How To Fiberglass Speaker Pods / Tweeter Pods - Box Chevy Build - ALLKANDY FLAT / MATTE CLEAR
ฝัง
- เผยแพร่เมื่อ 27 ส.ค. 2024
- Please watch my latest video here: "How To Wet Sand & Polish A Car CUT N BUFF To Remove Runs & Orange Peel With The Vevor 6" Polisher"
• How To Wet Sand & Poli...
-~-
Visit : spraywaycustom... for New & Used Spray Guns & Parts
Complete step by step build on fiberglassing speaker pods / tweeter pods for the A-Pillars....I'm going with two pair of Kicker 41CST204 CS series 3/4" Dome Tweeters....I used a bed liner paint by Rustoleum and sprayed a metallic base coat over it with a matte / flat clear coat from ALLKANDY to give it that factory look ...fiberglass center console and custom bucket seats next TH-cam...SprayWayCustoms
#CANDYPAINT #SPRAYWAYCUSTOMS #HOWTOFIBERGLASS
Textured Paint : Rustoleum Bed Coating
Base Coat : Sherwin Williams Metallic
Clear Coat : ALLKANDY FLATTENED CLEAR
You can use the same process to:
fiberglass dash
fiberglass speaker box / sub box
fiberglass rear deck
fiberglass center console
fiberglass tweeter / speaker pods
fiberglass kick panels
fiberglass pillars
fiberglass bumper
fiberglass spoiler
fiberglass hood scoop
Endless possibilities
![ว้าว!ลุงบีมแบกทองมารับขวัญหลานกันยกบ้าน [cc] แดนแพทตี้ SS2 | EP.49 |](http://i.ytimg.com/vi/Osihq1OAs-4/mqdefault.jpg)
Here's A Video Of Fiberglass Supplies To Get When Fiberglassing th-cam.com/video/spw6BGPdjbg/w-d-xo.html
You Sir, are a prime example of "attitude is everything". Your skills are impressive, no doubt, but your demeanor is your best trait.
Finally, a 'how to' vid that actually shows those tiny details that make sure ya work lasts. Thanks.
Luke Johnson I've been up looking for hours for a video to actually take Yu through every step nd how it really done very awesome DIY Video
Even older dudes such as myself being 64 yrs young am truly impressed with your work and has helped too inspire me too want to try something like this as well on my 92' Bronco XLT. Truly an inspiration. Thanks
Dude does shit 10 times better than any other fabrication channel... one handed. Amazing work these days... and this was 5 years ago.
Thanks man
mixing the filler and resin in order to brush it on was genius. Great video.
Joe Marti thanks for watching
"it might not be the right way, but it's the Sprayway." I'm Totally impressed!! it may've been a long video, but it was totally informative...I feel like i'm learning from a Zen Master of auto customization,
Thanks for the awesome lessons.
The beautiful thing is technique even the affordable way works.
Bow down to the zen master of body molding and paint. Just beautiful work. You don't need a school, because that was a well presented lesson.
I'm glad you enjoyed it...very much appreciated
I like the fact that you point out where you are buying the tooling and supplies, keeping it real. Most other channels/videos show only high end tooling and big name supply names. It goes to show that talent is talent, and you definitely have the talent part covered while using affordable tooling and supplies. BTW, that texture trick,WOW!!!! that right there blew my mind, added a new trick to my bag-o-tricks!!
Soon as i started watching the video i knew it was gonna turn out looking sick as hell! Great job man!!
Thanks man ...keep doing what you do too
Respect man. Your methods, and how you explain things so simply makes this very easy to learn from. I for one have laid a s...ton of fiberglass in my time, but always like learning new ways, and that fleece you use is gonna save me a TON of money basing things. Love watching you work man, keep inspiring!
Thanks Tim
"Rundo"
I gotta say, that's brilliant!
It's one of those ideas that when you see It you think, "That's so simple. Why didn't I think of that?" Who knows why, all I know is I appreciate you sharing such a great idea.
Thanks a lot
My wife hates driving my Bimmer. She don't see the bigger pic past the primer and fiberglass. True art work
No doubt Dave...appreciate you
@@SprayWayCustoms I need a trunk mod vid. Something super sic. Tryin tuck 5 10"s in the back.
Let them haters hate, keep them videos coming, u teaching a lot of brothers around the world. Love from mother land Africa🙏 Stay blessed brother
Reagan thanks for the big support coming from Africa 💪🏾
I agree doing something that nobody can be able to do they will be the ones ridn DICK when he get notoriety for great work!!
Those came out amazing... I love the finish you came up with! Probably pretty durable too...both the fiber glassing and the finish work. Great job!
Thanks JEG's...I just subscribed to you
Can you make a video speaker door panels fiberglass on 2000 Honda Civic
this is the first time i have ever watched a video of this length without Skipping it, well done, damn good job, much respect
Thanks man...glad you liked it
I just want to thank you for putting up these videos. I have so many new ideas since I've been watching them. I got an El Camino that I'm going to customize and your videos helped me realize that it's not about the space available, it's about creating new space. It'll be my first custom job ever, so I'll expect a few mishaps, but I'll record it all and put it up when its complete.
Ive been fiberglassing boats along time Ive learn a few things from you. Great quality work and finish !
Brother, you're making this look easy man.
It's not hard, just takes a little time if you want the outcome to turn out right....thanks
I’m learning from your videos, so much work but so satisfying accomplishing it yourself instead of buying it!
Appreciate you
This the second time I watched this video and I'm still impressed and learned even more
Great..thank you
I love what you do man , wow ! I would love to start something like this man or close to it , i like the way something looks when its finished and being reminded that its your worm and looks professionally done. Im beginning to realize im a DIY type of guy! Its cheaper when "You" know what your doing versus paying for labor as if "You" we're handicapped! Love your work man , i learned how to fiber glass from just watching your channel. Wow , what an impact , Right on man ! I don't usually comment on ppl videos either , thanks G !💯💯
Yes...it's great satisfaction when you complete a project of your own
Yoo...that rondo is brilliant. Thanks for giving me the idea. I'm doing speaker pods and would've used bondo. But you showed me the spray way
I seen another comment in here saying it’s not the right way but the sprayway, I agree. You do you and it still came out the way you wanted. At the end of the video I like how you kept the camera on the finished product for a long time, Shows pride ! I’m almost done with mine .
Much appreciated
You are the only guy who shows his work in steps and properly show how you do things . No wrong or right way as long as it looks good and lasts for many years so good luck Bro
May God Bless You
Thanks for the encouraging words Porn Star
Dang that turned out fantastic. The only thing I hate is how easy you make that look. :) But that is a sign of someone that really knows their craft.
Thanks bro...I just research and study before I jump on a task...thanks for the support
Unbelievable those look so nice.. Not some chinsy overview but detailed step by step instructions.. Hopefully the old box will get some love soon.. That will be epic..
Thanks V8Ferrari, hopefully pretty soon I'll get some time to get back on it
Your attention to the details you can tell you have true passion for what you do
Thanks
Damn man you got fans, the haters wish they had your talent.
Thanks for supporting Buckwild 65
Visit : spraywaycustoms.com/ for New & Used Spray Guns & Parts
SprayWayCustom
Robert Hersey 1. Stop lying. Your massive amount of grammatical errors shows your true intelligence and someone that has accomplished so much wouldn’t have the time nor care enough to make a comment such as yours.
2. CUSTOM does not mean someone has a paint and body shop or even have anything to do with paint and/or body work. It’s literally anything he wants to do that’s not OEM or something that’s mass produced that someone can purchase.
3. If it’s his car he can do whatever the fuck he wants to do. Not everyone has money to go buy whatever expensive paint and materials themselves and if he’s happy with the outcome then your opinion means dick.
4. Your post only served 2 purposes. 1. To try to shit on him (being a hater) and 2. Trying to make yourself look/feel good about yourself. That’s caused by some deep rooted insecurity you have and this video or the original poster has nothing to do with your ability to satisfy a woman or the way your uncle touched you when u were younger. Find it elsewhere.
I’d like to add that he didn’t mention anything about trying to get peoples business. He could just be a guy that like doing things himself. And if that’s the case,even if the paint did mess up years down the road. Then he gets to do it again for a very low cost and maybe even change the color if he wants too.
And last of all. No. You don’t have a yacht No one would spend their life earnings to retire and blow it all on a damn boat. That’s stupid. Also the people that actually do have yachts know that it’s a huge financial loss and would have spent their money on a lot of other things before giving a significant amount to something that loses value faster than a half chewed 4 piece chicken nugget meal from McDonald’s.
To the person that made this video. GOOD JOB. The shit came out looking clean and for doing something in a home environment it looks very professional and I would gladly pay for your services. You’ve inspired me into doing this myself with some pods for my a pillars and doors
I like your work 🙌🏿 I thought it would be harder to do. Not too complicated 👍🏿 thanks for the teaching ✌🏿💕
@Jerk Of All Trades yes he does 👍🏿 it's very motivational. I have some patience...
@Robert Hersey Hating ass boi
Amazing work as usual brother, these turned out KILLER! Never considered the bedspray myself but i think it turned out awesome in the end, I'll have to try it sometime. Dont let the haters hold you down man, you're rocking this shit. Keep up the good work man!!
Thanks for the motivational words Alan...Them haters can keep on hating because I can't stop/won't stop
I sit here and watched all of your video. It was great in explaining every little detail. You explained how to fix the little things that at first that didn't come out right. I have never even thought about doing anything with fiberglass, but with you explaining everything like you did. I now will give it a try. Thank you very much for doing this video.
Not a problem at all Roger...glad you could get something from my vids you can use
love the way you teach how to do it very clear no noise like family or kids or loud sounds in the video awesome job my friend
Pro Tip. When using a hole saw, to avoid "blowout", instead of drilling all the way through in same direction, stop, and drill back though the opposite side. 😉
Great tip Grumpy, I'll be sure to use it next time...👍
Or just go half way and reverse the drill and lower the amount pressure you get the same result
Sometime you can't get at you work piece from the back
What size wood do you use 1/4,1/2 thickness?
Great work Spray. Keep doing your thang my brother
Sure will....thanks
I build custom muscle cars..and every time I watch your videos I learn something new. Thanks for the fresh ideas. Well done ...keep the vids coming.
I'll keep the camera rolling as long as you keep watching and supporting.....Thanks and glad I could help
these were the pillars I needed to repair never thought of adding tweeter pods now they going to be the spray way much love for all the knowledge
its alway a pleasure to watch you do what you do i see we have a hater smh
Thanks bro....love the motivation and support from you
Love your work brother keep it coming.
No doubt about it Beereal.... That's a must
all the sandpaper i tossed before i seen that tip.... i am shame.. lol. But seriously, i've learned more about this stuff from your videos lately than i ever knew. Thank You. This is what youtube is all about, rare good channels like yours
Thanks for the support man
Once again a motion picture event and well worth it. Very clean tight work. Thank you SprayWayCustoms for the well guided DIY.
No prob fam.... You the D.I.Y. King though
Can't wait 4 the next video, the last 2 hours I've been watching it videos. got me wanting 2 learn and pick up this craft, u need an assistant?
nice bro really nice I wish I could see those panels installed on the impala though liked and subscribed your good at this man
Dang,this dude knows what he's doing.This kind of work definitely requires patience!
I watched one of your videos and now I have to watch all of your videos! You're really inspiring me to do some custom work myself. I'm looking at my 1990 Chevy and seeing all the possibilities after watching your videos. I just wanna say thanks man!
your a smart man, well done, keep on learning and sharing, from australia
Thanks Paul, appreciate the compliment and love from Australia
great video my fiberglass brother 👍👍
Thanks MB....all them long nights watching your vids paying off
+SprayWayCustoms im glad to be apart of that thank you appreciate the love you been showing MBCUSTOMS1
No problem...just paying HOMAGE
I just started doing fiberglass. I think I have done pretty good so far and it is thanks to your videos I even tried
That's great William
I made some buckets to install some speakers through a flat panel. I used fleece and resin with supports hot glued and the fleece stapled. The resin melted the glue and the buckets collapsed. I wound up giving it another try, but shot some finish nails into the supports. That time they stayed together and now are installed on the boat. Sounds great.
Yes, I been through that before myself. The resin interact with the glue. Thank you
Damn homie yourself taught, I thought you went to school for that, major props!
I did go to school for it back in 1997. I didn't get back into it until 2014 but I actually learned more from watching TH-cam
Lol i wus about to hit your phone in ask where the video's at...looking good 👍👍
I appreciate that Tweet G...you know it's a slow process when you want it done right
Really .. you are the master of FIBERGLASS.
Thanks a lot
I watched so many videos and none of them were as informative as yours I wish I saw this one first it would of saved me hours of time anyways thanks for such a detailed video I’m ready to try it now.
Thanks K B, I'm glad you found mines
hi sprayway .. i want to see the whole car done..
Awesome work and u know had to favorites this! how u like the way this all kandy lay out? CJ
Thanks CJ....it lays out good.... It do what it says
I like this idea of projecting the tweeters outwards. Looks professional. It's given me a few ideas as I'm new to messing with dashboards. I'm a carpenter by trade so I got a little head start. Cracking idea. Thanks a lot for taking time to make the video. 👍🇬🇧
Thanks for showing how it's done.... I been watching your videos on my free time. I'm glad to see a brother doing big things on his own. Much love I've learned a lot watch the videos you post up.. Thanks keep'm coming.
dude you are the shit.... amazing work.
Thank you for the great videos man I've always wanted to learn how to do fiberglass work I used to do car audio installation years ago but now I just do it on my own cars and my son's cars in my spare time and now I'm going to learn how to do fiberglass your videos step-by-step are very understandable thx
Thanks for the support
Do you take orders through the mail if people ship you interior parts of the vehicle can you redo them and ship them back
This is the most informative channel I have found for fiberglass door panels or pillars. I really appreciate what you do! Headed to your website right now.
Thanks for supporting
I love watching your videos! Makes an amateur feel he can do it!!!!! LOVE IT!!!!!
Thanks Jason...you got it
Man, I've gotta tell you....I've got a lot of respect for you and what you do!!! You've inspired me to get back in the game and do what I love. Thanks Bro!!!
Appreciate you Shannon...Roll Tide
Nice job and a great instructional video for newbies and the "experienced" You are a real talent and show that you don't have to have a million dollar shop and spray booth to do good work and be creative. Bravo!
New subber here SW...as a noob to the fiberglass world, you showed me a different way at going about building up A Pillars...You laid the smack down on this build, and you done it on mostly a minimal budget...Now that I have saved the video, I will be able to slowly utilize it with doing my own build..Thanx for the vid
Thanks for subscribing...I really appreciate the support
Your videos are fabulous. I have learned much. And your narration is terrific and full of hints and other helpful nuances to make the job perfect. Thanks man, much appreciated.
Thanks for watching
Got a 83 box Chevy.... you just inspired me to go fiberglass on the interior. Working at a body shop in H-Town bout to black it out from bumper to bumper and the entire inside fiberglass and wet jet black. Yessir
That's whats up Cleo...thanks for watching and post some vids of your work
I gotta say bro, this is the best interior fiberglass video I've watched yet..i feel totally confident about doing this my self now! Thanks for taking the time to do this video!
This is just great. I was hesitant to put my tweeters straight into my sail panels because I really wanted them angled and higher up. This vid breaks it down and makes it super simple to fiberglass my A-pillars. Thanks very much sir. Feels like a real build and shows the small things, which most how-to's seem to obfuscate.
Thanks Justin
I'm impressed. You're a genuine craftsman.
You just saved me about £200-300. I appreciate it brother. Thank you.
No problem at all Gavin...Appreciate You !!!
You'd be the best homeboy to work with. I love your videos. Please show us some of your setting up technique for painting. And especially what your doing with bondo and resin. I am lost when it comes to guns and pressure and those types of things. You make sense of all of this. Please keep it up. There are lots of us who need ya 💯
YO WHY DIDN'T I FOUND YOU EARLIER!!! Watched the whole video!! great video.
I'm glad you found me now. Thanks 🙏🏾
you have no idea how much I appreciate your time and effort sir thank you very much!
I really appreciate you as well...THANK YOU
I cant get enough of your videos. Great step by step guides.. subscribed
It's very much appreciated Martin 👍🏾
Convinced my dad to let me fiberglass is ol skool cutlass cause of you're videos. keep the videos coming bro
The bed liner for texture was a great idea.
Thanks, glad you liked it maxie9506
That hot glue a life saver.. man I was thinking how to do something like this but it was involving bondo/fiberglassing spikes onto a protruding rounded flat topped surface... man imma make this outa cardboard and get it done today!!! I think i gotta watch your classes on a daily basis.. gets the mind going.. inspirational, and damn creative!!!
I had to hit the like and subscribe buttons. You share all your tips and tricks, clearly show any imperfections, and how to correct them. I've learned more in this one video, than all the other channels combined. Thank you for taking the time to share your knowledge. I've been researching how to construct an over head console for my 57 D100, and A-Pillar pods for my 99. I'm ready to tackle these projects now that I know what to look for, and what products to use. I would of never thought to staple around the base to retain the shape. Thanks again.
Yes you have to staple around any curves that might come up when applying the resin because it interacts with the glue unless you use CA glue....Appreciate you Al Cyr
I appreciate what you have done and shared with everyone. I have watched way to many TV shows showing custom work. None of them show what is actually involved. I like how you show everything from start to finish. Keep sharing your ideas. Thanks from the great white north, Canada.
Men you are an inspiration! Thanks for yoir show and for teach what you do. Men i paint 3 cars allready cos of you, you are a motivation and kipp up good work. Not see all your movies on youtube but have seen a bunch. Thanks a lot and kipp up the good work. Thank you bro! Wish you the best! Best regards from this Portuguese guy that live in Norway!
Thanks man 🙏
One of the rare VIDs I watched on youtube in which no questions remain open, which is always a good indicator of mastery!
Great video and thank you for sharing your expertise!!!
Subscibed!
You are so smart man. I appreciate the DETAILED video. I have been watching dozens to learn how but they always leave something out leaving me with a bunch of questions you missed nothing you motivated me so much I appreciate it. I will be doing my first pillars next month.
Nicely done! I like that you explain step by step and give lots of info. Very educational for people trying to learn how it's done.
My pleasure Zach ....thanks for watching
Coming back to rewatch some oldies but goodies!
Thanks a lot
Very thorough instructions....your a great teacher and master of your craft.
I know this is an older video, but dude you do a damn good job and I love watching your videos bc you do a good job explaining things and give me a chance to learn. THANKS
No problem at all, thanks for watching tdw1987 X
You can use the "cheese grater" as soon as you brush on the filler. I've never seen rosin and filler mixed. That's pretty cool 👌
Thanks Nic Morales
omg i don't know how i found you but i can watch you all day, i have learned a lot from you. Your a genius....thanks for sharing
Crystol I'm glad you found me...hope you stay tuned for more....I subscribed to you as well
omg great, I will defiantly shout you out, because you go me wanting to paint my truck!!! Take care man and thanks for subbing to me as well You are the bomb.com
No problem Crystol
A tip for making rings, put BOTH hole saws on the arbor at the same time. Drill part way until the outer just starts to cut, flip and finish the cut. Also get fine tooth hole saws if you can.
Appreciate that
i usually don't sub, watch cats videos and just keep it pushing. same way I learned to do em. your technique works and with good results, good job
I dont care how long the videos are longer the better
Appreciate that
Every time I watch one of your videos I’m blown away man. Amazing!
Thanks a lot
Bro this is LD from Dallas. I appreciate you making theses videos. been wanting to fiberglass me door panels in my Suburban and just never knew how. watching you is going to be a huge help for when I get started
Ain't nothin' new, young man...just knocked it way out of the park once again! Talent...Talent...Talent, in MOTION!!!!!!!
I wish I was young again Manuel...I'm 42...I just always loved this type of work and continue to live my dream...thanks for supporting
u r very gifted n very detailed in your work the signs of a true pro one of the best i have seen n keep blessing people with knowledge one love keep up the great work brothers like u is what make this country great do u hear me Trump the real hard working people
nice work man!, one trick i learned for interior screws is to screw as many as you need into some wood (just two turns) and paint them when you put your colour on, a bit of clear after that and when dry they will blend in perfectly.
a thin polythene bag over the end of your screwdriver is just enough to stop the paint coming of the screws when you put them in on the final install.
keep it coming i love this stuff.
you the man brother. I am going to start my projects because you showing me how to. Thank you.
This guy deserves way more subscribers for these videos hope he keeps up the amazing work
Thanks man....I never thought I'll have the number of supporters I have for the time I been doing videos....it take time but I think my channel coming right along....they say it gets better with time ...thanks for your SUPPPORT
Appreciate you taking the time to show us amateurs how it's done. Good video, lots of details, & showed us how to take it to whatever option we wanted to paint. Thanks
I had no idea putting tweets in the door was so much work. great work
Dude, I know this video is a year old. But honestly they still go way hard!!! Especially from a motivation stand point. As much as I have some reservation, or fear, of trying something like painting on this level, your vids help out a lot. Thanks again for posting them. It helps with a budding painter or someone wanting to try to paint!!!