วีดีโอ

That’s alot of layer shifting you got going on

Dude sounds like a weak skinny nerd

I ordered accessories on 5/22 they sent tracking info and still has yet to be received by shipping company according to tracking.

What's up man. Did you get you accessories installed? I recieved mine the other day. I had to print my parts. They didn't send any instructions on how to install the accessories, so I emailed them. They send me a video, but its already out of date. The area to plug in the filter in the video is not on my printer. lol.

Will you please do the square and round tolerance test for the Infimech TX I really need to know. thank you.

Did you ever receive the upgrade kit with the camera and fans? I did and they were easy to install, however, I can't get the <ip address>/webcam/?action=stream to work. I get a 502 Bad Gateway error with "nginx/1.14.2" underneath. Do you have any insight into this?

we need a video on the install!! im trying to figure it out rn lol i bought this printer because of your channel homie. keep up the good work!!

Thanks for the comparison .This seems to be a pretty decent printer. I watch just about every review and test of this machine. I'm more interested in accuracy than speed, especially as Z height increases. Would it be possible for you to do a test to explore this? Some narrow cylinders and square columns at different sizes in vase mode would do it! Maybe 5mm, 10mm and 20mm in diameter - and at different speeds too.

Does the Infimech TX make good sharp corners or are the corners overshot and rounded?

the infimech TX looks extremely promising. i appreciate the lighting AND the sound quality. looking forward to them developing a model with a larger print size, say 350 cubed and anything else they can think of. customer support and reliability are things that take time to determine so while i'm not yet ready to switch, i do appreciate and look forward to seeing how this company develops.

if the Infimech TX Passes the square tolerance There's a very real chance that I might buy This machine. Is there any chance that Cure will work with this machine? Also, can I Print from an SD card. as I do not want to use the Wi-Fi Feature. Would you say that this machine has a better print quality than the. sovol 8 Thank you.

Mine just shipped. I used your link, but wasn't sure if it applied to accessories. I hope you do a video installing them (it sort of sounded like you would only do the video after installation though). I'm basically doing anything you are doing as this is my first ever printer.

The P1S is still the best

Would've been more enticing at $299, the extra $100 for shipping really kills it since there's so much competition at the $500 mark it's almost not worth considering with how little track record they have.

The 99 extra bucks for shipping makes it not worth the risk. Rather go with a p1p for that price.

Can't wait to get mine! Would love to hear more about what you decided to upgrade and why, also a video on installing the new fan since every owner is going to have to do that lol.

FYI. Infimech posts the model files on their website under downloads. if you dig in their google drive, there are step and gcode files.

Without the Bambu Lab printers, we'd still be fiddling with slow and/or noisy, imprecise printers.

Will you please do this square tolerance test with this machine?

And what actually convinced you that flying bear does not fly away like other brands did? What makes you sure it will work with the same quality without issues on long term? What makes you sure 10 out 10 FBear printer will get the same consistent quality? Honestly? I am not a BLab fun. I have my own grunge against their cloud based system, the fact they are closed. Yet the quality they provide regarding hardware wise, i think its sounds a bit silly to questoning after all the reputation they built. (yes even with the recalling of a1mini)

Exactly how big is the bed on the Infimech TX Does it measure exactly Two hundred and twenty millimeters. or does it measure 235 by 235 mm Also have you conducted the tolerance test with the square and round peg. Thank you.

I would love to see a comparison in loudness… before and after the fan ^^ thanks for the vid! Can’t wait for the new one 😁👍🏻 enjoy your stay!

Buy a tripod. You shake more than an grandma with Parkinson's

Is there no connector on the end of the wire for the aux cooling fan?

Awesome man, excited for you to test out the new gear. Thanks for the video.

Could you please share the Sovol SV08 Orca Slicer PetG profile you used for the video

Could you please share the orca slicer PetG profile you used for the video

My unit is set for June delivery, The only real question I have is, will they release a hardened steel nozzle? Or will a 3rd party make one?

This is not really an Apples to Apples comparison be cause bamboo supplies you with a basic petg profile which is not tuned and then you comparing it to a printer that has no petg profiles shipped with it so you have to create your own which is automatically going to be tuned better because you're starting from scratch.

So this is not a fair out of the box comparision? then why do you compare it - almost an hour is painfully slow on an X1 or P1 series, this is possible way faster as others have already suggested you do something terribly wrong - Benchy with SpeedBoatRace Parameters on my Bambu Lab Printer slices with stock settings and the generic PETG profile (which is painfully slow, because it has a crippled flow rate) just over 40 minutes

You can have the same result with Ender 3 V3 in 14 minutes! I tried it! (0 stringing... Though... I did it with HyperPLA... not PETG!)

On orca Slicer try setting external perimeter first and check whether you can keep the flow rate more constant during the entire print. These two should mostly make these things disappear on both printers.

This is the news I was wanting for. Luckily, I fell appon your video and have now subscribed to your channel. I like what you are doing, and hopefully, will you release more on the Solvol sv08 VERRY soon. I have the sv08 on order and am jennuly excited about it. I'm looking forward to seeing you soon. Cheers. Mike Irish.

My p1s dies it in 14mins

Can you show some more prints? Bambu printers have terrible banding at lower speeds especially for PETG.

Man you said a bunch of stuff at the start of the video that you would have to add separately and all I could think to myself is I bought a bambu so I wouldn't have to do any of that separate stuff. Funny enough the x1c was my first printer too 🤣

My A1 is fairly better than this to be honest and for the same price you have the AMS lite so ... good try : )

This is what ive been telling people. The newer printers that cost 1/3 the price have surpassed or matched the Bambu printers. They have all the features and are faster....Buying a Bambu now is just stupid

My bambulab A1 does the same quality in 30 minutes and with half the noise, good try for the sale. ha ha ha

58 minutes to print a PETG benchy on an X1C? Is that using the overly conservative Generic PETG profile Bambu has? Bambu is really conservative with their generic profiles and some of the max flow rates are half of what the filament is actually capable of. When I loaded my Creality PETG profile into Orca, I got a 30 minute total print time with the X1C.

I have those same one quart bottles of Florida 99% iso :o

Was input shaper calibration done before benchy?

Another banger

Nice thanks for the video. As i said earlier in FB will you share the settings?

I better get one before the price changes😂😂😂

I ordered an InfiMech and it arrived with the glass door broken. Glass was everywhere. So I emailed support and they asked me if I would check and see if it printed and they would send me new glass. I didn't want to even take it out of the box because glass was everywhere. I expected a hassle from that point on but what a surprise when the support said they understand then that day they refunded my payment and sent a UPS pick up for the broken machine. I ordered another one. I think once they get further into the US market the price will go up. I am told that they are working on better packaging. I am very happy with their response.

I just received mine and got it fully set up tonight. Where can I find info on connecting a Logitech camera? Should I be looking for the video you reference as it relates to Infimech or Klipper? I'm 1000% so I appreciate any help.

когда новое видео ожидать?

The Ams/multicolor is the biggest feature of the bamboo for me. It's cheap but multicolor is a must for me

im starting to not trust anyone's review who started with the X1C. You all missed a giant learning experience thats not touched on at all in this video. Theres a reason Bambu is loved so strongly in the 3D community but seeing you bash it in every single comment section is concerning. You've hardly used it and you didn't tweak anything. It boiled down to "its quieter and faster for $300". I assume you're either getting a kickback on the link or You've just been SUPER lucky and got two solid printers and dont print outside your comfort zone. i dont know man but this whole video is sus. You also keep contradicting yourself. Zero OOB changes but then talk about changing or altering settings. no mention of infill. temp. part quality. customer support. printable types. available parts. how it sits multi color. the list goes on and on. I also assume you dont use yours for a business. dependability is huge. Id never trust that knockoff