Asslam o alikum I have an Ammerican Fitness tread mill with inclination & display as well ....power turns on ; relay clicks but nothing happens while display is on no motor works upon pressing buttons....should i check relay or console.? Console seems good nothing is burnt & doesnt display any sort of error as well untill i plug out some cables of the board ???
Good video. I have another strange phenomenon in my treadmill. When I remove the speed sensor, there is no difference, so no error code shows at all. I checked the sensor and measured it, it works, do you have any idea what it can be due to?
@@KalimullahPakistan Ok. But i can not enter the speed meny to adjust the speed. I can change the speed with the little rheostat on the board. is there a special meny for that?
how much would you charge if someone’s willing to get it fixed by you? Cause I’ve genuinely got no idea where to get mine fixed from and I’ve tired repeatedly but can’t fix it myself.
Great job! Can you pl let me know the reason you have added a wire instead of fuse? what is the rated fuse, my card is also blowing the fuse when i start the motor. pl advice.
Sorry to be so offtopic but does anybody know a tool to log back into an Instagram account? I was dumb forgot the account password. I appreciate any tricks you can offer me!
@Dash Theo Thanks for your reply. I found the site thru google and im trying it out now. Takes a while so I will reply here later when my account password hopefully is recovered.
assalamualaikum bro i have board without speed sensor feature. the mosfet u1660G was have short circuit to its heatsink previously. now the treadmill is stop after 1 second running and then error 05 displayed. this happen every time i try to restart the treadmill. could you help me how to solve the problem?
@@KalimullahPakistan you are right that button doesn't work. But incline up down also doesn't work. And when machine enters double dash flashing it won't start. Where are you located? How can contact you?
Very nice video. I have a question ? I have this same board but it has a CC16M V3 chip were the RFP460 is on your board. Can I replace the CC16M V3 chip with a RFP460 chip ? Thank you for any help.
@@KalimullahPakistan Thank you for the fast response. Date sheet was the first thing I looked for. They have them for the UFF100-005 and 6 but I was unable to locate one for the UFF100-04.
Assalam u Alaykum
i have american fitness machine showing 7 fault what could be the reason
+923009855546 what'sapp short video
ok sir thank you@@KalimullahPakistan
Hi, can you tell me what chip # you have in U2. Thank you....
Asslam o alikum I have an Ammerican Fitness tread mill with inclination & display as well ....power turns on ; relay clicks but nothing happens while display is on no motor works upon pressing buttons....should i check relay or console.? Console seems good nothing is burnt & doesnt display any sort of error as well untill i plug out some cables of the board ???
Good video. I have another strange phenomenon in my treadmill. When I remove the speed sensor, there is no difference, so no error code shows at all. I checked the sensor and measured it, it works, do you have any idea what it can be due to?
Your treadmill is without sensor. Sensor is installed only to measure speed not for feedback as tripping
@@KalimullahPakistan
Ok. But i can not enter the speed meny to adjust the speed.
I can change the speed with the little rheostat on the board.
is there a special meny for that?
how much would you charge if someone’s willing to get it fixed by you? Cause I’ve genuinely got no idea where to get mine fixed from and I’ve tired repeatedly but can’t fix it myself.
It depends upon problem. Contact me at whatsapp
03009855546
My friend Are you from Doha right?
No Pakistan
thanks very good a question i can replace IGBT transistor whith mosfet transiston in treadmill ?
Yes
@@KalimullahPakistan thanks ,it is opperational ?
What can be the reason by 60 amp transistor gets short after certain use ?
Biasing of mosfet
Great job! Can you pl let me know the reason you have added a wire instead of fuse? what is the rated fuse, my card is also blowing the fuse when i start the motor. pl advice.
Sorry to be so offtopic but does anybody know a tool to log back into an Instagram account?
I was dumb forgot the account password. I appreciate any tricks you can offer me!
@Rocky Nasir Instablaster =)
@Dash Theo Thanks for your reply. I found the site thru google and im trying it out now.
Takes a while so I will reply here later when my account password hopefully is recovered.
@Dash Theo It worked and I actually got access to my account again. I'm so happy:D
Thank you so much you saved my ass !
@Rocky Nasir No problem :)
Hi sir, I have the same error 7 on a treadmill monark t601. Please, can you explain me a little bit how can I fix it?
Send a short video
Mau mencari PCB Taedmil merk SHAGA tolong kemana?
assalamualaikum bro
i have board without speed sensor feature. the mosfet u1660G was have short circuit to its heatsink previously. now the treadmill is stop after 1 second running and then error 05 displayed. this happen every time i try to restart the treadmill. could you help me how to solve the problem?
Excelent sir
I have incline error 7. Previously incline function and fold/unfold wasn't working as well but machine was running. However its now stuck on E7
I think Machine name is sports art
@@KalimullahPakistanmodel nar-5080. this error is intermittent. Sometimes double dash flashes on incline display and machine doesn't start
@@ayereh most probably button at the back of the console is faulty.
@@KalimullahPakistan you are right that button doesn't work. But incline up down also doesn't work. And when machine enters double dash flashing it won't start. Where are you located? How can contact you?
It will help to people
Too many videos are available for components checking
Thanks sir
Error 04 please
Freemotion treadmill hai on hota hai lekin belt move nahi hota
My motor is wrking...but display is not respons.....plss answer me..plssss
Check combination cable ...power cable ...
@@apramod143 tnkoo
Bhai aapko location Kha ki hai
Bharaku
Aapka contact number
Pakistan mai aap kah hutey hai
Islamabad
Aapka number
Call pe bat Karni thi
Sar mujhe apna number do PCB repair honi hai
Hello sir pcb repair hobe
Phone number
Bro at least explain how to check the components
Yes I agree but video looks incomplete
Hi
Error 2a2
Im your subscriber I have problem with treadmill can I watsapp u pix ??
Yes +923009855546
Whatapp no
Very nice video. I have a question ? I have this same board but it has a CC16M V3 chip were the RFP460 is on your board. Can I replace the CC16M V3 chip with a RFP460 chip ? Thank you for any help.
Check the datasheet of both compare pinout and other stuff.
Remember,in same shape diode is also there. Do mix it with that. Check datasheet
@@KalimullahPakistan Thank you for the fast response. Date sheet was the first thing I looked for. They have them for the UFF100-005 and 6 but I was unable to locate one for the UFF100-04.
@@carlkellogg5342 check the difference of 6 and 5 the difference will help you to conclude information for 4
Or send datasheet to me
@@KalimullahPakistan Thank you. How do I get the date sheet to you ?
@@carlkellogg5342 03009855546
App ko 1 curct dekana he app apna what app no dedo
03009855546
Number do