🔴GEAR WE USE FOR FILMING & EDITING amazon.com/shop/alliandwill 🎵MUSIC & SOUND FX WE USE IN OUR VIDEOS bit.ly/2NPCjd7 👉GET 50% OFF OUR EDITING PRODUCTS alliandwill.com/featuredproducts
I've been watching a whole lot of DVR tutorials in the recent past, and yours perfectly hits the spot - not too slow, covers basics and a tad more so that it keeps the interest levels up. All in all an excellent tutorial. Thank you!
Thank you so much for this lesson! I just got a M3 Mac air and I decided to go big, learning one of the toughest editing programs DaVinci resolve. I am not going to lie I played back this video back numerous of time, I got frustrated because I am also new to the the Mac book so it has been tough, but so worth it, once I got through the whole video!! welting up a bit because I feel so accomplished learning from this video. Thank you for taking the time so us newbies can have a shot at the knowledge to hang with the big dogs knowing DaVinci resolve.
Great video with some very helpful information. Could you please do one to show how to delete a video clip in the middle of a timeline without the rest of the following clips on that track jumping backwards and throwing them out of alignment with the tracks above and below the track in question. Essentially, I sometimes just need the gap left when deleting a clip fro a track to be able to insert a different clip of the same length.Thank you.🙏❤️
Glad it was helpful! To answer your question; simply select the clips you want to delete, and hit the backspace, or delete key on your keyboard! This will delete only those selected clips and will not ripple delete your clips in the timeline. That being said, we do have a newer video 'How To Edit 10x Faster' that you may find helpful: th-cam.com/video/-8keOMaU9mY/w-d-xo.html
@AlliandWill Thank you. When I normally delete a clip it moves the next clip backwards over where the previous clip was, instead of maintaining a space. I'll try it using the backspace key next time as you suggest,
Clearly you are expert and thank you for such a complete course covering so much in such a short time. I have been finding getting the files into the project not easy. No doubt after the first time it will be easy. What file types will import? I’m guessing mp4 is easy.
Excellent video tutorial! I'm new to Davinci and have a few questions. 1. Is there a way to increase the size of the audio meter on the right side of the edit page without switching to the fair light page? It is very small. If I set the GUI to 200% what would that change? 2. How do you reset the timeline timecode to zero vs the default 1 hour readout? 3. The single preview mode I prefer to use seems to cut a little headroom off the talking head. I think it's set to fit or 100% 4. Other than the mono option on the timeline, is there another way to copy right to left or left to right audio channels on a clip that has one channel only? 5. Do you have a multi-cam tutorial video? 6. Is there a .mov export codec option in export in the free version and what is the max kbps bit rate we can type in other than 80,000? 7. I watched you beginner node video on color correction about there needs to be a separate node for each adjustment like gamma, highlights, contrast etc. a node for each vs. all in one adjustment. That helped a lot. 8. There are some pretty nice 3D premade fusion titles that are thick and have cool animations. I'll learn to create one from scratch sometime if you have a tutorial video on 3d Titles. 9. How do I get the singe preview window mode to max out in size where it is very wide? Im using a high end pro laptop with 4K 3840 X 2160 screen resolution. I also always film and edit in UHD. 10. Are the built-in sound FX and music library copyright free and can they be used commercially beyond TH-cam? I appreciate any info on the above questions.
The answer is VERY complicated and has to do with standards that were implemented from many years ago for broadcast tv. (Has to do with syncing sound and picture and working with the electrical grid frequency in North America known as NTSC). If you’re uploading videos to the internet, it won’t matter which you use.
Another fabulous job. But Alli, one major error. I sincerely hope Will and you didn't get only this terrible weather the whole time you visited the West Coast. Honestly, it isn't this terrible soggy weather all the time. Hope you two have, or will be, holidaying here again when the sun travels from Hawaii as usual!!!
HELP - I'm lost on one thing. My apologies, this is surely the simplest (maybe dumbest) question you will get today... Are Davinci Resolve project settings ONLY used for the actual editing process on the computer, and nothing else? In other words, when I put my media into a Project, are "PROJECT SETTINGS" only to help me edit things in a smooth and consistent manner, OR are these settings exactly like what I will ultimately render and save. I probably asked that in a confusing way (because I AM confused), but just want to know what is the actual PURPOSE of project settings - Just for Editing OR Both editing and the final saved video? Anyway - THANKS for your video and your channel (Subscribed now).
If you don’t know, then it’s a great question! Project settings are for while you are editing. They help make sure your project matches the footage you’re working with to maintain quality. For example; If your footage is HD, and you set up your project settings to be HD, when you export, you can choose to export at a different quality setting vs what your project was set up for, but for most, keeping things consistent is the best choice. Project settings are different than exporting settings, but things should be kept consistent to preserve quality. Hope that helps!
@@AlliandWill THANK you so much - THAT is exactly what I was asking. Maybe not quite so confused now. Believe it or not, no instruction I can find online actually clarifies that precept - Kind of "The elephant in the room" stuff, I guess. I just wanted to know how media, and project settings, and final video really interrelate format and quality-wise. Understanding this now (thanks to you) allows me to edit videos in the simplest and quickest ways possible without too much concern about the finished rendering quality. All the best and thanks again.
Resolve 19 is not released yet. 19 beta is out, which is what you got and what we linked. Also, I made this entire video completely for free which took over 7 hours with editing to make… …the internet is a strange place, people are still ungrateful even when you give them something for free that took you many hours to make…
Thanks. I want to use da Vinci to make film clips for instagram from image sequences made in a 3D modelling program. All advice /help gratefully received!
🔴GEAR WE USE FOR FILMING & EDITING amazon.com/shop/alliandwill
🎵MUSIC & SOUND FX WE USE IN OUR VIDEOS bit.ly/2NPCjd7
👉GET 50% OFF OUR EDITING PRODUCTS alliandwill.com/featuredproducts
I've been watching a whole lot of DVR tutorials in the recent past, and yours perfectly hits the spot - not too slow, covers basics and a tad more so that it keeps the interest levels up. All in all an excellent tutorial. Thank you!
Glad it was helpful! We have dozens more that cover more in depth features!
Thank you so much for this lesson! I just got a M3 Mac air and I decided to go big, learning one of the toughest editing programs DaVinci resolve. I am not going to lie I played back this video back numerous of time, I got frustrated because I am also new to the the Mac book so it has been tough, but so worth it, once I got through the whole video!! welting up a bit because I feel so accomplished learning from this video. Thank you for taking the time so us newbies can have a shot at the knowledge to hang with the big dogs knowing DaVinci resolve.
You’re welcome! Good luck!!
Great video with some very helpful information. Could you please do one to show how to delete a video clip in the middle of a timeline without the rest of the following clips on that track jumping backwards and throwing them out of alignment with the tracks above and below the track in question. Essentially, I sometimes just need the gap left when deleting a clip fro a track to be able to insert a different clip of the same length.Thank you.🙏❤️
Glad it was helpful! To answer your question; simply select the clips you want to delete, and hit the backspace, or delete key on your keyboard! This will delete only those selected clips and will not ripple delete your clips in the timeline. That being said, we do have a newer video 'How To Edit 10x Faster' that you may find helpful: th-cam.com/video/-8keOMaU9mY/w-d-xo.html
@AlliandWill Thank you. When I normally delete a clip it moves the next clip backwards over where the previous clip was, instead of maintaining a space. I'll try it using the backspace key next time as you suggest,
You brought up some useful points that I wasn't aware of even after using DR for a couple of years now, thanks!
Appreciate your comment Mark! Glad it helped
Thank you , it was very helpful for me as first time opening this app
Really good. I've been using DVR for about a year now, and I learned two new tricks today, so thank you.
Appreciate your comment! Glad it was helpful!!
Clearly you are expert and thank you for such a complete course covering so much in such a short time. I have been finding getting the files into the project not easy. No doubt after the first time it will be easy. What file types will import? I’m guessing mp4 is easy.
Thanks! We use .mp4 but many file types are supported!
Really fantastic tutorial! I’m still trying to get more comfortable with Davinci - I definitely learned a lot from this!
Thanks Dustin!!
Excellent video tutorial! I'm new to Davinci and have a few questions.
1. Is there a way to increase the size of the audio meter on the right side of the edit page without switching to the fair light page? It is very small.
If I set the GUI to 200% what would that change?
2. How do you reset the timeline timecode to zero vs the default 1 hour readout?
3. The single preview mode I prefer to use seems to cut a little headroom off the talking head. I think it's set to fit or 100%
4. Other than the mono option on the timeline, is there another way to copy right to left or left to right audio channels on a clip that has one channel only?
5. Do you have a multi-cam tutorial video?
6. Is there a .mov export codec option in export in the free version and what is the max kbps bit rate we can type in other than 80,000?
7. I watched you beginner node video on color correction about there needs to be a separate node for each adjustment like gamma, highlights, contrast etc. a node for each vs. all in one adjustment. That helped a lot.
8. There are some pretty nice 3D premade fusion titles that are thick and have cool animations. I'll learn to create one from scratch sometime if you have a tutorial video on 3d Titles.
9. How do I get the singe preview window mode to max out in size where it is very wide? Im using a high end pro laptop with 4K 3840 X 2160 screen resolution. I also always film and edit in UHD.
10. Are the built-in sound FX and music library copyright free and can they be used commercially beyond TH-cam?
I appreciate any info on the above questions.
excellent tutorial.
Thanks!
Hi Alli, Why do you prefer frame rate 23.976 to 24? What's the difference? I'm a very beginner. Thank you for the awesome video.
The answer is VERY complicated and has to do with standards that were implemented from many years ago for broadcast tv. (Has to do with syncing sound and picture and working with the electrical grid frequency in North America known as NTSC).
If you’re uploading videos to the internet, it won’t matter which you use.
Thank you, best DaVinci videos on TH-cam!
Thank you!!
Can I also use a .png file to cover the video but leave the audio like you did with the video?
At 3.50 you describe tabbing over to finder window ?? I'm on a PC so how does that correspond ?
Alt + tab
Please creat the in depth video u r great
Thank you so much, I had no idea you could export a project. So helpful
you're welcome!
Another fabulous job. But Alli, one major error. I sincerely hope Will and you didn't get only this terrible weather the whole time you visited the West Coast. Honestly, it isn't this terrible soggy weather all the time. Hope you two have, or will be, holidaying here again when the sun travels from Hawaii as usual!!!
Thanks so much! Appreciate your kind words!!
Excellent video tutorial! I'm new to Davinci
HELP - I'm lost on one thing.
My apologies, this is surely the simplest (maybe dumbest) question you will get today... Are Davinci Resolve project settings ONLY used for the actual editing process on the computer, and nothing else?
In other words, when I put my media into a Project, are "PROJECT SETTINGS" only to help me edit things in a smooth and consistent manner, OR are these settings exactly like what I will ultimately render and save. I probably asked that in a confusing way (because I AM confused), but just want to know what is the actual PURPOSE of project settings - Just for Editing OR Both editing and the final saved video? Anyway - THANKS for your video and your channel (Subscribed now).
If you don’t know, then it’s a great question! Project settings are for while you are editing. They help make sure your project matches the footage you’re working with to maintain quality. For example; If your footage is HD, and you set up your project settings to be HD, when you export, you can choose to export at a different quality setting vs what your project was set up for, but for most, keeping things consistent is the best choice. Project settings are different than exporting settings, but things should be kept consistent to preserve quality.
Hope that helps!
@@AlliandWill THANK you so much - THAT is exactly what I was asking. Maybe not quite so confused now.
Believe it or not, no instruction I can find online actually clarifies that precept - Kind of "The elephant in the room" stuff, I guess. I just wanted to know how media, and project settings, and final video really interrelate format and quality-wise. Understanding this now (thanks to you) allows me to edit videos in the simplest and quickest ways possible without too much concern about the finished rendering quality.
All the best and thanks again.
You’re welcome! Thanks for the question!
Biggest problem I have is my footage being from my phone has to be converted from mov file instead of mp4
Download in the link below.
There's dozens.
None get me to a 19 Download.
Tried the closest 19 beta.
Wasted 2 hours.
Resolve 19 is not released yet. 19 beta is out, which is what you got and what we linked. Also, I made this entire video completely for free which took over 7 hours with editing to make… …the internet is a strange place, people are still ungrateful even when you give them something for free that took you many hours to make…
@AlliandWill
Apologies. I was having a bad day. ☹️ It was my GPU. 😔. Your PC is awesome. 🧡 I just liked and subscribed..
Thanks. I want to use da Vinci to make film clips for instagram from image sequences made in a 3D modelling program. All advice /help gratefully received!