- 7
- 55 555
DSM Enterprises
United States
เข้าร่วมเมื่อ 2 ก.ย. 2021
Hi we are attempting to put out videos of projects that come thru the shop we are by no means a professional video production outfit. That being said give us your feed back on what we can do better or things you may like to see. We are just having some fun Thanks for watching and please give use a thumbs up and a subscription.
EZ GO ST350 Custom Big Block Golf Cart
This cart is for sale located in Stuart, Fl close to I95. I built this cart from the ground up has 6” all sports long travel front kit Briggs and Stratton 20 HP motor with Performance V Twin cam and Rev kit has lights front and back also has brake lights custom paint base coat clear coat, 25” tall tires with 14” wheels, plus much more.
Leave a comment if interested.
$7900.00
Leave a comment if interested.
$7900.00
มุมมอง: 679
วีดีโอ
Step Van PM service and things to look for if buying used Step Van
มุมมอง 8K2 ปีที่แล้ว
PM Service on my Step Van MT 35,45,55 with Cummins and Allison transmission Oil Change my way. If you have any advice or questions leave me a comment. My videos are far from perfect but maybe this will help some people out. As for parts for my truck I use a few resources, Utilimaster they have a great site that uses the vin, Freightliner they also use your vin, Total Truck Parts, any cummins an...
2007 FREIGHTLINER MT45, Step Van, Cummins Diesel, Converted to Shop Truck
มุมมอง 17K2 ปีที่แล้ว
Click and take a tour of my a 2007 Utilimaster Step Van powered by a Cummins 5.9 common rail diesel engine, Allison transmission. I bought this truck 1-2020 and had it painted and built out the box, I also pulled the motor and rebuilt it. If you would like I can put together a before and after video just leave a comment. This truck is former Apria Healthcare truck 00:00 Out side view, 1:15 Carg...
How to Rebuild Yamaha 2 Stroke 90 HP 3cyl Outboard Carburetors With Pilot Screw Adj Spec Part 2
มุมมอง 3.3K3 ปีที่แล้ว
Here we are putting the carburetor back together and installing on the motor where we will adjust the carburetor linkage and we will show you the specks in the Yamaha tune up book. If this video helps you out leave me a thumbs up. And if there is some type of boating project you need help on put it in the comments and if I can help out we will try and put together a video. Thanks Mark Dixon
How to Rebuild 2 stroke 90 HP Yamaha carburetor 1984-1991 tear down for cleaning. Part 1
มุมมอง 3.7K3 ปีที่แล้ว
Here we are pulling a 90 HP Yamaha carburetor apart to clean and inspect, the next video is me putting it back together and on the motor with a linkage adjustment. And to enplane what I am referring to about this motor being cobbled together it was bought as a clean 2001 90 hp two stroke but when we got it to the shop and pulled the cowl off we realized it was not what we thought after inspecti...
How To Rebuild Yamaha V6-V4 2 Stroke Carburetor.
มุมมอง 22K3 ปีที่แล้ว
Here we are pulling apart a 2 stroke carburetor V6-V4 Yamaha cleaning it and showing some things I look for. Just a note before I put it back together I used compressed air and blew thru all the passages of the carburetor. Coming up next we are doing the same on a 2 stroke 90 Yamaha This is the same carb used on a Yamaha 115 hp Yamaha 130 hp Yamaha 150 hp Yamaha 175 hp Yamaha 200 hp And as an a...
Hewes Redfisher Flats Boat Given an Updated Look From David Singer @ Rocky Point Boat Worx
มุมมอง 1.9K3 ปีที่แล้ว
Just a little clip of the work coming out of Rocky Point Boat Worx. This boat was completely rewired, Custom acrylic dash and fold out lift out console door custom back lit badge on side of console , Installed trolling motor , Installed all battery's in forward compartment with a charger, Wet sanded hull and buffed and polished, all new graphics, JL Audio stereo with amp, Simrad , Hydraulic ste...
That's great, whats the towing capacity?
I would buy a used engine or rebuild the current engine
Any thing can be fabricated to fit but as a direct bolt in no it’s not. Big issue is the transmission is all electronic it has an Alison 1000 transmission pretty much the same transmission as a 06-07 duramax would have just doesn’t have 6 th gear activated but there is a company that can reflash the tcm and it will unlock 6th gear. Plus all the motor mounts the motor is set in like an over the road big truck it has motor mounts on the flywheel adapter housing and at the front of the motor transmission is suspended in the air no crossmember
You might know this- I have a chance to buy a 2010 MT45 for cheap. It has a 6.7 Cummins and may need a new engine. I have a 1988 Mercruiser 260 GM 350 low hours. . Could it fit in the MT45? Thanks.
I been a marine tech for over 30 years. You have a great mobile set up. I'm looking at MT 45's as I want to convert one into an RV/mini home. Looks like a decent truck is a little pricey. Your's is bitching nice!
@@glenncivale6824 Thanks sad thing is my back and right shoulder are giving me issues. I have semi retired from marine industry I have 33 years in the industry very hard on the body over time
I rarely use the truck right now a few days a month at best
Thank you
Do you know if the screws are JIS or regular Phillips head? Thanks for the Video!!
SOLID!!!
Your fuel separator may be a Davco and yes that would be correct for that filter. During its service life it may have needed a new filter housing and was replaced or it may have been ordered from freightliner like this ether way it is a great filter assembly and will do the job should be a drain at the bottom.
I check all the mixture adjustments screws if I did not have a manufacturer spec on them but it is not the gospel sometimes as the motors age and our fuel changes so will the tuning of the carburetor. As for the measurements on the float I have been doing this since 1990 and have never really seen a benefit of going that extreme on the float measurements I like to get them so that the bowel is full of fuel
Man this is my main question that no one is ever %1000 clear on... On this model carb how many fuel mix screws need to be counted per revolution as they are taken out? Only 1 correct? Per carb? I usually put a digital caliper on the floats before removing them to get an exact reading on the measurement they sit at so I can match it when I put the bulb back in. Would you consider this good practice or waste of time?
What is the factory idle mixture setting for a 1992 txrq 200?
How can I contact you directly and where are you?
Hi I am in Florida what are you looking for?
looks very professional, nicely done guys!
My dream truck.
Approximately how much was it to replace the engine? Did you do it yourself? Parts & labor?
This is'nt THE worst tutorial I'veever seen, but it's darn close.
Thank you! This was exactly what I needed, particularly under the plate with the rubber caps.
Wow, what a great video. Thank you. My confidence is soaring at this point. I feel like the investment in a small ultrasonic parts cleaner is worth it -- right ?
It will help but a good cleaning solution with compressed air due the job most of the time.
I need a job I'm yamaha expert
What does the low speed jet do if its covered by a rubber plug?
It meters the fuel supply if you look it has a hole to pull fuel from the main jet orifice.
Hey I have a late 80s Yamaha pro v 150 2 stroke I just replaced both fuel pumps after I replaced them it seems to be running super rich is there a way to lean is out so it won’t be smoking as much before I replaced the pumps it was barely smoking only when first started any ideas
Check your oil pump rod when the throttle is set adjust the oil rod until it is close to the sop pin
How do you ajust the carbs..my 200
What model and year
The little plate either the gasket. There are two air jets is there a way you put them in
Hello, how can I read the check engine light code on 2002 freighliner mt45 5.9 diesel with not degital odometer kinda old style
Hello I have one other question concerning the transmission am planning to change the oil but am not sure if I have to, is there anyway to make sure that the oil need to be changed and in case it need to be changed what you suggest safe way to not harm my Alison transmission, for oil I found mobil delvac 1 synthetic atf tes-295 and I think it will need 3 gal also for filter there is one inside the pan am not thinking to go there but I will change the other 2 visible one, for the filter it reaching 15h2o so am thinking to keep it little while and for the steering wheel I got the submerged filter as well gasket that it was suggested to be changed as well once opening the oil reservoir please advice and thank you :)
I have one last question the coolant reservoir where it says cold and hot level whenever I start the truck for couple minutes the coolant show under where it says cold on the reservoir and once it stop after couple hour I see it empty but never reach hot.
I would add coolant when it is cold use the same color coolant that is made for diesel engines in the reservoir. If in doubt you can add just distilled water but be careful if you are in a cold climate it can freeze and cause damage
Okay sounds good thank you
I just got 2002 MT45 cumins 5.9 diesel some parts look same just transmission filter and the fuel filter kinda different my truck just got it has 117k mile and I would like to know how to change fuel filter ( specially curious if they all same when it come to start it to fill up fuel on the new filter) also where to get rest of parts and what’s type of grease to use use for chassis bearings. Leave me you contact to reach you thanks.
An 02 you will have the VP 44 pump and yes it will have the electric lift pump it is a good measure to check it’s operating on every service as long as the fuel filter is plumbed after the lift pump it will prime the fuel filter. Parts I find are best to go to a Cummins or Freight Liner dealer with the engine number and vin. Also for the grease I use Lucas Red
Thank you
Where are you located? Have the same boat and want a seminar upgrade. Thanks!
Great video. Is there a website you recommend to purchase maintenance items? I have a 1999 MT45 that I purchased a few years ago and want to get it going. I’m going to do all of these items that you recommend. Thank you
For parts freight liner dealer also look for any Cummins dealers for motor parts you will need the vin for freight liner and the info on the motor for Cummins also Cummins insight start an account with them it’s free put your cpl # from your motor you will have access to parts lookup along with repair manuals for your motor for the body I went to utilimaster and bought parts for the body another good resource is Mill Supply
Thanks for the video. Good tips. Appreciate it.
Very professional video! Thanks mister good hombre!👍👍👍👍👍👍👍👍👍
Thank you my friend
Looking to buy one of these 2004 cummins are they normally 12valve or 24? anything particular to look out for?
A 2004 will be a 24 valve and most likely a VP series injection pump.
Check to see if it has the 53 block. Also make sure you do the kdp and add a fass fuel pump. These 3 things.
@@dsmenterprises6699 I got a 1997 mt45, my water separator is facing straight up. that can't be right? also it has coolant lines going to it to heat the fuel I'm guessing?
Hey how’s it going my step van has been stalling when I have tried to take off and dose not want to go anywhere after it reaches a certain temp could it be the transmission or could it be low oil pressures?
What year and motor do you have in your van maybe I can steer you in the right direction.
@@dsmenterprises6699 it’s a 1996 international
It is a diesel engine
@@Tv-zx4dl Is it a 7.3L ?
@@dsmenterprises6699 I believe so
I would love to convert one of these vans into a mobile food truck!
Hi, thanks for video. What kind of oil we can use for differential? GL-5?
I got a 03 workhorse p42 and this video has been helpful thanks ....
Thank You and glad to see it was helpful.
You should do a driving video on this. I love the common rail 5.9's alot! They are one of my favorite sounding engines and I would love to see a driving video on it :)
Can you let us know what you used in the ultrasonic cleaner?
Yes 2 parts distilled water and one part simple green. I use the lemon scent. On a side note my machine holds about 3 gallons and I will also put a small amount of dawn dish soap in the water, Never leave carburetors in the ultrasonic machine for more than 15 min it can damage the finish on the carburetor so keep an eye on them as you go.
Cool Stepvan. Diesel engines are nice but I’ve always preferred gas engines. Maybe some day I’ll change my mind. The MT series Stepvans are great vehicles. Thanks for sharing!
Thanks I had a gas box truck before the step van it was good but with the weight I carry I lean more towards the diesel I only averaged 7.5 mpg so with the gas and 12 mpg with the diesel. But
Sorry I was going to say but with the price of diesel being $2 more per gallon plus the maintenance cost for the oil changes and what not the gas isn’t looking to bad these days
Hi
Great job on the video. Ya'll stay safe out there in Florida.
Thanks, appreciate it lucky for me and my Family we are all safe from the Hurricane and the floods.
Thank you. I just got a MT55 and i don’t know it maintenance history on it. I’ve done the two rear seals and checked bearings, refilled the gear oil. Now on to the front and then engine so thanks hoping I can get them filters replaced and all new again. I’m going to buy a powered grease gun after seeing you do it.
For parts I use Freightliner with the vin and Utilimaster for anything that is not related to the drive train. Also I am sure you are aware but Mills Supply has a great selection of parts with pictures for these vans as well. And for the power steering filter mine was part number T1808D
Wish I could get an older one of these for a work truck, but live in California and of course they have serious emissions restrictions on these. ww2.arb.ca.gov/sites/default/files/truckstop/pdfs/truck_bus_booklet.pdf
I here you on the emissions, I was looking for 2007 and down due to the urea portions of the emissions. And if I was smart I would have done more research before the rebuild I could have found a 6.7L short block and installed my old cylinder head on it.
@@dsmenterprises6699 Are you saying build a gas engine with a diesel cylinder head on it? Sorry I'm not up to date on that type of stuff.
@@GlennInLaguna No it would still be a Cummins diesel but the 5.9 short block and the 6.7 can be interchanged and i would have found a used 6.7 motor and used my original cylinder head and accessories along with the 5.9 ecm.
Sweet truck bro! Love it
Are you familiar with the 2006 Freightliner MT 45 with the 4cyl Diesel? I cannot find the oil filter on my truck.
My guess is you have a mercedes mbe 900 here is a link to what you are looking for www.detroitmanuals.info/mbe-900/090404.html
@@dsmenterprises6699 Thank you i appreciate that.
The 130 beto looks like the same carburetor. U know how there must must place the screw for perfekt engine run?
How do I do a link and sync on 99 mercury force 75hp?
It's very similar to the Yamaha I am going off memory but the middle carb has a roller with a white line in it after you have made sure that all carburetors have the butterfly closed you set your pick up roller so that the lines on the roller is in line with the throttle advance cam line start motor and adjust idle. Be forewarned a lot of those little motors only idle on i believe one but maybe two carburetors. Easy way to identify what carburetors work at idle is to look for a mixture screw no screw not working at idle.
whats the best place to order genuine yamaha carb kits and impeller kit? yamaha 175hp 2 stroker
Partsvu
How to mail you mine?
I can do that but would suggest you try and look for someone local to you that is qualified. And I am booked until July 12