whole button combo (from service manual) Volume + & Bluetooth Long press > 10s Enter HID DFU mode in On Mode. Volume + & Play Long press > 2s Reset to factory default in On Mode. Volume - & Bluetooth Long press >10s Enter by-pass mode in On Mode. Volume - & Play Long press >10s Enter Regular DFU mode in On Mode. Volume - & Link Long press > 2s Show SW version in On Mode. Volume + & Link Long press >10s Enter Demo mode in On Mode. Plus: & Power Long Press >10s Exit from any DFU mode & Link Short Press changes EQ and pressing again reverts back to original (barely noticeable in mids)
There is a huge misunderstanding about the "Low frequency mode": 1. This mode is not turned on, as soon as the speaker is turned on, you turn it on when you hold the button combination. 2. You should not ever use this mode, it disables dsp on the speaker, meaning the speaker has no limits. If you turn the speaker up 70+% Volume, the amp will start to get stressed and starts making distortion and overexcursion. If you use it long enough, the speaker(s) will melt the glue and break.
@Strkez Jr I'm so excited to share with you, how to connect ANY JBL speaker you have to your everyday devices like: computers, laptops, tablets, phones, and so on. It's definitely a life-changing experience. Check it out! th-cam.com/video/SExoNDrhMfI/w-d-xo.html
Same. Last time I tested (cant get it to work on my Charge 5 now FSR) it seemes like it simply bypasses the eq and limiter used to optimize the sound for the drivers, so it sounds like trash and makes it easy to blow out the drivers. In fact, you should never use this mode on JBL Flip 6 especially as it doesnt seem to have a hardware crossover so its gonna drive a full range signal to the tiny tweeter cone blowing it out in minutes to seconds depending on the content. Now I wonder if its safe to use my Charge 5 in service mode (bluetooth and play button combo) to play audio over usb. It doesnt seem to alter the sound in any way but you never know
Thank you so much for the tips! I’m still trying to keep my old Flip 5 alive and have had numerous issues with it lately since it’s getting old. Your video helped me to keep it going, even though it still shuts off by itself now and then! 😂😩. Oh well, that’s technology and it is getting old. Love the sound though and will be sad when it goes to Bluetooth Speaker Heaven! Ha! Take care and thank you for your post my friend! Justin form Pennsylvania, USA
Thank you for the interesting question. I don't remember I ever heard warnings sound for the low battery. After some research everybody actually try to figure out how to disable it. Out if curiosity, what is the model of your JBL speaker, and when the warning sound stopped working? What is the current version of the firmware, Maybe it's stopped after update? When give me the details I will reach out to the support of JBL and try figure out If there's something we can do about it.
I got 2 of these about 9 months ago, lfm was already on as i just found out. Without it, they just sound dry and cheap. I don't usually go louder than about 50% maybe 75% for some songs... it's not going to hurt the speaker as long as you don't push it to distortion. With lfm disabled, I tried full volume, it was horrible and distorted, go figure. If you're using them where you need to keep the bass down, disable lfm.
Hello , I am not able to do anything in my speaker ...i can't even pair new device neither the reset button works ...nothing works at all ...only it just on and off ....Any help please
Wow, that is a really interesting question. I don't know how to measure the wats of the JBL FLIP 5 speaker when it's on low mode frequency, but I definitely can tell that when you activate the low-frequency mode, that makes the speaker louder. For this reason, we need to be cautious not to maximize volume since it can damage the speaker. But if you use the speaker mindfully, you can enjoy a better sound and keep the speaker safe. Let me know if you have more questions.
No , low frequency isnot what you think , is a debug mode for testing the frequency and other things , the speaker will heat up quickly and drain the battery quickly , if it heats up too much the speaker will be broken , don't do it
Hey! Are there any other speakers that can do this? (I run a speaker for background music all day and am looking for small portable options with a 3.5mm or USBC streaming). Marshall, Klipsche and Sony portable options would be great.
Thank you so much for the lovely response, I really appreciate it! 🙏 By the way, we have a lot more great content on the channel, So I recommend you subscribe to our channel. I wish you a wonderful day 🌞
@Alifered adriu I'm so excited to share with you, how to connect ANY JBL speaker you have to your everyday devices like: computers, laptops, tablets, phones, and so on. It's definitely a life-changing experience. Check it out! th-cam.com/video/SExoNDrhMfI/w-d-xo.html
Wow ☺️ Thank you so much for such an amazing comment, I really appreciate it! 🙏 I'm really glad the video helped you. By the way, we have a lot more great content on the channel, So I recommend you subscribe to our channel. I wish you a wonderful day 🌞
@Kevin Miller It sounds like you are having some issues with your Flip 5 speaker. Here are a few things you can try to troubleshoot the issue: Make sure the speaker is fully charged. If the battery is low, the speaker may not turn on or reset properly. Try resetting the speaker by pressing and holding the power button for 10 seconds. This should reset the speaker and allow it to turn on. If the speaker still will not turn on or reset, you may want to try connecting it to a power source using a different cable. This could help to determine if the issue is with the cable or the speaker itself. If none of these steps help, you may want to try contacting JBL support for further assistance. They may be able to provide additional troubleshooting steps or repair options. I hope this helps! Let me know if you have any other questions or need further assistance.
I have a huge problem with my JBL Flip 5, it automatically turns on indefinitely, the only way to turn it off is to hold the on/off button but to turn it back on you have to plug it in (I factory reset it but that doesn't change the problem) Please help me :(
Thank you for sharing the issue your have. Try this out: 1) Plug your JBL 2) Hold Bluetooth pairing + PLAY button for 5/10sec 3) you'll hear The Start-up Sound 4) Unplug Let me know if it help.
@@LevinsReview now, the JBL can’t be connected/pair to a device and can’t turn off. I'm desperate, I'll take it for repair Anyhow, thanks for your help
The Flip 5 when fresh out the box already comes with the bass / Low Frequency. I just learned how to turn it off and I hate it lol I got use to the bass! So I’m going to put it back on. With no bass it sounds like a cheap as speaker from wish !
I'm so exited for you! JBL Speaker is so amazing, I agree with you 💯 percent once you experience the low frequency mode, it's impossible to go back. The speaker losses it's magic.
Its absolutely not wrong, don't use it if you hate it so much. I have jbl flip 5 for years and this mode is absolutely 💯 upgrading the sound. If you dislike it so much disable the mode, just don't use it!
To exit the service mode, you need to plug the speaker into a power source, and press the Bluetooth and Play buttons at the same time. Hold the buttons until the speaker automatically turns off. Once the speaker turns off, you have exited the service mode. You can now turn the speaker on, and it will work normally. Let me know how it goes. By the way, on Sunday, premiered really surprising hack for new JBL models, I recommend watching it: th-cam.com/video/SExoNDrhMfI/w-d-xo.html
@@LevinsReview Hi. Thanks for the advise. I did how you told me, I plug the power cord, lights charging blinking and then pressing bluetooth and play for 40 seconds and nothing happened. I tried 2 times. I will try to drain all the battery as a charger and then look for unbrick again. If you have another procedure, I will be waiting. Thanks.
Did she say " BASS " as in fish instead of " BASS" as in sound? Also, why does she tuck the lanyard underneath the FLIP durning the demo? She's cute but the accent was a little difficult to understand. Finally is that a Gibson SG guitar? Do you play? What a beautiful room you have . Thanks Ruth.
First of all, thank you for sharing your video. Even though I tried the reset technique (hold play+volume plus) you showed, I can't reset it. Do you have any other suggestions in such a case?
Thank you so much for the lovely comment, i appreciate it so much. This is basically the only way i found to reset the speaker, could you explain to me the issue you experience maybe we can find a solution.
@Erhan Bekkaya I'm so excited to share with you, how to connect ANY JBL speaker you have to your everyday devices like: computers, laptops, tablets, phones, and so on. It's definitely a life-changing experience. Check it out! th-cam.com/video/SExoNDrhMfI/w-d-xo.html
Thank you so much for the lovely response, I really appreciate it! 🙏 By the way, we have a lot more great content on the channel, So I recommend you subscribe to our channel. I wish you the best of all 🌞
Is it normal for JBL flip 5 when turning it off, there is feedback tone? And the play button and up and down buttons are not functioning. But still connecting to my iPhone 13 pro max
Thank you for sharing your issue with us 👍 When you turn off JBL flip you definitely should hear sound accordingly to your description it feels like your jbl FLIP 5 has a hardware issue, i would reset the speaker by pressing the play button and the volume up button and see if it solves the issue and if not then how awful the problem is? Does your speaker work properly? Does it connect to your devices? If your warranty is still relevant then i would activate it. If the warranty has expired then and the issues makes it impossible to work with your speaker then i would contact the technician .
@Ren Labos I'm so excited to share with you, how to connect ANY JBL speaker you have to your everyday devices like: computers, laptops, tablets, phones, and so on. It's definitely a life-changing experience. Check it out! th-cam.com/video/SExoNDrhMfI/w-d-xo.html
For whatever reason, none of those button combinations did what your speaker did in the video. The only lights that would blink were the charger, and only change is now I don't have max volume feedback sound.
Hi, this is a very informative video. however, I have jbl flip 3 and maybe you can help me fix it. 🥺 When I turn it on, it's stuck on white light and won't connect to my device. I usually press the Bluetooth button to turn it to blue light but now it's stuck on white light. Please, help meee.. 🥺
Thank you so much for sharing your issue with us. Press and hold the play and the volume + buttons at the same time for 5 seconds. The device will power off as it restores to the factory default. Power on your Flip 3 again, and it will have been restored to the factory default. Let me know if it works.
@Michael Deng thank you for sharing this issue. I know that when the party boost is activated, it locks Bluetooth connectivity, so make sure the party boost is turned off. And if you never turned on the party boost, did you try resetting your speaker? Other than the Bluetooth, does your speaker works well?
what if the speaker only play with a cord in it? i know know what i did but when i plug it into my game console it’ll only turn on and play for that but it won’t turn on or play when nothings plugged in even when it says the battery’s full
Thank so much for sharing with us your issue. What the model of JBL you are using ? I'm asking this question because the USB-C port of JBL Flip 5 only serves as a power outlet for the speaker, and it can't be used for connecting devices to play sound. So I wondering how to you can plug it to your console and make it play.
I wanted to reinitialize my bbl but I made a mistake. I pushed the buttons volume up and bluetooth but now it is stuck and I can't turn it off. On the battery line, there is mostly white but a little of red at the right. What do I do ?
Ive only had my jbl flip 5 for less than a year an just last month my son threw it in a cooler with ice cold water. But i quickly took it out. It worked the rest of the day but now it wont turn on. I left it charging for 2 days an i saw the lights come on that said battery fully charged so i tried turning it on an it never turned on an i cant get the lights to come on when on the charger is done for? :(
Thank you for sharing the issue. I guess that cooler with ice cold water is not deep .... does the speaker was underwater and for how long? Maybe you set your speaker by mistake on service mode? Try this out: 1) Plug your JBL 2) Hold Bluetooth pairing + PLAY button for 5/10sec 3) you'll hear The Start-up Sound 4) Unplug Let me know if it help.
Hi, do anyone have a tips to stuck / fix, something like that, the JBL Flip 5 in a car ? Because it's difficult to let it on the dashboard with is form (it roll when the car move :p)
My speaker was cutting my connection from my phone and when I tried to do what you are saying to reset it, now nothing is responding. The lights are on but nothing is working, I can't even turn it off😢
thank you for sharing your issue. I want to understand it better, you are connected your JBL speaker to your computer by pressing on the Bluetooth button, right? Now you able to play music, but you can't control the volume? You cat control the volume from the computer or from the speaker or both? which Operating System is running on your computer (Windows or MacOS)?
Bluetooth problem . My JBL Flip 5 (firmware version 0620) has an audio stutter. I have identified this to be linked to my bluetooth K380 Logitech keyboard. 1) When both are on; there is an audio stutter on my JBL Flip 5. 2) Switch off (bluetooth) K380 Logitech keyboard; audio stutter stops immediately. What I have tried : a) Delete an re-install all related bluetooth devices. b) update drivers Additionally I have a SONY SRS-XB12 speaker (bluetooth) No audio stutter problem
low frequency mod is not safe as it disables all safety precautions such as the bass the speakers have a limit untill the bass radiator go boom or get really damaged
@Balu Krishna .S I'm so excited to share with you, how to connect ANY JBL speaker you have to your everyday devices like: computers, laptops, tablets, phones, and so on. It's definitely a life-changing experience. Check it out! th-cam.com/video/SExoNDrhMfI/w-d-xo.html
Mm, my flip 5 don't Wanna connect with any cellphone i don't know whats going on, but i was updating the software by the app but after that y was using the speaker properly than it was like bad working and it's turn on but i can't connect with the speaker i did all hard reset the mode conection as you did with party Botton and volumen dowm but it didn't work
Help me up with this please , said to me ir that Is for the battery o something because when i increased the all volumen it was like with interferences
@Reinz Anthony Padpad I'm so excited to share with you, how to connect ANY JBL speaker you have to your everyday devices like: computers, laptops, tablets, phones, and so on. It's definitely a life-changing experience. Check it out! th-cam.com/video/SExoNDrhMfI/w-d-xo.html
Had the same question. They suck for not putting a simple command as to play previous track. I came into this video hoping someone had the "secret" answer. Ughh. But I learned something new at least.
Its genuine upgrade of JBL , its should be safe. But keep in mind device can be negatively effected from upgrade, so you do taking kind of risk. And the upgrade process as i show in the video should be similar to most of the devices.
@Granit Ndexzy That you for sharing your issue. to assists you with the best i can i need more details. What is the Model of your JBL speaker? Does all the lights of the speaker are turned on or off? did you press buttons combination that led to the current state?
@Ismael Raúl Molina Beamud Estoy muy emocionado de compartir con ustedes cómo conectar CUALQUIER altavoz JBL que tenga a sus dispositivos cotidianos como: computadoras, computadoras portátiles, tabletas, teléfonos, etc. Definitivamente es una experiencia que cambia la vida. ¡Échale un vistazo! th-cam.com/video/SExoNDrhMfI/w-d-xo.html
@@abdullah-kr5ns أنا أفهم المشكلة. في هذه الحالة ، إنها مشكلة جسدية. ربما حدث شيء ما للمشعات أو السماعات نفسها. راجعت كيف يمكن التعامل معها. لإصلاح هذه المشكلات ، عليك استثمار بعض الوقت والجهد في مشاريع DIY. أعتقد أنه سيكون من الأسهل بكثير تنشيط الضمان الخاص بك أو الاتصال بفني.
Thank you for the question 😃 This video is based on jbl flip 5 so I don't know if it will work with other models the same way. Wish you the best of all 🌟
@George Likimani Thank you so much for the great question. Low-frequency mode makes the passive bass radiators move a lot more. Which emphasizes the bass, and deep bass makes the music so much better. You can see the difference I demonstrate 1:16 JBL Flip 5 TEST Low-Frequency Mode vs. Normal Moreover, when you activate the low-frequency mode, that makes the speaker louder. For this reason, we need to be cautious not to maximize volume since it can damage the speaker. But if you use the speaker mindfully, you can enjoy a better sound and keep the speaker safe. Let me know if you have more questions. Also, we have more great content on our channel that you can take advantage of, so I strongly recommend subscribing. I wish you the best of all!!!
@Noor Pannu No, because this is a mode that disables DSP, which unlimits the speaker. People have used this dsp off to completely kill their speakers for abusing the battery, the amp and the driver(s)
Thank you for the great question. At normal mode, JBL FLIP has bass, but it's very vague. Which is very wired because the satisfying bass is supposed to be the highlight of this speaker. When the low-frequency mode is turned on, you actually can hear the big difference. to understand, i recommend you watch the comparison between the normal mode and the bass mode 1:17 let me know if you have more questions. By the way, we have a lot more great content on the channel, So I recommend you subscribe to our channel. I wish you a wonderful day 🌞
@@LevinsReview Do not increase the volume? But how to understand it? How loud can I listen to the speaker in lfm mode so that it doesn't damage the speaker. 50% Vol or less?
When the speaker work very hard you will become jarring. So I recommend to play soundtrack or song that you know very well , then decrease the speaker to the lowest volume. And gradually increase it. when the volume feels right then test if through the the loudest picks of the song / soundtrack. If the sound the is clean and if feels right keep it. But if you are too worried about it, then don't use the LFM mode.
@cyn pan I'm so excited to share with you, how to connect ANY JBL speaker you have to your everyday devices like: computers, laptops, tablets, phones, and so on. It's definitely a life-changing experience. Check it out! th-cam.com/video/SExoNDrhMfI/w-d-xo.html
WOW, You're welcome 😊 I so happy you enjoyed the video. Thank you so much for supporting our channel, I appreciate It a lot! I wish you the best of all
Does this applies to JBL pulse 4? Mine got stuck it it turns on but eventually it doesn't respond and only the power button light stays on. Thanks in advance
Thank you so much for sharing your issue. The video applies to JBL FLIP 5 , but i have few suggestions. Hold the power button for 30 to 40 sec and then press the power button 5 times quickly Let me know if it help.
Try the following combinations: 1. Try resetting it by pressing Bluetooth and volume up for a few secs until it shutdown then turn it on again to see if it's fix. 2. if the first combination is not helping then push the volume up, play, and volume down button down until the battery indicator disappeared. If nothing helps maybe its hardware issue, and you should connect with JBL support. Let me know how it goes.
@@LevinsReview thanks for the help I found out that pressing the play and volume up for a few seconds than the power button it starts but when I turn it off and try to turn in on again it does the same thing . Like you said it must be a hardware problem unless there's an update on reset online . Thanks so much for your time and help
I have problem with mi Flip 5, I try all you say but i dont find answer my problem. I have problem with mi Flip 5, I try all you say but i find answer my problem. It happens that when I press any button the charging bar lights up, it won't let me restart or pair with new devices. What can i do?
@Jimmy Bustos Thank you for sharing with us your issue! I'm familiar very well with this situation, probably you press on the Bluetooth button and the volume up button at the same time and as a result, JBL is in the download mode. to exit this mode press on the power button until the speakers are turned off then turn on the speaker once again. then turn on the speaker once again and everything should be back to nornmal. Let me know it if works for you. By the way, we have more great content that you can take advantage of so i strongly recommend subscribing to the channel. I wish you the best of all!
Thank you for the great question. In JBL FLIP 5 has pretty basic functionality, it doesn't have option to block other devices from connecting to your JBL FLIP 5. But if found that if you press on the party boost party button its blocking other devices from connecting to your JBL. I'm not sure if it works continuously also after rebooting JBL, but let me know if it works for you.
Its should be oprittty much the same Press on the Bluetooth and the play/pause buttons. The speaker will enter to the service mode. And from there continue with the steps as i show in the video.
This is a really good question, thank you for sharing your issue! does your JBL is charged? When you try to charge your JBL does the light of the battery is turned on?
@Fede Rouiller Lamento mucho escuchar que está experimentando problemas con su altavoz. Pero haremos todo lo posible para resolverlo. ¿Cuál es el modelo exacto de su altavoz JBL? ¿Cuál es el estado actual del altavoz? ¿Por qué desea restablecer el altavoz? ¿Tu JBL enciende normalmente? los botones responden bien?
@@LevinsReview el modelo de mi altavoz es un JBL Flip 5 todos los botones andan perfecto y la razón por la que quiero restablecerlo es que no me conecta a Bluetooth ni aparece en mi dispositivo la posibilidad de conectar
@@federouiller6555 Muy bien, parece que tu JBL no está en perfectas condiciones y el reinicio debería funcionar perfectamente. Quiero asegurarme de que está presionando el botón de reproducción y luego el botón de subir volumen al mismo tiempo. El botón está pensado, así que presiona los botones lo más fuerte que puedas hasta que el altavoz JBL se apague. Déjame saber como va.
Thank you for the question! Did your press the Bluetooth button and the low volume button ? you should press the buttons continually for a few seconds until all the lights of JBL is turned off the then turned on once again?
Lfm is a mode made to see if there is any problems in the system. If you use it alot it will tear ur passive radiators up and rip them trust me ive lost a nice speaker due to lfm. Hope you dont make the same mistake as me.
@@dlowelmao2062 I figured it out. So what's your advice for using low frequency mode? Think ill be okay if I only use it on 50 percent volume and less?
@@LevinsReview false alarm bc i need the speaker max volume or 70 to 100 and flat equalizer will boost the bass up more so my jbl flip 5 keep dancing harder than normal and the bass can blow out my flip 5 at any moment lol:))
I completely understand you, i decently speed with my talking when I'm super exited. To solve this inconvenience you can go to settings of the video , choose payback speed and slow me down 😄 I hope it helps, i wish you the best of all 🌟 ❤
@Christo Louis Violinist Thank you so much for response, By the way, we have a lot more great content on the channel, So I recommend you subscribe to our channel. I wish you a wonderful day 🌞
ENJOYED and received VALUE from the video SUBSCRIBE for more: bit.ly/LevinsReview
➡JBL FLIP 5: amzn.to/3gTQDjt
whole button combo (from service manual)
Volume + & Bluetooth Long press > 10s Enter HID DFU mode in On Mode.
Volume + & Play Long press > 2s Reset to factory default in On Mode.
Volume - & Bluetooth Long press >10s Enter by-pass mode in On Mode.
Volume - & Play Long press >10s Enter Regular DFU mode in On Mode.
Volume - & Link Long press > 2s Show SW version in On Mode.
Volume + & Link Long press >10s Enter Demo mode in On Mode.
Plus:
& Power Long Press >10s Exit from any DFU mode
& Link Short Press changes EQ and pressing again reverts back to original (barely noticeable in mids)
What are the last 2 points? What comes before the & ?
Omg, it was already activated and I didn't even know lol... Thanks for the video and information.
@Didi this is AWSOME! Glad I could help!
There is a huge misunderstanding about the "Low frequency mode":
1. This mode is not turned on, as soon as the speaker is turned on, you turn it on when you hold the button combination.
2. You should not ever use this mode, it disables dsp on the speaker, meaning the speaker has no limits. If you turn the speaker up 70+% Volume, the amp will start to get stressed and starts making distortion and overexcursion. If you use it long enough, the speaker(s) will melt the glue and break.
thank you, I wish you a wonderful day!
@Strkez Jr I'm so excited to share with you, how to connect ANY JBL speaker you have to your everyday devices like: computers, laptops, tablets, phones, and so on. It's definitely a life-changing experience. Check it out! th-cam.com/video/SExoNDrhMfI/w-d-xo.html
Thas what i was tellin you
Same. Last time I tested (cant get it to work on my Charge 5 now FSR) it seemes like it simply bypasses the eq and limiter used to optimize the sound for the drivers, so it sounds like trash and makes it easy to blow out the drivers. In fact, you should never use this mode on JBL Flip 6 especially as it doesnt seem to have a hardware crossover so its gonna drive a full range signal to the tiny tweeter cone blowing it out in minutes to seconds depending on the content.
Now I wonder if its safe to use my Charge 5 in service mode (bluetooth and play button combo) to play audio over usb. It doesnt seem to alter the sound in any way but you never know
@@TheEnderFlash it doesn't have LFM charge 5 and flip 6
I just brought 3 days ago ..and i love it
I just bought it like an hour ago
great video! love your accent. where are you from?
Thank you! This worked to get my JBL Flip to pair with the Fire tablet (which is was refusing to do).
This is absolutely incredible ☺️
I'm so happy the video was helpful for you, thank you for sharing it.
I wish you the best of all 🌟
Thanks so much. I had no clue you could activate these features on the Flip 5 considering it's a budget speaker. I have one so I'll give it a try
Awesome I hope it will work perfectly for you
Thank you so much for the tips! I’m still trying to keep my old Flip 5 alive and have had numerous issues with it lately since it’s getting old. Your video helped me to keep it going, even though it still shuts off by itself now and then! 😂😩. Oh well, that’s technology and it is getting old. Love the sound though and will be sad when it goes to Bluetooth Speaker Heaven! Ha! Take care and thank you for your post my friend! Justin form Pennsylvania, USA
Dear Ruth, need your help. How can I get the low battery warning sounds to work again? Thanks for your help.
Thank you for the interesting question.
I don't remember I ever heard warnings sound for the low battery. After some research everybody actually try to figure out how to disable it.
Out if curiosity, what is the model of your JBL speaker, and when the warning sound stopped working? What is the current version of the firmware, Maybe it's stopped after update?
When give me the details I will reach out to the support of JBL and try figure out
If there's something we can do about it.
Love this young lady. Have and continue to watch and learn from her👍🏼
Thank you so much!
I got 2 of these about 9 months ago, lfm was already on as i just found out. Without it, they just sound dry and cheap. I don't usually go louder than about 50% maybe 75% for some songs... it's not going to hurt the speaker as long as you don't push it to distortion. With lfm disabled, I tried full volume, it was horrible and distorted, go figure.
If you're using them where you need to keep the bass down, disable lfm.
Thx for helping fix my problem!
That you for sharing your success, I'm so exited the video was helpful for you 🙌
I wish you the best of all 🌟
Wow this is amazing. It works
That is so awesome, thank you for the great comment. I'm so excited the video was helpful .
I wish you the best of all 🌟
I love her accent! Where do you think she's from? Russia?
Hello , I am not able to do anything in my speaker ...i can't even pair new device neither the reset button works ...nothing works at all ...only it just on and off ....Any help please
It is true that jbl flip 5 in low frequency mode become 30 watts speaker???
Wow, that is a really interesting question. I don't know how to measure the wats of the JBL FLIP 5 speaker when it's on low mode frequency,
but I definitely can tell that when you activate the low-frequency mode, that makes the speaker louder. For this reason, we need to be cautious not to maximize volume since it can damage the speaker. But if you use the speaker mindfully, you can enjoy a better sound and keep the speaker safe.
Let me know if you have more questions.
no, amplifier maybe gives 30w but to a 20w speaker
No , low frequency isnot what you think , is a debug mode for testing the frequency and other things , the speaker will heat up quickly and drain the battery quickly , if it heats up too much the speaker will be broken , don't do it
i cant understand you
Hey! Are there any other speakers that can do this? (I run a speaker for background music all day and am looking for small portable options with a 3.5mm or USBC streaming).
Marshall, Klipsche and Sony portable options would be great.
thank u so much.....u really blew my mind🤯
Thank you so much for the lovely response, I really appreciate it! 🙏
By the way, we have a lot more great content on the channel, So I recommend you subscribe to our channel. I wish you a wonderful day 🌞
@Alifered adriu I'm so excited to share with you, how to connect ANY JBL speaker you have to your everyday devices like: computers, laptops, tablets, phones, and so on. It's definitely a life-changing experience. Check it out! th-cam.com/video/SExoNDrhMfI/w-d-xo.html
Thanks gor the help. Your accent reminds me very much of Valentina Shevchenko. Shes from. Kyrgyzstan. Its such a lovely accent. Have a great day.
Wow ☺️ Thank you so much for such an amazing comment, I really appreciate it! 🙏
I'm really glad the video helped you.
By the way, we have a lot more great content on the channel, So I recommend you subscribe to our channel.
I wish you a wonderful day 🌞
@@LevinsReview i did subscribe because you did such a great job reviewing this item. Have a great day. Thanks
Thank you so much , I appreciate it a-lot!!!🙌
Thank you so much.. your been very helpful 🙏💯💥
You’re welcome 😊
You just make me happy with my friends
That is awesome, happy you enjoyed 👏
My flip5 is not resetting, the only thing working is the on/off button. Also it is not lighting up around power/bluetooth. HELP ME PLEASE.
@Kevin Miller It sounds like you are having some issues with your Flip 5 speaker. Here are a few things you can try to troubleshoot the issue:
Make sure the speaker is fully charged. If the battery is low, the speaker may not turn on or reset properly.
Try resetting the speaker by pressing and holding the power button for 10 seconds. This should reset the speaker and allow it to turn on.
If the speaker still will not turn on or reset, you may want to try connecting it to a power source using a different cable. This could help to determine if the issue is with the cable or the speaker itself.
If none of these steps help, you may want to try contacting JBL support for further assistance. They may be able to provide additional troubleshooting steps or repair options.
I hope this helps! Let me know if you have any other questions or need further assistance.
I think when u buy flip 5 already set to lfm like mine. When i set to normal mode the sound seems so plain.
Yes it does my friend
Yes it does my friend
I have a huge problem with my JBL Flip 5, it automatically turns on indefinitely, the only way to turn it off is to hold the on/off button but to turn it back on you have to plug it in (I factory reset it but that doesn't change the problem)
Please help me :(
Thank you for sharing the issue your have.
Try this out:
1) Plug your JBL
2) Hold Bluetooth pairing + PLAY button for 5/10sec
3) you'll hear The Start-up Sound
4) Unplug
Let me know if it help.
@@LevinsReview now, the JBL can’t be connected/pair to a device and can’t turn off. I'm desperate, I'll take it for repair
Anyhow, thanks for your help
@@firou91 oh... I'm sorry to hear that. Did it stopped working after applying the buttons combination? I hope your JBL flip 5 will be fixed.
@@LevinsReview yes, but now no combination works :(
@@firou91 hey did you get it to work I am also having the same problem with mine
The Flip 5 when fresh out the box already comes with the bass / Low Frequency. I just learned how to turn it off and I hate it lol I got use to the bass! So I’m going to put it back on. With no bass it sounds like a cheap as speaker from wish !
I'm so exited for you!
JBL Speaker is so amazing, I agree with you 💯 percent once you experience the low frequency mode, it's impossible to go back. The speaker losses it's magic.
Its absolutely not wrong, don't use it if you hate it so much. I have jbl flip 5 for years and this mode is absolutely 💯 upgrading the sound. If you dislike it so much disable the mode, just don't use it!
You are correct, it comes with the Bass Boost enabled right out of the box. All we learned here is how to make the speaker sound like crap.
Hey did this bluethoot and play button on my charge 5 now power button just blink once and it does not turn on how to fix
How do you unbrick from service Mode a jbl charge 4? Blinking light when charging but when turn on, only sound of Power Up and then Power Off.
To exit the service mode, you need to plug the speaker into a power source, and press the Bluetooth and Play buttons at the same time. Hold the buttons until the speaker automatically turns off. Once the speaker turns off, you have exited the service mode. You can now turn the speaker on, and it will work normally.
Let me know how it goes.
By the way, on Sunday, premiered really surprising hack for new JBL models, I recommend watching it: th-cam.com/video/SExoNDrhMfI/w-d-xo.html
@@LevinsReview Hi. Thanks for the advise. I did how you told me, I plug the power cord, lights charging blinking and then pressing bluetooth and play for 40 seconds and nothing happened. I tried 2 times. I will try to drain all the battery as a charger and then look for unbrick again. If you have another procedure, I will be waiting. Thanks.
For more detail, when I turn on, after 5 seconds go turn off. Always the same.
Thank you..!❤
Did she say " BASS " as in fish instead of " BASS" as in sound? Also, why does she tuck the lanyard underneath the FLIP durning the demo? She's cute but the accent was a little difficult to understand. Finally is that a Gibson SG guitar? Do you play? What a beautiful room you have . Thanks Ruth.
First of all, thank you for sharing your video. Even though I tried the reset technique (hold play+volume plus) you showed, I can't reset it. Do you have any other suggestions in such a case?
Thank you so much for the lovely comment, i appreciate it so much.
This is basically the only way i found to reset the speaker, could you explain to me the issue you experience maybe we can find a solution.
@Erhan Bekkaya I'm so excited to share with you, how to connect ANY JBL speaker you have to your everyday devices like: computers, laptops, tablets, phones, and so on. It's definitely a life-changing experience. Check it out! th-cam.com/video/SExoNDrhMfI/w-d-xo.html
Super 👍🔥
Thank you so much for the lovely response, I really appreciate it! 🙏
By the way, we have a lot more great content on the channel, So I recommend you subscribe to our channel. I wish you the best of all 🌞
Just press all buttons for 10 seconds and trust me it’s worked!! Give it a shot
Is it normal for JBL flip 5 when turning it off, there is feedback tone? And the play button and up and down buttons are not functioning. But still connecting to my iPhone 13 pro max
Thank you for sharing your issue with us 👍
When you turn off JBL flip you definitely should hear sound accordingly to your description it feels like your jbl FLIP 5 has a hardware issue, i would reset the speaker by pressing the play button and the volume up button and see if it solves the issue and if not then how awful the problem is? Does your speaker work properly? Does it connect to your devices? If your warranty is still relevant then i would activate it. If the warranty has expired then and the issues makes it impossible to work with your speaker then i would contact the technician .
@Ren Labos I'm so excited to share with you, how to connect ANY JBL speaker you have to your everyday devices like: computers, laptops, tablets, phones, and so on. It's definitely a life-changing experience. Check it out! th-cam.com/video/SExoNDrhMfI/w-d-xo.html
For whatever reason, none of those button combinations did what your speaker did in the video. The only lights that would blink were the charger, and only change is now I don't have max volume feedback sound.
Hi, this is a very informative video. however, I have jbl flip 3 and maybe you can help me fix it. 🥺 When I turn it on, it's stuck on white light and won't connect to my device. I usually press the Bluetooth button to turn it to blue light but now it's stuck on white light. Please, help meee.. 🥺
Thank you so much for sharing your issue with us. Press and hold the play and the volume + buttons at the same time for 5 seconds. The device will power off as it restores to the factory default. Power on your Flip 3 again, and it will have been restored to the factory default.
Let me know if it works.
Great video
But quick question, how do i turn off the panel/oval ring after turning it on?
try to press on the pairing button once again or turn off / on the speaker the oval ring will turn off.
@@LevinsReview k
Thank you very much for the valuable information I have a problem with my device JBL flps5 Never accepts to open bluetooth
@Michael Deng thank you for sharing this issue.
I know that when the party boost is activated, it locks Bluetooth connectivity, so make sure the party boost is turned off.
And if you never turned on the party boost, did you try resetting your speaker? Other than the Bluetooth, does your speaker works well?
what if the speaker only play with a cord in it? i know know what i did but when i plug it into my game console it’ll only turn on and play for that but it won’t turn on or play when nothings plugged in even when it says the battery’s full
Thank so much for sharing with us your issue.
What the model of JBL you are using ?
I'm asking this question because the USB-C port of JBL Flip 5 only serves as a power outlet for the speaker, and it can't be used for connecting devices to play sound. So I wondering how to you can plug it to your console and make it play.
Bro, the usb type C port is just for charging, who even uses aux in 2022, there are now much better options, bluetooth, which is wireless.
@@LevinsReview I don’t understand how I did it, all I was doing was charging the speaker on my ps and it routed the sound to come out of there
I wanted to reinitialize my bbl but I made a mistake. I pushed the buttons volume up and bluetooth but now it is stuck and I can't turn it off. On the battery line, there is mostly white but a little of red at the right. What do I do ?
Long press on the power buttons should bring back your speaker to its normal state. Let me know id it help3
Ive only had my jbl flip 5 for less than a year an just last month my son threw it in a cooler with ice cold water. But i quickly took it out. It worked the rest of the day but now it wont turn on. I left it charging for 2 days an i saw the lights come on that said battery fully charged so i tried turning it on an it never turned on an i cant get the lights to come on when on the charger is done for? :(
Thank you for sharing the issue.
I guess that cooler with ice cold water is not deep .... does the speaker was underwater and for how long?
Maybe you set your speaker by mistake on service mode?
Try this out:
1) Plug your JBL
2) Hold Bluetooth pairing + PLAY button for 5/10sec
3) you'll hear The Start-up Sound
4) Unplug
Let me know if it help.
@@LevinsReview it didnt work :( an i dont have the original receipt to get warranty from jbl
Hi, do anyone have a tips to stuck / fix, something like that, the JBL Flip 5 in a car ? Because it's difficult to let it on the dashboard with is form (it roll when the car move :p)
My speaker was cutting my connection from my phone and when I tried to do what you are saying to reset it, now nothing is responding. The lights are on but nothing is working, I can't even turn it off😢
Wow! Switch to decaf!
😄😄 this is me already decaff, I'm super pomped up when i talk about subjects i love 😉
Can you please do a tutorial as soon as possible when it comes to connecting the JBL flip 5 to a Hay Day Bluetooth record player. Greatly appreciated
Disculpe truco para subir volumen de mi parlante flip 5
My JBL flip5 is not connecting with my pc HP ENVY
I tried lot of time via C to AUDIOJACK aux cable and also with cable
Please make the same video also for JBL Flip 6. The Bass enhancement described here is not working on the Flip 6. Thank you !
Thank you for the awesome comment, unfortunately I don't have JBL Flip 6.
I wish you the best of all 🌟
What is function of party boost button
Hello, how can I play the precious song on the flip 5 ? Thanks in advance for yr reaction.
@Sdes what do you mean by precious song?
Flip5 show its charging but not getting full
hello i connect it on my pc with play button and bluetooth and i cant low the volume
thank you for sharing your issue. I want to understand it better, you are connected your JBL speaker to your computer by pressing on the Bluetooth button, right?
Now you able to play music, but you can't control the volume? You cat control the volume from the computer or from the speaker or both?
which Operating System is running on your computer (Windows or MacOS)?
Sister you deserve more subscribers 😢
Bluetooth problem .
My JBL Flip 5 (firmware version 0620) has an audio stutter.
I have identified this to be linked to my bluetooth K380 Logitech keyboard.
1) When both are on; there is an audio stutter on my JBL Flip 5.
2) Switch off (bluetooth) K380 Logitech keyboard; audio stutter stops immediately.
What I have tried :
a) Delete an re-install all related bluetooth devices.
b) update drivers
Additionally
I have a SONY SRS-XB12 speaker (bluetooth)
No audio stutter problem
How connect flip 4 and flip5 together thank you
I have a problem, my jbl does not respond to any command and to start it I have to connect it to the socket and also turn it off
Thank you for sharing your issue. Try to reset the your JBL by pressing play button and volume up button.
Let me know if it helps.
low frequency mod is not safe as it disables all safety precautions such as the bass the speakers have a limit untill the bass radiator go boom or get really damaged
Thank you for sharing your opinions, we appreciate it.
Wish you the best of all 🌟
@Balu Krishna .S I'm so excited to share with you, how to connect ANY JBL speaker you have to your everyday devices like: computers, laptops, tablets, phones, and so on. It's definitely a life-changing experience. Check it out! th-cam.com/video/SExoNDrhMfI/w-d-xo.html
@@LevinsReview thank you but i already know that 🙂
@@balukrishna.s2220 That is awesome 👏
Good luck
Mm, my flip 5 don't Wanna connect with any cellphone i don't know whats going on, but i was updating the software by the app but after that y was using the speaker properly than it was like bad working and it's turn on but i can't connect with the speaker i did all hard reset the mode conection as you did with party Botton and volumen dowm but it didn't work
Help me up with this please , said to me ir that Is for the battery o something because when i increased the all volumen it was like with interferences
Power on button+play button I was press then my jbl flip 5 not working what to do
Can I connect JBL flip 5 to tv without Bluetooth
Question: how do you play the previous song using your jbl flip 5?
Thank you for the great question 👍
Im Sorry but you can only skip songs. But not Playing previous songs.if i find a way to do it, i will let you know.
@Reinz Anthony Padpad I'm so excited to share with you, how to connect ANY JBL speaker you have to your everyday devices like: computers, laptops, tablets, phones, and so on. It's definitely a life-changing experience. Check it out! th-cam.com/video/SExoNDrhMfI/w-d-xo.html
Had the same question. They suck for not putting a simple command as to play previous track. I came into this video hoping someone had the "secret" answer. Ughh. But I learned something new at least.
How to upgrade its firmware?? Is it safe?
Its genuine upgrade of JBL , its should be safe. But keep in mind device can be negatively effected from upgrade, so you do taking kind of risk.
And the upgrade process as i show in the video should be similar to most of the devices.
@@LevinsReview do you have video with update?
Sure, check this out
th-cam.com/video/1GAvMfgQTbU/w-d-xo.html
Let me know if you have any questions
Can you FFW or change a song by button combo on the speaker??
Thank you for the question, you can skip to the next song by double pressing the play button. Let me know if it works.
@@LevinsReview 🤩Oh, thank you so much, that is exactly the information I was looking for. THANK YOU!!
Please my JBL is stuck and I’ve pressed the Bluetooth button and the volume up button, it doesn’t still work. What should I do?
@Granit Ndexzy That you for sharing your issue.
to assists you with the best i can i need more details. What is the Model of your JBL speaker? Does all the lights of the speaker are turned on or off? did you press buttons combination that led to the current state?
¿Y para el nuevo jbl charge 5 sirven estas mismos trucos?
Si, absolutamente
@Ismael Raúl Molina Beamud Estoy muy emocionado de compartir con ustedes cómo conectar CUALQUIER altavoz JBL que tenga a sus dispositivos cotidianos como: computadoras, computadoras portátiles, tabletas, teléfonos, etc. Definitivamente es una experiencia que cambia la vida. ¡Échale un vistazo! th-cam.com/video/SExoNDrhMfI/w-d-xo.html
My JBL flip 5 is working
you mean JBL flip even doesn't turn on ? or you have other issue?
شكرا على الفديو لاكن انا لدي سبيكر جي بي ال فلب5 يوجد فيه خشه بلصوت هل لديك حل لو شمحت
شكرا لك على السؤال الرابع. ما نوع المشكلة التي تواجهها مع صوتك؟ هل يصدر صوت طقطقة؟
@@LevinsReview صوت خشه نحن نسميها في العربيه خشه انا استخدم الايفونSE2020
@@abdullah-kr5ns أنا أفهم المشكلة. في هذه الحالة ، إنها مشكلة جسدية. ربما حدث شيء ما للمشعات أو السماعات نفسها. راجعت كيف يمكن التعامل معها. لإصلاح هذه المشكلات ، عليك استثمار بعض الوقت والجهد في مشاريع DIY. أعتقد أنه سيكون من الأسهل بكثير تنشيط الضمان الخاص بك أو الاتصال بفني.
@@LevinsReview شكرا لا يوجد ضمان انا اعيش في سوريا ولبفل جاء من خارج سوريا
Hi, its working on jbl jr pop?
Thank you for the question 😃
This video is based on jbl flip 5 so I don't know if it will work with other models the same way.
Wish you the best of all 🌟
dont use low frequency, it destroys the speaker slowly
Kindly explain what is Low Frequency Mode
@George Likimani Thank you so much for the great question.
Low-frequency mode makes the passive bass radiators move a lot more. Which emphasizes the bass, and deep bass makes the music so much better. You can see the difference I demonstrate
1:16 JBL Flip 5 TEST Low-Frequency Mode vs. Normal
Moreover, when you activate the low-frequency mode, that makes the speaker louder. For this reason, we need to be cautious not to maximize volume since it can damage the speaker. But if you use the speaker mindfully, you can enjoy a better sound and keep the speaker safe.
Let me know if you have more questions.
Also, we have more great content on our channel that you can take advantage of, so I strongly recommend subscribing.
I wish you the best of all!!!
Well, dont ask why lfm was removed in flip 6, i tried it so many times, it doesnt work anymore cause it got removed
My flip 5 GG pasive radiator rips dont use lfm
Low frequency mode was already enabled new out of the box. Is that normal?
Does the low frequency feature work in jbl flip 6
Thank you for the question.
I don't have JBL FLIP 6, and i didn't tried it so I don't know.
@Noor Pannu No, because this is a mode that disables DSP, which unlimits the speaker. People have used this dsp off to completely kill their speakers for abusing the battery, the amp and the driver(s)
how to make our jbl flip , not connected by others ?
How is condition of passive radiator of flip 5 after one year?
After using JBL for over 5 years with LFM , the speaker works perfectly fine because i don't set the volume to the Max. I use it mindfully.
In Normal mode with bass boosted song can bring sound like low frequency mode??
Thank you for the great question. At normal mode, JBL FLIP has bass, but it's very vague. Which is very wired because the satisfying bass is supposed to be the highlight of this speaker. When the low-frequency mode is turned on, you actually can hear the big difference. to understand, i recommend you watch the comparison between the normal mode and the bass mode 1:17
let me know if you have more questions.
By the way, we have a lot more great content on the channel, So I recommend you subscribe to our channel.
I wish you a wonderful day 🌞
@@LevinsReview Do not increase the volume? But how to understand it? How loud can I listen to the speaker in lfm mode so that it doesn't damage the speaker. 50% Vol or less?
When the speaker work very hard you will become jarring. So I recommend to play soundtrack or song that you know very well , then decrease the speaker to the lowest volume. And gradually increase it. when the volume feels right then test if through the the loudest picks of the song / soundtrack. If the sound the is clean and if feels right keep it.
But if you are too worried about it, then don't use the LFM mode.
@@LevinsReview I have a question. Do yourself listen JBL Flip 5 with lfm mode? :)
@@raitisgobins Absolutely! when you start using LFM mode it's impossible to go back, without LFM the music sounds so dull!
IT WORKS FOR AL JBL SPEAKERS THE BASS FUNCTION
@cyn pan I'm so excited to share with you, how to connect ANY JBL speaker you have to your everyday devices like: computers, laptops, tablets, phones, and so on. It's definitely a life-changing experience. Check it out! th-cam.com/video/SExoNDrhMfI/w-d-xo.html
How can I stop the ugly on and of sound ?!
Great question, You can use equalizer app.
Thank you for this channel....I love you 😍😍😍😘
WOW, You're welcome 😊 I so happy you enjoyed the video. Thank you so much for supporting our channel, I appreciate It a lot!
I wish you the best of all
What happens when you hold the JBL's volume up and Bluetooth buttons.
Does this applies to JBL pulse 4? Mine got stuck it it turns on but eventually it doesn't respond and only the power button light stays on.
Thanks in advance
Thank you so much for sharing your issue.
The video applies to JBL FLIP 5 , but i have few suggestions. Hold the power button for 30 to 40 sec and then press the power button 5 times quickly
Let me know if it help.
@@LevinsReview thanks for the reply I did that procedure and power button turned off but after starting it again it did the same..
Try the following combinations:
1. Try resetting it by pressing Bluetooth and volume up for a few secs until it shutdown then turn it on again to see if it's fix.
2. if the first combination is not helping then push the volume up, play, and volume down button down until the battery indicator disappeared.
If nothing helps maybe its hardware issue, and you should connect with JBL support.
Let me know how it goes.
@@LevinsReview thanks for the help I found out that pressing the play and volume up for a few seconds than the power button it starts but when I turn it off and try to turn in on again it does the same thing . Like you said it must be a hardware problem unless there's an update on reset online .
Thanks so much for your time and help
I have problem with mi Flip 5, I try all you say but i dont find answer my problem. I have problem with mi Flip 5, I try all you say but i find answer my problem. It happens that when I press any button the charging bar lights up, it won't let me restart or pair with new devices. What can i do?
@Jimmy Bustos Thank you for sharing with us your issue! I'm familiar very well with this situation, probably you press on the Bluetooth button and the volume up button at the same time and as a result, JBL is in the download mode. to exit this mode press on the power button until the speakers are turned off then turn on the speaker once again. then turn on the speaker once again and everything should be back to nornmal.
Let me know it if works for you.
By the way, we have more great content that you can take advantage of so i strongly recommend subscribing to the channel.
I wish you the best of all!
Name soung pleas ??
There is a specification that the speaker can connect with three smart phones .how to connect only one smartphone I don't want that specification
Thank you for the great question.
In JBL FLIP 5 has pretty basic functionality, it doesn't have option to block other devices from connecting to your JBL FLIP 5. But if found that if you press on the party boost party button its blocking other devices from connecting to your JBL. I'm not sure if it works continuously also after rebooting JBL, but let me know if it works for you.
And in jbl charge 5 how to do it
Its should be oprittty much the same
Press on the Bluetooth and the play/pause buttons. The speaker will enter to the service mode. And from there continue with the steps as i show in the video.
I got my Flip 5 with lfm already on out of the box. 😬
yes some of JBL speakers comes with active LFM
what to do if my jbl flip 5 dont turn on i
This is a really good question, thank you for sharing your issue!
does your JBL is charged?
When you try to charge your JBL does the light of the battery is turned on?
i want to talk and listen to iPhone conversations. Is this possible?
Mi jbl flip 5 no me dejo reiniciarlo de fábrica pase casi 1 minuto entero presionando y nada ayuda!!!😢😢
@Fede Rouiller Lamento mucho escuchar que está experimentando problemas con su altavoz. Pero haremos todo lo posible para resolverlo.
¿Cuál es el modelo exacto de su altavoz JBL?
¿Cuál es el estado actual del altavoz? ¿Por qué desea restablecer el altavoz? ¿Tu JBL enciende normalmente? los botones responden bien?
@@LevinsReview el modelo de mi altavoz es un JBL Flip 5 todos los botones andan perfecto y la razón por la que quiero restablecerlo es que no me conecta a Bluetooth ni aparece en mi dispositivo la posibilidad de conectar
@@federouiller6555 Muy bien, parece que tu JBL no está en perfectas condiciones y el reinicio debería funcionar perfectamente. Quiero asegurarme de que está presionando el botón de reproducción y luego el botón de subir volumen al mismo tiempo. El botón está pensado, así que presiona los botones lo más fuerte que puedas hasta que el altavoz JBL se apague. Déjame saber como va.
@@LevinsReview ya lo intente nuevamente pero solo parpadea la luz que indica el porcentaje de batería
@@federouiller6555 esto está tan conectado, cuál es la versión del firmware JBL, tal vez la actualización resuelva el problema.
jbl fans knows that the jbls have lfm
wooooow how secret ..
thank you for the comment. I wish you the best of all ⭐
my blue tooth jbl speaker has m instead of the bluetooth symbol
Also I cannot get my flip 5 to enter the low frequency mode
Thank you for the question!
Did your press the Bluetooth button and the low volume button ? you should press the buttons continually for a few seconds until all the lights of JBL is turned off the then turned on once again?
Lfm is a mode made to see if there is any problems in the system. If you use it alot it will tear ur passive radiators up and rip them trust me ive lost a nice speaker due to lfm. Hope you dont make the same mistake as me.
@@dlowelmao2062 I figured it out. So what's your advice for using low frequency mode? Think ill be okay if I only use it on 50 percent volume and less?
@@LevinsReview thanks for the reply I got it to work
now the lfm doesnt work anymore bc of the update firmware
Omg.. that is sad....
@@LevinsReview false alarm bc i need the speaker max volume or 70 to 100 and flat equalizer will boost the bass up more so my jbl flip 5 keep dancing harder than normal and the bass can blow out my flip 5 at any moment lol:))
Una duda
I don't understand your question
Fix the one I don't understand
Manda el español este video xf
I’m sorry but it’s soooo
Hard to u understand what you are saying with the accent and fast speed you are talking . Soo I couldn’t get any clarity
I completely understand you, i decently speed with my talking when I'm super exited.
To solve this inconvenience you can go to settings of the video , choose payback speed and slow me down 😄
I hope it helps, i wish you the best of all 🌟 ❤
❤❤❤❤❤
@Christo Louis Violinist Thank you so much for response,
By the way, we have a lot more great content on the channel, So I recommend you subscribe to our channel.
I wish you a wonderful day 🌞
My jbl dont have light
Non of these work with my JBL Flip 5 😠
I hate JBL for not providing any useful Information on the functions of this speaker...
Where is the coments
Very dangerous for your jbl flip 5