Swapping our my interior lights for some LED lights. How to open the light covers and do the swap. Nicer and brighter interior than stock. Cheap upgrade.
I wanted to do something to jazz up the last couple of years I have left on my 2004 Navigator. So I followed your instructional video & installed rgb led remote controlled lights. Eazy-peazy!!! Thanks sir!!!
Thank you for this. I ended up breaking two of the light sockets anyway but at least your video showed me how to get in there. If I had tried it on my own it would’ve been much worse LOL
+HVABALL also I forgot to mention that that the middle lights you really don't need the tape. All you have to do is bend the metal prongs closer and it will fix snug.
Currently unavailable... but is listed on amazon. OPT7 16pc Interior LED Replacement Light Bulbs Package Set kit for 03-14 Ford Expedition | 6000K White | Dome Map Courtesy License Plate and More! www.amazon.com/dp/B00NB8U3JG/ref=cm_sw_r_cp_apa_i_1gYxEbV1687Z8
I wanted to do something to jazz up the last couple of years I have left on my 2004 Navigator. So I followed your instructional video & installed rgb led remote controlled lights. Eazy-peazy!!! Thanks sir!!!
I have the same idea with my 05 Explorer Eddie Bauer
I usually wire LED strips in parallel with the lights. It's awesome
Thank you, this info was useful for my Navigator. ;)
+dragon1979x which nav do you have? what year?
+Marvin St John 2006
Thank you very much. Great video
Thank you for this. I ended up breaking two of the light sockets anyway but at least your video showed me how to get in there. If I had tried it on my own it would’ve been much worse LOL
Those first bulbs replaced those lenses are very sensitive the little pins on either side of the lens break very easy what a pain in the ass LOL
This was a life saver. Thank you so very much.
Goooooooooooodd....
Thank you very much sir, very helpful.
if you leave them on ford designed that truck to cut the lights off long before you would kill the battery
Now my middle row lights turn on when I turn the other lights off and vice versa... so I removed my led and now the old bulbs are doing the same
Super helpful, thanks.
Did ok except there needed to be more light in the work area.
Thanks!
thx
Do you have a video for the puddle lights?
Puddle lights are the same
Rotate the mirrors forward to access the screw.
I have a 2006 ford expedition. What interior led light kits do you recommend that fit correctly?
Front two are 194, rear three are 578 (41mm).
Thanks a lot 👍
How to remove the council
We're did you order your lights from? I have a 2000 expedition.
Do you know if the led light dim when you close the door??
+peanut head Yes. They fade/dim when they go out after the door closes.
+HVABALL I just installed them today did you get to change your side view mirror lights??
+HVABALL also I forgot to mention that that the middle lights you really don't need the tape. All you have to do is bend the metal prongs closer and it will fix snug.
peanut head
@@peanuthead8287 Hey, good call. This works! I never understood the 2-side tape procedure.
Link to buy please for Lincoln Navigator 2002
Type in nagivatot 2002 led light kit on Amazon or Ebay. You're a big boy now you can do it.
Where did you buy the kit?
Currently unavailable... but is listed on amazon. OPT7 16pc Interior LED Replacement Light Bulbs Package Set kit for 03-14 Ford Expedition | 6000K White | Dome Map Courtesy License Plate and More! www.amazon.com/dp/B00NB8U3JG/ref=cm_sw_r_cp_apa_i_1gYxEbV1687Z8