วีดีโอ

Awesome! Let me know how it goes

I have a really hard time disconnecting the fuel line, that’s why I am using those special pliers. For the electrical connectors I have no issues. Just keep playing with them and try to use anti-sizing grease for the electrical connectors next time you disconnect them. Good Luck!

I just learned there are specialty pliers for fuel line disconnections. also specialty pliers for electrical connectors! I'm such a noob. available on amazon

Yes, you can install the headers with the valve as well. There is no issue with removing the cat, I actually had the bike like that for a while and everything was fine. Eventually I did install a fuel controller because the bike tends to run lean, and the controller will add that extra boost needed to run great. My suggestion is that if you get the headers, get the Rapid Bike Evo or Power Commander to complement the installation.

@@Janoo609 thanks for your reply

Yes, it is 10 Nm

There are a few things to consider. One, I recorded the video with an Insta 360, which has a microphone that deletes loud noises such as wind. That’s why on the road test section of the video you hear the horn loud at first and then quite. The second thing is that the Denali SoundBomb sounds more like a large vehicle than a small motorcycle. When people hear you use it, the psychological effect is to asume there is a large vehicle next to them and then they’ll move away almost by instinct. Finally, I did play with the sound of the video to remove road noise (I live next to a highway), and wind noise, which is why the horn sounds week. If I had to compare the sound to a horn from an 18 wheeler, then no, it is not that loud, but it is louder than a pick up truck horn.

I am working on the video for the horn right now, I should have it in a week, but the long story short, I put it in the same location where the cat was.

I just posted the video, you can now see what I did with the horn.

I am very happy, mostly because I can use two fingers and no problem. The quality is ver good and I am very satisfied with that. The reason why I chose these was because I wanted solid levers and not adjustable. After a few years of using them, I could tell you that having adjustable levers might be a better idea. The reason is that on long rides or heavy traffic for long periods of time, they can become tiresome. That way you can install the long lever when riding long distances, and short on shorter rides

Yes. They do not come with a cat

Was it a lot louder? Also do you need a tune or okay to leave it without a tune?@@Janoo609

@@rl_31123 The bike is indeed louder and you do not need to tune it, but I recommend you get a fuel controller, as the bike runs lean. I installed the Power Commander, but the Rapid Bike fuel controller is also very good. In my page you will find how I installed the fuel controller, but if you go with the Rapid Bike, the unit is larger than the Power Commander, but you can install it in front of the air box and between the CPU unit

Thank you, this helps a lot. I will check out your rapid bike video.@@Janoo609

I got it from amazon. You can either search “motorcycle seat screw bmw”, or here is the link: Easygo Replacement for BMW R Nine T R9T RNINET 2014-2020 Motorcycle Aluminum Rear Fender Passenger Seat Bolt Screw Removal Tool-less Quick Release (Black) a.co/d/8Crxf4x

Because I leave the bike in a shed where bugs get it, I put plugs in the air inlet and exhaust to prevent them from crawling into the bike. I use the twine to tie the plugs to keep them together and remind me that I put them on the bike. That way, when I go for a ride, I get the reminder to remove the plugs

can yu share how they sound?

I have not noticed that. I will check that out next time.

This is a very useful walk-through video. I removed mine (2014 model) a few years ago. And this video is spot on for anyone interested in removing their EVAP Charcoal Canister. 👊✊️👍😀

@@outtheresomewhere Thank you!! 👊

You may have just filled up your tank. The canister holds the overflow from your tank, now that the canister is gone, that overflow just exits out the drainage tubes to the floor.

@@TheShagans yeah but it also holds the Gas vapors, it doesnt matter how full the tank is, i always smell fuel after the canister removal.

Did you use the resistors? If you did and still have that warning light on your bike, then the next step is take the bike to the bmw mechanic and ask them to change the codes. The r9T came in two different modes, ready for LED lights (European version), and bulbs (American version). The codes on the bike can be changed, but that can only be done by a BMW mechanic. People use the resistors to bypass the codes

@@Janoo609 I contacted BMW in my country and 3 of them dealers gave me the same solution. “Do not use aftermarket parts. Because the code is gonna pop out no matter what you do”. So to me they just wanna sell the original spare parts which are super pricey. Reason why I’m trying to change my signal light is because the brackets are so fragile it cracked and turned into powder. I’m not sure if it lasted longer in cold weather country. These signals light from BMW are just unreliable.

@@bruceiscurious My guess is that they do not want to help you. They should be able to do it just like they would do if they were installing the BMW LED lights. One more thing you can try is to install the resistor in the different forms they have in the instructions. I believe rizoma gives you like 3 different ways of doing it, depending on the R9T model you have. Try each one of the different options and see if any of those work

@@Janoo609 I will try this next week if they (US FL dealer) can change the code of my 2018 bike LED. I installed New Rage Cycles tail tidy led kit and my bike was getting an error.

On the Triumph as long as there are no error code running the bike without touching it allows the ECM to adjust. Obviously not for extreme engine mods but a muffler swap is fine

I did not put any special torque on it, just hand tight

@@Janoo609 THANKS MAN!

Look for the Pier City Cycles channel here in TH-cam. They have a video named “Removing the BMW R9T Pillion Subframe”. My only comment is, be very careful with the bolts, those are really weak and you will ruin the torx/hex insert if you over turn them. The toque is 5 nm, but still, that can ruin them with that much force

I got the rizoma connectors for BMW. www.revzilla.com/motorcycle/rizoma-turn-signal-cable-kit-bmw?gclid=Cj0KCQjwnMWkBhDLARIsAHBOftp6gMP_SYwn4R3MGT5Lm_KojceOAPYywY81Q2OQ3zv6qnAfHFJMth4aAr7OEALw_wcB&sku_id=1277842

It pretty good, but I have to say that it is not overly loud and does not spit fire

Some people manage to remove it without a special tool, but I used a BMW Coil Plug Removal Tool. If you google it or search it in amazon you will find it very easily

Yes, in NOVA

I was going to add a before and after sound comparison, but for some reason the camera stopped recording in the middle of the stock exhaust sound. I was not happy with that and then I said, “well, if I just add the sound of the new pipes it will make the video longer, and TH already has a video of the sound”.

Please add a video showing off its new sound pleaseee

Recherchez les tampons Scotch Brite

Yes, but I removed it before I made the video, that’s why you do not see it.

@@Janoo609nice to be see what to do with valve

Hello, I am down to ride sometime. I am in Gainesville, VA, and if you need a hand with the installation let me know. Look me up on Insta as “jano609”

@@Janoo609 Cool, thanks. I bought a bunch of parts last night so I may take you up on that offer 👍. I'll look you up on insta and we'll sort out a ride. There are good roads in your area as that's where I go for longer rides.

Yes, the 2022 models should be the same

@@Janoo609 Thanks!

The discount was from BMW and it was in December 2020, I do not thing they still have it

doest to meed a reflash?

If your bike has a powerlet outlet, it should work just fine

Thank you for your answer I just bought the bike yes I have an outlet I just found out but it doesn’t work maybe it’s discontinued I have to take it to be checked

@@mostiella129 I would say it might be the connections, or it was never reconnected when the battery was replaced at some point

Hello there! I am in Northern Virginia