Thank you so much. I got this problem and thought how can I get a technician during this lockdown. I saw your video and thought let's give it a try and it worked fine. Once again thank you for this.
While cleaning today the same E3 problem was displaying and I could understand that the issue is with sensor but setting I came to know from your video and got success in fixing the issue. Thanks a lot.
Thank you for posting this! What would you suggest if it appears the speed sensor is imbedded in the motor? I am working on an UMAY treadmill so it is a bit smaller than a standard treadmill
Hello Aatik! Firstly thank you soooo much for this video you really have saved us alot of money and helped us alot!!! This is a very clear and simple explanation for non technology handy people to follow thats why my mom is really exited that it now works cos she followed your steps! Anyone who reads this comment and wants to know if it works take my word for it....IT DOES!!!!😁🙏👍
Thanks, Aatik. The problem with ours is it was making a ticking noise, because the wheel was not centered between the sensor nodes but rubbing on one side. Once remounted and centered, the noise went away as did the E3 error. Cheers!
Hi Mr Aatik , i hope you are fine and I would like to thank you for your initiative to help people to repair their machines, I Have had a Sportop MT600 treadmill for 15 years, and this is the first time I face a problem consisting on a similar error 3, so I bought a new speed sensor cable from Aliexpress and I replace the old one by the new bought, but the problem still the same, i only doubt that I am not centered the disk of the motor in the " U", can you advise me what to do! and I will be thankful in advance for your help
Great video--very comprehensive! Haven't tried it yet, but I have faith your advice will work. Thank you! And so far, so good! I'm one happy lady and a new subscriber!
Hi Aatik. Nice video thanks. Cheeky request - my tunturi j3f power board is flicking from 0.7v to 1.7v to the motor supply pins when the start relay triggers. 1.7v won't drive the motor though. Any idea which component might be causing the problem? I replaced the IGBT not sure what to try next.
I cleaned my speed sensor, dusted it dried it etc like you instructed and it didn’t work still. So I bought a replacement and just changed it and it’s still doing the same thing. Would you happen to know what is the next thing I can try to fix the treadmill if it’s not the speed sensor in itself what’s not working? Do I have to replace the motherboard?
Hi, I don’t get an E3 message but the Horizon Fitness t930 turns on with its 3 beeps and then the various displays just have dashes and won’t start! I’ve turned it on and off etc but nothing! Can you help?
Thank you, your video was easy to follow and although there was no oil. The sensor was off the bus. After pushing it back on, everything so far so good.
Thank u so much for that great video 😍😍 I had my treadmill for a longe time and it was my 1st time to lubricate it and i had that issue and i watched like 15 videos trying to know how to fix it 🤦🏻♂️🤦🏻♂️🤦🏻♂️ finally i watched this video and i did it 💪🏻😃 Thanks again
Hello.. I have a question please.. The treadmill increase speed to full speed when i just start walking over it... And its not go to off unless pull the magnatic from it.. Whats the error.. And how can i repair it ?? Thanks..
My Horizon CT5.2 was getting E1 error after running 5 - 15 minutes. Found out that it was speed sensor that was not aligned to the magnet properly. Aligned it and fixed the E1 issue on it.
Hi... Thanks very much for your videos.. My tapis roulant technogym run race HC 1200 tell me the same E3 error " Belt movement stopped" ( indicated also in the inverter display) In fact, when I press start the belt does not move, i.e. it does not move as it does in your case, then it stops and gives an error ... nothing my belt don't move... Can you help me? Thanks
I owns a Johnson fitness T1450 treadmill ,and when ever am on it,and tries to elevate it,it would shows E4,and the machine would stop working.what causes that?
Thank you for your video. It is very informative. Do you know how to fix a 425 error code? I have tested the motor and replaced the fuse, but it is still showing the error code. It is on Pacemaster Pro VR. Thanks!
cool! So its literally using the same technology found in old ball computer mice and arcade trackballs. I know now because I once took apart a noisy trackball from a game and saw the same setup. Thanks man for teaching me something new I am subbing! I didnt even need to fix my machine I was just bored and watching treadmill maintenence videos
I had the same problem. I tried everything checked motor. Belt and everything. Clean sensor and disk still no enjoy. Might it's needs rest from panel but not quite sure how.
Hi , I am also getting the E3 error but in my case the disc is also shaking and getting touched with both side sensors and making noise. Can u please help me out...
hi thanks for this! very interesting! I have a standup desk treadmill that is a bit different than yours. and the sensor is not visible. can I send you a pic some way¿
Thanks for the video and able to solve error 03 , however after that I am getting error 08 and I am not sure why it is showing error 08 , but able to use treadmill
The display screen of my machine is not working but machine produce the sound when i press the button and thee track of trademill is also not moving what is the error in my machine and what can i do to fix it Company : slimline
Hi pal I got Reebok I run 3.0 with E3 error code coming up I saw your video and open sensor clean , dry , then middle the motor but still e3 error code coming up any idea what to do know thanks
E3 seems to be a general error code. I’ve also read in other sources that your treadmill band (the underside of the part where you run on) needs oiling. I already oiled the treadmill but I still get E3 so my problem could be the sensor. :/
Aatik you should be proud that you made so many people happy. Thank you.
Thank you. I managed to fix my tread mill due to your video. It saved me from having to wait for them to come and fix it. It saved me money too.
I watched over 20 videos and yours was the only one to give the correct and easy solution, Thank you so much
You my friend deserve a medal. Followed your video and fixed the treadmill. Owe you a cold beverage
Do you have any idea where I should start if getting E03 error but changing the sensor hasnt fixed it? Thank you.
Thank you so much. I got this problem and thought how can I get a technician during this lockdown. I saw your video and thought let's give it a try and it worked fine. Once again thank you for this.
Excellent demonstration. Repaired my treadmill, thanks to you!
Thanks very much Aatik, followed your very simple instructions now my Reebok treadmill is working again, thanks to you, you are a star
Excellent, i dont have a treadmill but i like your explanation, well done! 😀
Thanks, repaired the wife’s treadmill through this video 😊
While cleaning today the same E3 problem was displaying and I could understand that the issue is with sensor but setting I came to know from your video and got success in fixing the issue.
Thanks a lot.
Thank you for posting this! What would you suggest if it appears the speed sensor is imbedded in the motor? I am working on an UMAY treadmill so it is a bit smaller than a standard treadmill
Hello Aatik! Firstly thank you soooo much for this video you really have saved us alot of money and helped us alot!!! This is a very clear and simple explanation for non technology handy people to follow thats why my mom is really exited that it now works cos she followed your steps! Anyone who reads this comment and wants to know if it works take my word for it....IT DOES!!!!😁🙏👍
it really works yeah thanks a lot my dad is so happy now
Thank you so much sir👍 you saved us some money. Just repaired ours🥰👍
Hi Aarik,
I've got a similar machine.
It's display is fully dead. Could you please advise me?
Thanks
Thanks, Aatik. The problem with ours is it was making a ticking noise, because the wheel was not centered between the sensor nodes but rubbing on one side. Once remounted and centered, the noise went away as did the E3 error. Cheers!
Hi Mr Aatik , i hope you are fine and I would like to thank you for your initiative to help people to repair their machines, I Have had a Sportop MT600 treadmill for 15 years, and this is the first time I face a problem consisting on a similar error 3, so I bought a new speed sensor cable from Aliexpress and I replace the old one by the new bought, but the problem still the same, i only doubt that I am not centered the disk of the motor in the " U", can you advise me what to do! and I will be thankful in advance for your help
You are intelligent engenear, you helped me alot today... 谢谢
Great video--very comprehensive! Haven't tried it yet, but I have faith your advice will work. Thank you! And so far, so good! I'm one happy lady and a new subscriber!
Thank you so much. Mine had a bit of fluff stuck in between & now it’s cleared treadmill is working fine. 👍👍👍
Thanks for the video, fixed the problem and treadmill running perfectly again. Cheers
Thanks. I need help to fix E3 for my Proteus 6560. Whom should I contact in Auckland NZ.
Remember buying in a store in Green lane 12 Years ago.
Terimakasih sudah berbagi ilmunya,,saya jadi tau caranya,,sukses terus,,Aatik👍
Hi Aatik. Nice video thanks. Cheeky request - my tunturi j3f power board is flicking from 0.7v to 1.7v to the motor supply pins when the start relay triggers. 1.7v won't drive the motor though. Any idea which component might be causing the problem? I replaced the IGBT not sure what to try next.
Fixed my treadmill! Thank you 🤩
Thank you. I fixed my treadmill.
Does this also work on a Bowflex for any other treadmill
I cleaned my speed sensor, dusted it dried it etc like you instructed and it didn’t work still. So I bought a replacement and just changed it and it’s still doing the same thing. Would you happen to know what is the next thing I can try to fix the treadmill if it’s not the speed sensor in itself what’s not working? Do I have to replace the motherboard?
I'm having same Error E3 in my domyos eliptic bike. Decathol don't give any support to fix it...could be same issue?? Thanks in advance.
Thank you so much i got the same problem with this error3..thnks for video presentation of this error3 troubleshooting.
thankyou,sorted my issue with the optical switch
Dear which application u r using for animation. Please.
Hello hope you can help my treadmill is showing E1 after running for less than second
Very useful repair video
Hi, I don’t get an E3 message but the Horizon Fitness t930 turns on with its 3 beeps and then the various displays just have dashes and won’t start! I’ve turned it on and off etc but nothing! Can you help?
Thank you, your video was easy to follow and although there was no oil. The sensor was off the bus. After pushing it back on, everything so far so good.
Great job!
Thanks. It worked 😁
Thank u so much for that great video 😍😍
I had my treadmill for a longe time and it was my 1st time to lubricate it and i had that issue and i watched like 15 videos trying to know how to fix it 🤦🏻♂️🤦🏻♂️🤦🏻♂️
finally i watched this video and i did it 💪🏻😃
Thanks again
Glad it helped!
Using treadmill on the 2nd miles my breaker trips, any suggestions?
Hello..
I have a question please..
The treadmill increase speed to full speed when i just start walking over it...
And its not go to off unless pull the magnatic from it..
Whats the error.. And how can i repair it ??
Thanks..
Thank you so much for the video! You've saved us in this quarantine times! 😆
True
Thank u very much the engineer ask for £250 but i fix because of u by free thank you again
My Horizon CT5.2 was getting E1 error after running 5 - 15 minutes. Found out that it was speed sensor that was not aligned to the magnet properly. Aligned it and fixed the E1 issue on it.
Absolutely excellent explanation and demonstration!!!! Thank you sooo much. Off to fix my treadmill now. Cheers. 👋👋👋👌
hi , awesome video. please make a video on error 1. after 7 seconds I get a E1 error and it switches off. thank you
Hi... Thanks very much for your videos.. My tapis roulant technogym run race HC 1200 tell me the same E3 error " Belt movement stopped" ( indicated also in the inverter display) In fact, when I press start the belt does not move, i.e. it does not move as it does in your case, then it stops and gives an error ... nothing my belt don't move... Can you help me? Thanks
Sir i have fitking w375 model. I could not find the sensor. Can u help me
Thanks a lot it's easier that you describe .
I owns a Johnson fitness T1450 treadmill ,and when ever am on it,and tries to elevate it,it would shows E4,and the machine would stop working.what causes that?
Fixed it! Thank you very much for this helpful video!👍🏻
Good evening. I have a domyos t500b treadmill and it is displaying the message: Service.
Do you know How to fix it?
opened my treadmill and the sensor is missing ! any advise? idk how its been working for years !
Boa noite tudo bem eu tenho uma máquina igual tem problema de senso que controla a velocidade está danificando como resolver
Thank you for your video. It is very informative. Do you know how to fix a 425 error code? I have tested the motor and replaced the fuse, but it is still showing the error code. It is on Pacemaster Pro VR. Thanks!
What should i do with mine that displaying E1 sir?.mosfet,7815,7805,diode they all good when im using multitester
cool!
So its literally using the same technology found in old ball computer mice and arcade trackballs.
I know now because I once took apart a noisy trackball from a game and saw the same setup.
Thanks man for teaching me something new I am subbing!
I didnt even need to fix my machine I was just bored and watching treadmill maintenence videos
I had the same problem.
I tried everything checked motor.
Belt and everything.
Clean sensor and disk still no enjoy.
Might it's needs rest from panel but not quite sure how.
Hi , I am also getting the E3 error but in my case the disc is also shaking and getting touched with both side sensors and making noise. Can u please help me out...
It helped me a lot to fix the error 03
What type of treadmill is it on this video
Thanks man, You've saved my life :)
sir, where we can buy the optic disc for treadmill? thanks.
Hello! Sir I have js 16401 home treadmill witch his loss the key and also give E3 option show on screen what I do for that plz need u r Advice. Thanks
Hello, I have a sports apparatus, the Aero brand has appeared. What is the solution to this problem?
hi sir i have a treadmill with the writing on the lcd display CHECK MOTOR..what is the problem ..?
Thank you so much very easy to understand your explanation grate job ....
Nice helpful video.very specific,very clear explanation.very short but precise.more power to you sir
Hi I want to know how to run the treadmill without sensor
Hello, have try to do the same, it’s didn’t work, what’s else should I do?
Thanks already, I have fixed the device thanks to you
Great!
Very helpful.thank you
Thank you so much this video really helped me because i thought it was the treadmills card. Thank you again
Do you know what will fix an EO4 error? My treadmill counts down to start and gets to zero then cuts out... It won't even start the belt?
Extremely useful video..u r a saviour
I found very useful thanks 👍
Hi i have one that give me e03 but the mat not move for 5 sec please advise
worked fine on sunny health and fitness sf-t7514 heavy duty treadmill. thanks
hi thanks for this! very interesting! I have a standup desk treadmill that is a bit different than yours. and the sensor is not visible. can I send you a pic some way¿
Very useful to me now I am going to fix the problem 🙂
Thanku so much
JazakAllah
It helped me out
❤️❤️Kindpy post video of how to rem0ve switch power and replace wires
Thank You very much!😊
Thanks for the video and able to solve error 03 , however after that I am getting error 08 and I am not sure why it is showing error 08 , but able to use treadmill
Cleaned t sensor it worked for 1 week same thing happened again what could it be please
Дякую, допомогло!
The display screen of my machine is not working but machine produce the sound when i press the button and thee track of trademill is also not moving what is the error in my machine and what can i do to fix it
Company : slimline
Helped me a lot!!! Thanks!
Thank you very much, I fixed it following your advices.
My tredmill shows E00 on the screen.. Any idea? Just installed
What if is it is not covered with oil
Gracias amigo desde chile👌👍
Ok nice explanation. I will try
Hi pal I got Reebok I run 3.0 with E3 error code coming up I saw your video and open sensor clean , dry , then middle the motor but still e3 error code coming up any idea what to do know thanks
E3 seems to be a general error code. I’ve also read in other sources that your treadmill band (the underside of the part where you run on) needs oiling. I already oiled the treadmill but I still get E3 so my problem could be the sensor. :/
I got an error E5 in my reebook ZR8!!! any idea plz?
I have Horizon treadmill and showing error connect on display please suggest the solution
Thanks for your help
Thank you so much. It fixed. great.
Sir my trademill have power but no display and not working
What does this mean pls ..
Error 08 .. 240C02 wrong
Can you help me
About the error of blocked contect support error
Technogym treadmill machine
Thx, very helpfull 🙏