Confused about Tire Offsets? We can help.
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- Adam goes over what tire offsets are and why you need to be aware of them before making a purchase.
***Adrenaline Cycles Swag!!
www.amazon.com...
***Adrenaline Cycles Website
www.adrenaline...
***Adrenaline Cycles Amazon Store
www.amazon.com...
Thet was quick and dirty. Got right to the point. Good job
Thanks for watching.
Wow. Great explanation, thanks.
Thanks for watching.
Great information to provide knowledge to those who do not know offset and how its figured. However , I think it may be a good idea for those changing offset , let’s say a 4:3 on a RZr xp what you are you doing to the geometry of the machine going to a 4:3 and how that 100% greatly hits the negative on wheel scrub, geometry of the machine. Added bump steer. added stress to the components.
People need to be educated on that when changing offsets and how that affects. The front end
Thanks for watching. Thats a great ideal. We might need to do an updated version of this video since a bunch of new wheels and machines have came out.
If the factory rim offset is 6+1 then wouldn’t a 4+3 offset be an extra 4 inches of width and not 6 ? Because you already had the +1 on each side and same for 5+2 ?
Thanks for watching. No the 4 inches in the inside inset. The 3 is the outside offset from the hub. The rim is 7 inches wide and 4 inches goes toward the inside and 3 inches toward the outside.
This was a great video guys! Our local guys around here had next to zero wheel and tire knowledge, I’ll likely be getting ahold of your guys for a custom set here in the near future.
Sounds Great just give us a call. 606-258-0005
Love your videos, thanks for making them. Can I ask, that you make more accessories videos for the Maverick XXC?
Thanks for watching. Yeah I will put it on our board. Thank for the tip.
Appreciate the simple explanation 👍 thank you
Thanks for watching
Awesome video. Thanks
Thanks for watching.
Is the offset measured from outside of the spoke wheel or the inside ??? I was told it's measured from inside! So your 6-1 is actually a 5-2.. ??.
Thanks for watching. Yeah it is measured from the inside. You have to be careful when purchasing wheel because some manufactures call it 5-2 and it can be a 4-3. Most times it is correct but we have seen some companies be a little off on their stated offsets.
I have a 2020 Rzr turbo S. Im building it towards racing for short track and wide forest trails. Over here in New Zealand we have to run beadlocks to race. The cost of a 4+3 is half of that of a 6+1 or 5+2. How terrible will it feel with 4+3's on ? will the cornering be that bad ?
Thanks for watching. You will be fine with the 4+3
How about a general 1000 2016
Thanks for watching. If I had a General I would run a 4-3 offset with a 15 inch rim. And tire size would depend on trail riding or work. If trail riding I would run a 32 inch tire. If work only I would get a 30 inch tire and be good.
Thank you!
Thanks for watching.
This is what I call, breaking it down "Barney Style". Great video. Automatic "Like", "Subscribe" and "Turn on Notifications".
Thanks for watching.
Quick question. A 15x7 wheel with an offset of +13mm equivalent to a 4+3?
That was the most to the point informative video I have watched. Exactly what I was looking for. I do have one question I am looking for opinions on. Does it make any sense to have a 5/2 offset on the front and 4/3 on the rear on a 64" 2022 DS. I want to of course increase stability, but mitigate degraded handling and increased wear to components. I figured having it wider in the back would help keep it from rolling. Plus my chocks on my trailer are already set up for a 68" wide KRX...which I am upgrading from. I already put a 64" DS I rented on it's side so I got that down...and trying not to repeat. Waiting on my DS to arrive in August 2022 hopefully. So looking for wheels soon!
Thanks for watching. If I had a DS X3 I would definitely go with the 4-3 offset to get it just a little wider than the 5-2. Only time we would recommend the 5-2 is really if the trailer size of the customers is an issue. Most all our wheel sales for a DS is the 4-3 offset. Beware when looking at wheels though some times they say 4-3 and when you get them they are really a 5-2. We have found that on some Raceline and Sedona wheels. Hope this helps.
@@AdrenalineCyclesKy TUVM!
if its a 64 inch machine with a 6+1 offset factory and i go to a 5+2 offset thats adding 1 inch to eachside wouldnt that make it 66 not 68?
Thanks for watching. I would say it would be 68 inches wide. Most wheel companies are not exact on what they call a 5-2 offset. I have a 5-2 offset wheel be more offset than another wheel companies 4-3 offset. So it your really concerned about width make sure to do your homework on wheel brand having the correct offset.
i have a 23 defender xt9 , its 62 model, id like to get to the 65 like the hd10 without changing suspension or even spacer if possible,im thinking the 5x2 offset would get me the 3-4 inches , not sure on front and rearwheels , id like to keep the tires tracking true all around, could you tell me which offset id need all around thank you
Thanks for watching. In the case to widen the machine out the offset wheels will do that. If I was doing it on a defender and wanted the rear to match the track of the front. We have put 5-2 offset on the front of the machine and put same style of wheel on back with offset of 4-3 to get the look right with out using spacers on the rear wheels.
Good evening I have a 2021 Honda talon 1000r I had superatv GDP portals installed my wheels are 7x15 5-2 offset and the tires are 35x10x15 when I mount them on ,the upper control arm is so close to the tire about 1/2 inch what could I do please help thanks
Thanks for watching. What brand wheel do you have that is a 5-2. You might need to go to another wheel with the same offset or switch it up to 4-3 offset. Wheel manufactures state numbers and it can say one thing and be another. We have seen it here first hand when we put a wheel on a machine that is reads a 4-3 but is in reality a 5-2 on the machine.
Great video! I gotta 2019 Talon 1000x 64” machine. Was thinking about going with 31”Maxxis Carnivores but have been having a hard time figuring out rims. What would you suggest? I wouldn’t mind going a little wider but not a lot.
Thanks for watching. I would get a 5-2 offset for that machine and roll with it.
Would you recommend 4+3 wheels on 32s for a maverick x3 64”? Or 5/2 on 32s?
Thanks for watching. I would go with the 4-3 offset on a 64 inch machine.
Thank you for the great information. What would you recommend on a Teryx4 se I was looking to do 30in tires
Thanks for watching. Yeah a 30 inch tire on a Teryx is a good size for it. If you ride lots of road. Look at a System3 XCR350 or a Sedona trail saw. If you stay off the road and in the trails. Get a Carnivore or Rip saw or a motoravage.
Good video..thanks explaining was 👌👍💯
Thanks for watching. We appreciate it.
What would you recommend for a 2023 Polaris ranger northstar, looking at doing 33x10” tires, I’d like it to have some stance to it, and not have the wheels and tires sucked in. Thanks!
Thanks for watching. On that model I would go with a 4-3 offset wheel in a 15 inch size and get a set of 33 carnivores. You will love that set up and how good they work.
Pro xp long travel.. 72” what would you recommend
Thanks for watching. I would go with a 6-1 offset. Like a KMC or a System 3 wheel.
What about the rims that say +13mm offset and 4.4 backspacing? Why can't everybody keep the same style measurements smh
Thanks for watching. Yeah the +13mm is like a 5-2 offset
Hi guys. I have a 2021 x3 turbo r 64”. Does a wider off set on rims from stock change suspension performance?
Thanks for watching. For most 95% of riders you will not notice the offset changing the suspension performance. The tires and air pressure change the suspension performance the most.
What tires for a 2019 can am maverik trail 1000
Thanks for watching. On a maverick trail 1000 I would run a Carnivor in a 28 inch or 30 if you can get away with it. Might try a radial tire if you ride a lot of payment. But if its 90% trails the Carnivor will do great.
Hey in the market for wheels and tires. 2022 CF Moto U 1000. 30x10x14 ITP Blackwater's is what I wanna run, what rims do you recommend?
Thanks for watching. I would go with a 4/3 offset. We have had good luck with Sedona or System 3 wheels. They are fairly priced and work great.
Help! my can am outlander 450 comes with a 4+3 offset 12”wheels on 25” tires. Would a 5+2 offset 14”wheels and 26”tires fit on it???
Thanks for watching. Yeah we have put Sedona wheels in the 5-2 offset on them before. It will work
Do they make a 20 inch rim in a 4.3 offset?
Thanks for watching. Yeah MSA wheel brand has some that will match the offset you are looking for.
What is a good set of rims for a Defender XMR I like to put on Maxxis Rampage tire on
Defender I would run a 5-2 offset with a 14" rim and beadlock for dure. You could also do a 4-3 offset. I like the Raceline or Sedona Beadlocks. Fairly priced and tough as all get out.
what would a plus 10 mm be considered
Thanks for watching. A plus 38mm is about 1 1/2 inch off the hub towards the outside of the machine. The 10mm I dont know what company has that wheel but we would assume it is zero offset. Flush with the lug nuts basically.
The MSA 12 Diesel 14x7 10 m
Awesome video I am in the market for wheels for my can am defender and I would like something wider then stoke would you say 5+2 or the 4+3?
Thanks for watching. I would go 4-3 offset on the Defender.
@@AdrenalineCyclesKy awesome thank you
Hi, so on my xrs 72 inch, if I put the 4+3 offset, will that put me at a total width of 76 inches since the stock rims are 6+1?
Thanks for watching. Yes that is what it should be. But some aftermarket wheels will state one size and be something completely different. Just be away of that.
@@AdrenalineCyclesKy thank you
I have a 2022 Defender Limited and would like to go up to a 28” tire on all 4 tires but not have to upgrade suspension or use spacers. Do you recommend 4+3 offset for all for wheels and what size tires would you suggest for all 4 tires?
Thanks for watching. We have put 30 inch tires on most all our Defender Limited models. We like to use a 4-3 offset and some time we will use a 5-2. But go 4-3 if you can get it. Keep in mind that you might have to adjust your shock settings, but it dont cost more money. We at the dealership always crank the shocks to the tallest setting just to make sure that larger tires can be put on the Defender Limited.
@@AdrenalineCyclesKy thanks for the reply. What size 28” would yo recommend fr all four tires? I know the width on front is 7” and rear is 11” on stock tires.
I have a Talon R. Do I need offset or can go without (straight)? I don’t know much about offset, although I know a lot more after watching your video.
Thanks for watching. I would go with a 5-2 offset wheel. Get you a little wider and give you more wheel options also.
Thanks for your amazingly fast response.
I am looking for a super wide offset for my 2021 can am x3 1+6 offset would you happen to have any?
Thanks for watching. No we don't have any wheels like that. You will have to get a 3 piece wheel so you can get that offset. We have not seen that offset on any wheels we sell.
What about a 2+5 offset?
New to watching i just purchased a 2022 maverick sport xmr gonna go with 30x10x14 tires what offset wheel would u choose
Thanks for watching. I would go with a 4-3 offset on that machine.
@@AdrenalineCyclesKy Thanks for the info and great videos.
What would you recommend for a 2021 Polaris rzr xp pro 64”? I want to buy new wheels.
On that model I would go with a 4-3 offset to get a little wider. Tires I would stick with a 32 inch.
@@AdrenalineCyclesKy would 33” tires be too much on the same type of machine mentioned above?
I have a 2020 x3 with 120hp
30x10x14 maxxis rampage think the 5.0x2.0 would be a good offset? So 68 overall
Yeah that would do well on that machine. Most X3 120hp leave with a 5-2 offset and some 30 or 32 inch tires. That set up your talking about will do great.
66" width ....as stock is 6+1 and 5+2 is plus 1" per side . Not 68" thats 4+3 (plus 2" per side )
@@HIinfidel you are correct. Also my 64” measureed 63” stock and also depends how much preload the shocks receive.