I’ve watched countless detailers and car paint correctors on TH-cam but I have to say your work for the time given and budget is absolutely phenomenal and I’ve sat watching loads of your videos since finding the channel last week. Thanks for taking the time to upload them all.
A few things I've gathered from watching your channel, which I really enjoy. 1) You're work is tremendous 2) You don't get paid enough 3) Some people are utter slobs 4) Car interiors are better made than I'd have ever thought when you see what they can be brought back from. Cheers for the videos.
What a transformation! Well done! I'm a car clean nut but I get easily bored with most channels. This is my favourite by far and will keep watching. Thanks for sharing.😃👍🏻
Don't stop making these! I think your channel will blow up - your content is the most genuine, always at least a little different given the different vehicles you do, and so well made. You're literally the only channel I hit the bell icon for and like each video. Commenting now to try get the algorithm in your favour :P
Thanks for the support and feedback 😁👍 I also hope the Channel grows quite quickly, have already filmed the next two cars which are a little longer but still fast paced and informative
lovely work. Where you’ve lost some badge letters, specifically the “ch” from Dispatch, I think it’s best to debadge the van. My technique is to: 1. Use a hairdryer to soften the adhesive 2. Use some dental floss to cut through he adhesive pads 3. Isopropyl alcohol and a microfiber cloth on adhesive residue 4. Machine polish the paint
Such a nice project again Don't worry some shorter videos aren't bad as long as they are educational and entertaining like this one. Nice work have a nice weekend
Thank you for the video. Lovely turnaround there, especially on the interior as it was thoroughly disgusting beforehand. Looking forward to the next video 👍.
Depends on clients requirements, most want the leading edge, bit above the windscreen or “peak” on the bigger van , basically what you can see from standing on the ground! Very few want to pay for the entire roof as it’s hard to do and very time consuming for something you don’t see on a daily basis! Smaller vans like combos/berlingo’s have the entire roof done.
Hello,well that needed a a clean and detail,it was a bit dirty from the water,but the time spent it was well worth it.the wheel trims shines the van more than having hubcaps.
As always a great video, got to admit to being some what worried about engine and engine bay cleaning, speaking to an auto electrition friend, he says that almost a third of his work comes from wet looms, definately enouugh to shatter my confidence.
Ditto. I just daren’t put my power washer into the engine bay. I just spray APC on to an old brush on to the bits I can reach, work it in, then wipe it down with a cloth. I need my car for work & just can’t afford the risk of doing something to it for sake of a clean looking engine especially due to its age & mileage. The bonnet is only lifted by me for topping up fluids & the garage for annual servicing. If it was a show car, then that’s a different thing.
Looking forward to the VW Beetle. Pretty sure the whole body on them was galvanised so they don’t rust. They will be a classic one day, I am sure of it…
Great work -- and don't worry that this video was shorter than normal! Frankly, I'd rather have a 20 minute video than a longer one, unless, of course, the project really needs the longer length!
Always amazing how people never look after their trusted work vehicle , I cleaned these and worse for 20 years for a retail site would take that ply out pressure wash it paint any scratches outside and in then refit ply in 2 days
Hey... Try iron remover from Braindead dateiling, made in UK, so you get it in a few days... Only of its kinf that actually smells nice, and it is most likely the best product on the Old contynent... Risk it, you will be more then happy! Put out longer videos, if you can... I watched all of your videos last few days... Greeting from Croatia!
@@everydaydetailing6449 take a look, Jason did all he could that his products can be high end, and that smell was a thing he was wery proud he made actually wery nice... Well, i watch only the best... Cant wait dor that longer video... Greeting!!!
Perfect as always! Cannot wait for the bug it looks like its going to be a good one! Hows the rupes uno ? Does it powder up or is it easy to buff off by hand ?
Great great work! Can i clean my engine bay on a Renault Megane 3 without water and only APC and citrus degreaser ? and use and airline to dry ? This generation Of Megane is really sensitive on engine bay cleans!
Love this videos! Big detailing nerd, question - on the RM van and this van, the rear badges are missing letters / look terrible - why didn’t you remove them and remove the residue?
Thanks for pointing it out 👍 will remember next time whilst doing narration , some times common slang/terminology for cigarettes/and cigarette ash 🚬 in the uk may not translate the same way in different countries! Just like a “sod” of grass is quite normal state side, over hear not so much 😂
Really depends how much rust is on the wheels , and how much the customer wants to pay! Agreed if it’s for your self and you have the time it maybe a better option, to restore the originals
Hi! Long time subscriber, I noticed that you use a flex forced rotation machine for more than a year. I watched almost all of the TH-cam reviews on this machine. Almost everyone says it's a very smooth machine, but the battery tends to go very weak after about 10-15 minutes. It holds for 30-40 minutes, but not at full speed. Are the 2 batteries that came in the kit able to cicle themselvs between charging and working or do you need to take brakes? Also about the vibrations I saw you attached a foam pad on the battery (I suppose it's for vibration purposes)...so...is it that bad? In the beginnings I saw you used to use a rupes mille, vibration wise how do they compare? Please give us a review on the flex. It's a pretty costly kit and a big investment. You cannot trust 100% the reviewers on internet. I would prefer the opinion of a working man. Just purchased the little one (3" flex) and it's a superb made machine but a bit shaky and I do feel a battery drop when near 2 bars of "fuel". Thank you!
Battery’s last 30+ mins on 4/6 I have a 3rd extra one just in case but rarely use it. In the real world stoping for a break etc you never really run low on power! Mille was easier to grip as it’s a normal handle.. the flex is heavy on the back end due to the battery. And you tend to hold on to the base of that rather than the handle grip! All DA’s vibrate, I added the pad to the base to make it more comfortable when using over long periods. It’s a good toll and once you have been cordless, it’s very hard to return to a cable powered machine 👍 thanks for the continued support of the channel.
I’ve watched countless detailers and car paint correctors on TH-cam but I have to say your work for the time given and budget is absolutely phenomenal and I’ve sat watching loads of your videos since finding the channel last week. Thanks for taking the time to upload them all.
I appreciate that! its great to get genuine feedback 👍
How much do it cost????
A few things I've gathered from watching your channel, which I really enjoy.
1) You're work is tremendous
2) You don't get paid enough
3) Some people are utter slobs
4) Car interiors are better made than I'd have ever thought when you see what they can be brought back from.
Cheers for the videos.
Thanks Steven for the support and feedback 👍
I needed this video to escape from my day job in a hospital… thank you for keeping me sane! 🙏🏻
Your welcome Johannes, thanks for the continued support 👍
What a transformation! Well done! I'm a car clean nut but I get easily bored with most channels. This is my favourite by far and will keep watching. Thanks for sharing.😃👍🏻
Thanks for the feedback Jeremy 👍
Cracking job.. I'm a fairly experienced hobby detailer but still learning new tricks from you. Much appreciated
Thanks Murdo 👍
@@everydaydetailing6449 how much u charge roughly for a machine polish on a 2006 citroen berlingo sliver van
After a ten hour shift at work, what a great video to chill me out. Keep them coming I love them.
Great video. Thoroughtly enjoyed. Thank you.
It is a great video thanks for the great information and well delivered. This is exactly what I was looking for.
what a transformation
awesome work and Van looks fresh.
This Van needed a good clean.
Thanks Motheo
Great transformation, so glad you’re back and putting out excellent content again, cheers 👍👍👍👍
Thanks Mike 👍
Fantastic final product,well done
Don't stop making these! I think your channel will blow up - your content is the most genuine, always at least a little different given the different vehicles you do, and so well made.
You're literally the only channel I hit the bell icon for and like each video.
Commenting now to try get the algorithm in your favour :P
Thanks for the support and feedback 😁👍 I also hope the Channel grows quite quickly, have already filmed the next two cars which are a little longer but still fast paced and informative
Top job as always, the transformations are always awesome , keep up the good work and keep the videos coming 👏👏👏👏👏💙💙
Thanks John 👍
Yet more great work and brilliantly narrated.
Wow, thank you!
Black wheels looks better then plastic 👍
Great work 👏
Love watching you videos, I used to be a valeter so know how hard these jobs can be but you do it so effortlessly and outcome is amazing
Thanks Sean
The before and afters are amazing 👏
Well done Sir
Thank you so much 😀
Great video fantastic job looking forward to next video 🇬🇧👍
Thanks Richard
Fabulous turn around 👍
Thanks Paul 👍
lovely work. Where you’ve lost some badge letters, specifically the “ch” from Dispatch, I think it’s best to debadge the van. My technique is to:
1. Use a hairdryer to soften the adhesive
2. Use some dental floss to cut through he adhesive pads
3. Isopropyl alcohol and a microfiber cloth on adhesive residue
4. Machine polish the paint
Thanks for the advice Ianmundo 👍
Mate, you are an absolute professional 👌🏻
Fantastic job. Personally would've liked to keep the original hubcaps, but still great result.
Good work my friend 👍
Great video and so relaxing to watch. Keep up the good work.👍👍👍
Thanks 👍
Again great work!! Nice to see that cars like this get so much attention from you!!
the seats turned out amazing
great extractions
Enjoying your videos have to say you do a great job 👍 IV watched one or two other videos but yours are way better well done 👍✅
Thanks for the feedback Rick 👍
Such a nice project again
Don't worry some shorter videos aren't bad as long as they are educational and entertaining like this one.
Nice work have a nice weekend
Thanks Lucas
Thank you for the video. Lovely turnaround there, especially on the interior as it was thoroughly disgusting beforehand. Looking forward to the next video 👍.
Thanks Karl 👍
Thanks for the excellent video content as always cheers
Awesome Job once again 👌
Wonderful transformation! Looks almost new. Shorter videos, longer videos.. any videos are good!
More to come! thanks Matthew
The kärcher camera view was good. Greetings from germany.
Thanks Zenith 👍
Awesome job again EDD!!
Thank you! Cheers!
Great work!
Thank you for my weekly dose of car cleaning... did you forget about the roof? Great job 👍👍
Depends on clients requirements, most want the leading edge, bit above the windscreen or “peak” on the bigger van , basically what you can see from standing on the ground! Very few want to pay for the entire roof as it’s hard to do and very time consuming for something you don’t see on a daily basis! Smaller vans like combos/berlingo’s have the entire roof done.
Just makes me wonder what their houses are like ! let alone how filthy the vehicles are , Thanks for another good video , nice to see you back
Probably makes a pig sty look like the Ritz 😂
@@everydaydetailing6449 ha , probably does ! where are you based ? I have a car that needs scuffs touching in , paint behind wheeltrims and a detail
lovely work👍👍👍
Thanks Rob
Top job again!
Hello,well that needed a a clean and detail,it was a bit dirty from the water,but the time spent it was well worth it.the wheel trims shines the van more than having hubcaps.
Thanks Steven 👍
That van turned out amazing!!! I wish you the best from Show Low Az Usa!!!
Thanks for the view 👍your truck looks awesome.
@@everydaydetailing6449 lol not my truck lol just a dream truck
Just brilliant stuff lo e what you do you are the guy
Phil in stoke
That's what you call a turnaround 👍
Thanks Mark
Very good, I like the short format
Thanks Stewart, will be a mixture of both moving forward 👍
As always a great video, got to admit to being some what worried about engine and engine bay cleaning, speaking to an auto electrition friend, he says that almost a third of his work comes from wet looms, definately enouugh to shatter my confidence.
Ditto. I just daren’t put my power washer into the engine bay. I just spray APC on to an old brush on to the bits I can reach, work it in, then wipe it down with a cloth. I need my car for work & just can’t afford the risk of doing something to it for sake of a clean looking engine especially due to its age & mileage. The bonnet is only lifted by me for topping up fluids & the garage for annual servicing. If it was a show car, then that’s a different thing.
Excellent videos, just subscribed
Looking forward to the VW Beetle. Pretty sure the whole body on them was galvanised so they don’t rust. They will be a classic one day, I am sure of it…
Great work -- and don't worry that this video was shorter than normal! Frankly, I'd rather have a 20 minute video than a longer one, unless, of course, the project really needs the longer length!
Noted! thanks Donna
Liked and subscribed 👌🏼
7:10 that whole sequence gave me anxiety, like it's going to stick wash it off already!!!
Always amazing how people never look after their trusted work vehicle , I cleaned these and worse for 20 years for a retail site would take that ply out pressure wash it paint any scratches outside and in then refit ply in 2 days
It's hard work for sure :)
you do like a challenge don't you lol, love the videos anyway guys
Next weeks video is a real turn around Russ 👍
Hey... Try iron remover from Braindead dateiling, made in UK, so you get it in a few days... Only of its kinf that actually smells nice, and it is most likely the best product on the Old contynent...
Risk it, you will be more then happy!
Put out longer videos, if you can... I watched all of your videos last few days...
Greeting from Croatia!
Thanks Tihomir for the information I will look into that 👍 and I really appreciate you taking the time to look though my video's.
@@everydaydetailing6449 take a look, Jason did all he could that his products can be high end, and that smell was a thing he was wery proud he made actually wery nice...
Well, i watch only the best...
Cant wait dor that longer video...
Greeting!!!
You have my dream job. I would love to be a car valeter.
Thumbs up now....watch later 👍
Thanks helps the channel 👍
Perfect as always! Cannot wait for the bug it looks like its going to be a good one! Hows the rupes uno ? Does it powder up or is it easy to buff off by hand ?
super easy on and off, great product low dust.. but not much cutting power
Vantastic
Thanks
Great great work!
Can i clean my engine bay on a Renault Megane 3 without water and only APC and citrus degreaser ? and use and airline to dry ?
This generation Of Megane is really sensitive on engine bay cleans!
Just avoid the main electrics! Paul dolden details does a great guide with a steam cleaner 👍
Vraiment des superbes vidéos un bonheur de regarder j'adore très bonne continuation pour la suite 👍👍👍👍
Have you compared Vista vs KC PSS on outer trim? Which do you think is longer lasting?
Not tried KC PSS will look into that 👍
Wow, also got the citroen disptach but how long they not cleaned it and got that so dirty? My one still clean😊 thanks for the nice video
Love this videos! Big detailing nerd, question - on the RM van and this van, the rear badges are missing letters / look terrible - why didn’t you remove them and remove the residue?
Usually leave them so the owners can replace the badges and know the exact placement 👍 if they provide new badges, then I’d happily apply them.
tipp topp!!😀
Did you ever get to the spot in the door jam at 9:12 or was that missed
Answer is in the narration 👍
Mega!
What washing product do you use for washing vaccum
Surfex hd or Koch chemie green star apc
A jumpscare warning for your American viewers in the first 30 seconds. It means "cigarette ash".
Thanks for pointing it out 👍 will remember next time whilst doing narration , some times common slang/terminology for cigarettes/and cigarette ash 🚬 in the uk may not translate the same way in different countries! Just like a “sod” of grass is quite normal state side, over hear not so much 😂
Have you tried karcher rm 760 powder for extracting
In the past, very economical to use
💪=👌
Thanks sausages
I prefer to sand and paint the wheels instead of buying shitty wheel covers...but that's me.
Really depends how much rust is on the wheels , and how much the customer wants to pay! Agreed if it’s for your self and you have the time it maybe a better option, to restore the originals
Just giving the comment you deserve
Please make longer videos with some real time ASMR seat extraction clips thrown in there
Hi! Long time subscriber, I noticed that you use a flex forced rotation machine for more than a year. I watched almost all of the TH-cam reviews on this machine. Almost everyone says it's a very smooth machine, but the battery tends to go very weak after about 10-15 minutes. It holds for 30-40 minutes, but not at full speed. Are the 2 batteries that came in the kit able to cicle themselvs between charging and working or do you need to take brakes? Also about the vibrations I saw you attached a foam pad on the battery (I suppose it's for vibration purposes)...so...is it that bad? In the beginnings I saw you used to use a rupes mille, vibration wise how do they compare? Please give us a review on the flex. It's a pretty costly kit and a big investment. You cannot trust 100% the reviewers on internet. I would prefer the opinion of a working man. Just purchased the little one (3" flex) and it's a superb made machine but a bit shaky and I do feel a battery drop when near 2 bars of "fuel". Thank you!
Battery’s last 30+ mins on 4/6 I have a 3rd extra one just in case but rarely use it. In the real world stoping for a break etc you never really run low on power!
Mille was easier to grip as it’s a normal handle.. the flex is heavy on the back end due to the battery.
And you tend to hold on to the base of that rather than the handle grip!
All DA’s vibrate, I added the pad to the base to make it more comfortable when using over long periods.
It’s a good toll and once you have been cordless, it’s very hard to return to a cable powered machine 👍 thanks for the continued support of the channel.
@@everydaydetailing6449 thank you! Keep them videos coming!👋
I would lose the voiceover for it to be ASMR type video. Good effort
Will be doing separate content with that style format soon 👍 thanks for the feedback
How much would this cost?
£200+
@@everydaydetailing6449 very respectable price 👍🏽
How about a short video about yourself? Also can I ask where in the country you’re based?
Was thinking about doing a Qand A around October time 👍
What company do you work for as I would like to send a car to you to be cleaned
I'm not taking any new clients on at this time 👍
1st
As always 👍
🎈
it’s official, ive got a obsession with watching dirty vehicles being cleaned 🫣 haha
The one coming out this week is really bad 👍
@@everydaydetailing6449 looking forward to watching it 🙌🙌
Like the vans , many aren’t owned by their drivers so get seriously abused 😬🧱👍🏼
Sadly 100% right .. however I do have a van on approach.. that's owned by the driver and it's a real challenge!
@@everydaydetailing6449 😬😬 look forward to it 🧱👍🏽