Too bad your website does not work. I tried to find the correct one for my new shotgun and the data is not available. Too bad because it looks like great product.
Sorry for the inconvenience, our website underwent maintenance and some data was lost in the process. We are working our hardest to reset all of the data to make it easier to find your correct recoil pad. This issue should be resolved soon. That being said, you can always use our template guide to find the correct recoil pad via our website navigation bar or use this link: cdn.shopify.com/s/files/1/1999/2905/files/Recoil_Pad_Template_Guide_-_WEB_07_2022.pdf You can also call our company at (360)-427-6031 from 7am to 3pm PST. or reach out via email to support@limbsaver.com and a staff member will be happy to assist you.
Hello Ken, As far as the model Marlin 336Y goes, it is not listed on our current "known" pad list, and without the dimensions of the butt of the stock, I won't be able to give you a good recommendation. However, just because it is not listed there, does not mean we don't have a pad for it. We offer a variety of sizes that work across most stocks!! The best way for you to find out which pad lines up with your specific stock would be for you to use our templates. Have you tried our templates? That will be the best way to find a fit or check to ensure one works with your specific gun. You just remove the current pad from your stock and place the stock on the templates to find the perfect fit. You can find our templates here: cdn.shopify.com/s/files/1/1999/2905/files/Recoil_Pad_Template_Guide_-_WEB_07_2020.pdf?v=1596473102 When you print our templates, you may need to check your printer settings and make sure your printer doesn't scale the size up or down. You can verify this by measuring a template and comparing it to the size listed on the template. If you are located within the US and would rather have an official copy of our recoil pad template guide, send us your address and we can get one sent out to you. If you can't find a template match, your next best option would be a Slip-On pad which you will get the same performance out of. Measure your bare buttstock, length, and width at its widest points and refer to these sizes: Small fits stocks measuring 4 1/2 x 1 1/2 inches up to 4 13/16 x 1 5/8 inches Small/Medium (this is a 1/2" thick pad) fits stocks measuring 4 5/8 x 1 9/16 inches up to 5 1/8 x 1 3/4 inches Medium fits stocks measuring 4 13/16 x 1 5/8 inches up to 5 1/8 x 1 3/4 inches Large fits stocks measuring 5 1/8 x 1 3/4 inches up to 5 3/8 x 1 7/8 inches Grind-to-Fit pads are also an option, but we recommend professional shops modify and install these pads. Here are the dimensions for our Grind-to-Fit Recoil Pads: Small 4 13/16” X 1 27/32” Grindable to: 3 7/8” X 1 11/32” Medium 5 3/32” X 1 13/16” Grindable to: 4 1/4” X 1 5/16” Large 5 9/16” X 2 1/16” Grindable to: 4 7/16” X 1 19/32” Sorry, I couldn't give you a more direct answer. I hope this information helps!
You should refer to our template guide!! That will be the best way to find a fit or check to ensure one works with your specific gun. You just remove the current pad from your stock and place the stock on the templates to find the perfect fit. You can find our templates here: cdn.shopify.com/s/files/1/1999/2905/files/Recoil_Pad_Template_Guide_-_WEB_07_2020.pdf?v=1596473102 When you print our templates, you may need to check your printer settings and make sure your printer doesn't scale the size up or down. You can verify this by measuring a template and comparing it to the size listed on the template. If you are located within the US and would rather have an official copy of our recoil pad template guide, send us your address and we can get one sent out to you.
Im assuming your talking about our Slip-On Recoil Pad. If that's the case, all you have to do to find the right size is measure your bare buttstock (length, and width at its widest points) and then refer to this Slip-On Recoil Pad size chart: Small fits stocks measuring 4 1/2 x 1 1/2 inches up to 4 13/16 x 1 5/8 inches Small/Medium (this is a 1/2" thick pad) fits stocks measuring 4 5/8 x 1 9/16 inches up to 5 1/8 x 1 3/4 inches Medium fits stocks measuring 4 13/16 x 1 5/8 inches up to 5 1/8 x 1 3/4 inches Large fits stocks measuring 5 1/8 x 1 3/4 inches up to 5 3/8 x 1 7/8 inches
Hello Steve, My sincerest apologies for your unsavory experience. Our customers including you, are our top priority. At LimbSaver, we strive to provide timely assistance to all our customers. However, due to the high volume of emails we receive, it sometimes takes a few business days for us to respond to your inquiry. We apologize for any inconvenience this may cause. We kindly request your understanding and assure you that your email will be given the attention it deserves. A common eccorance during email communication is issues due to a misspelled email addresses. To ensure that your emails reach us successfully, please double-check the email address you are using and make sure it's spelled correctly. Additionally, If you have any urgent matters or require immediate assistance, we encourage you to contact our customer support during our business hours of Monday - Friday from 7am - 3pm PST. at (360)-427-6031. Our representatives will be more than happy to assist you promptly. We value your business and are committed to providing you with the best possible service. If you have any further questions or concerns, please don't hesitate to contact us. Your feedback is essential in helping us enhance our customer experience.
Id like to find one for a Rossi 92 44 mag. It has a crescent butt stock. Anybody got any ideas?
Too bad your website does not work. I tried to find the correct one for my new shotgun and the data is not available. Too bad because it looks like great product.
Sorry for the inconvenience, our website underwent maintenance and some data was lost in the process. We are working our hardest to reset all of the data to make it easier to find your correct recoil pad. This issue should be resolved soon. That being said, you can always use our template guide to find the correct recoil pad via our website navigation bar or use this link: cdn.shopify.com/s/files/1/1999/2905/files/Recoil_Pad_Template_Guide_-_WEB_07_2022.pdf
You can also call our company at (360)-427-6031 from 7am to 3pm PST. or reach out via email to support@limbsaver.com and a staff member will be happy to assist you.
Which one fits the ksg
Do you carry any slip ons for the baretta a300 ultima patrol?
also A300 here
Looking for a recoil pad for Marlin 336Y, suggestions? The dimensions are different from the regular 336
Hello Ken,
As far as the model Marlin 336Y goes, it is not listed on our current "known" pad list, and without the dimensions of the butt of the stock, I won't be able to give you a good recommendation. However, just because it is not listed there, does not mean we don't have a pad for it. We offer a variety of sizes that work across most stocks!! The best way for you to find out which pad lines up with your specific stock would be for you to use our templates.
Have you tried our templates? That will be the best way to find a fit or check to ensure one works with your specific gun. You just remove the current pad from your stock and place the stock on the templates to find the perfect fit.
You can find our templates here: cdn.shopify.com/s/files/1/1999/2905/files/Recoil_Pad_Template_Guide_-_WEB_07_2020.pdf?v=1596473102
When you print our templates, you may need to check your printer settings and make sure your printer doesn't scale the size up or down. You can verify this by measuring a template and comparing it to the size listed on the template.
If you are located within the US and would rather have an official copy of our recoil pad template guide, send us your address and we can get one sent out to you.
If you can't find a template match, your next best option would be a Slip-On pad which you will get the same performance out of. Measure your bare buttstock, length, and width at its widest points and refer to these sizes:
Small fits stocks measuring 4 1/2 x 1 1/2 inches up to 4 13/16 x 1 5/8 inches
Small/Medium (this is a 1/2" thick pad) fits stocks measuring 4 5/8 x 1 9/16 inches up to 5 1/8 x 1 3/4 inches
Medium fits stocks measuring 4 13/16 x 1 5/8 inches up to 5 1/8 x 1 3/4 inches
Large fits stocks measuring 5 1/8 x 1 3/4 inches up to 5 3/8 x 1 7/8 inches
Grind-to-Fit pads are also an option, but we recommend professional shops modify and install these pads.
Here are the dimensions for our Grind-to-Fit Recoil Pads:
Small 4 13/16” X 1 27/32” Grindable to: 3 7/8” X 1 11/32”
Medium 5 3/32” X 1 13/16” Grindable to: 4 1/4” X 1 5/16”
Large 5 9/16” X 2 1/16” Grindable to: 4 7/16” X 1 19/32”
Sorry, I couldn't give you a more direct answer. I hope this information helps!
How do you know what size to get
You should refer to our template guide!! That will be the best way to find a fit or check to ensure one works with your specific gun. You just remove the current pad from your stock and place the stock on the templates to find the perfect fit. You can find our templates here: cdn.shopify.com/s/files/1/1999/2905/files/Recoil_Pad_Template_Guide_-_WEB_07_2020.pdf?v=1596473102
When you print our templates, you may need to check your printer settings and make sure your printer doesn't scale the size up or down. You can verify this by measuring a template and comparing it to the size listed on the template.
If you are located within the US and would rather have an official copy of our recoil pad template guide, send us your address and we can get one sent out to you.
What size for a Maverick 88 12G? Size small?
Im assuming your talking about our Slip-On Recoil Pad. If that's the case, all you have to do to find the right size is measure your bare buttstock (length, and width at its widest points) and then refer to this Slip-On Recoil Pad size chart:
Small fits stocks measuring 4 1/2 x 1 1/2 inches up to 4 13/16 x 1 5/8 inches
Small/Medium (this is a 1/2" thick pad) fits stocks measuring 4 5/8 x 1 9/16 inches up to 5 1/8 x 1 3/4 inches
Medium fits stocks measuring 4 13/16 x 1 5/8 inches up to 5 1/8 x 1 3/4 inches
Large fits stocks measuring 5 1/8 x 1 3/4 inches up to 5 3/8 x 1 7/8 inches
Got one for my 12 ga, i’ll report back on how it changes the felt recoil tommorow.
Please do
@@imnobodybye236 as my honest opinion, without the pad isn’t all that bad. But it helps with my longer arms, and does cushion the recoil fairly.
@@Wes0602 thank you
@@imnobodybye236 np
Thanks for the honest review!!!@@Wes0602
Limthaver
Translator says that means glue holder😂
these guys don't answer comments or even take questions from their customer support email. thumbs down on customer service.
Hello Steve,
My sincerest apologies for your unsavory experience. Our customers including you, are our top priority. At LimbSaver, we strive to provide timely assistance to all our customers. However, due to the high volume of emails we receive, it sometimes takes a few business days for us to respond to your inquiry. We apologize for any inconvenience this may cause. We kindly request your understanding and assure you that your email will be given the attention it deserves.
A common eccorance during email communication is issues due to a misspelled email addresses. To ensure that your emails reach us successfully, please double-check the email address you are using and make sure it's spelled correctly. Additionally, If you have any urgent matters or require immediate assistance, we encourage you to contact our customer support during our business hours of Monday - Friday from 7am - 3pm PST. at (360)-427-6031. Our representatives will be more than happy to assist you promptly.
We value your business and are committed to providing you with the best possible service. If you have any further questions or concerns, please don't hesitate to contact us. Your feedback is essential in helping us enhance our customer experience.
Hey Steve check this out they answer it so now it’s your turn what question you got buddy 😅