u charge to do mine??
Message me on Instagram at SlickGarage
@@SlickGarage I will
Yo you have a Texan/ Mexican accent!
😂😂 yes sir Spanish is my first language
U make them and sell them ?
Yes sir
@Slick Garage, where you located bro?
@@jRomero713 Houston
You need CNC router machine.. Now Days it's very cheap... and lots faster uses CNC router machine ahhhhhh