วีดีโอ

How do you resent the sensor?

It wears off the brake pad surface pretty quick I just do it to keep it from rusting so fast

You don't paint the roter

Looks good. Thank you for showing us.

dude this is crazy i have the same problem i just finished changing my pads and rotors. I have a 2020 GMC sierra 1500 drivers side rear inside pad was at the metal and out side was at like 60%. It was the same for the right side too i only have 26,000 miles. There should be a recall because this to me is a manufacture defect.

2021 sierra 70,000km, inside pad next to nothing left, outside one fine

If you are only draining the ATF from the oil pan it is not an oil change. Much unlike the engine, in which all of the oil drains away from all of the parts into the pan, the transmission does not. The transmission holds most of it's oil in the torque converter and valve body. This is only a 1/3 oil change.

Works to turn it on. Won't turn it off for me

Had one, crashed it, would stillmiss it every day if i hadnt gotten my e89. Fun little cars👍

I dont like the dash. It seems they have eliminated storage and no room for switches. I dont like the door handles in the middle. How are you going to put an enclosure on it? Also it seems like a lot of places on the door for mud to get in. It will be hard to clean. The tires still do not even come close for east coast riding...Can you put 35s on it without modifying the A- arms?

Pad wear is from the traction control.

Good lord.

Man i appreciate this bro. did you end up changing your rotors as well??

That trick made the situation worse smh😢!!!!

The brake pads wearing unevenly is a GM thing I have a 07 GMC Sierra GMT 900 and I’ve had that happen to me a few times

There is a little pump called transmission fluid/oil pump with like an 1/4 inch hose - you can buy one and use it. I was so mad on Nissan when I found water there that I broke that styrofoam undreamt to remove it. Don’t do it - it’s like a ~$100😮

Damn so 1200 dollars for a shop to do it all isn't really crazy and that's including parts Thanks, I'll pay the piper.

Great video! I broke a seal trying to turn the piston in not realizing I had to put it in service mode. Found this video and it was a game changer.

Release the foot of the brake release you're foot off the button 😅😂😂😂😂. Well sir? Use my foot or finger lol

Check J.A.P.S video on rear brake change he noticed his inside clip was messed up and the spring back action was not working. I would imagine a lot of these trucks are like that and that’s why the inside pad is wearing so soon. Just a theory though. Great video.

My inside pods was zero when outside almost new. 56000 miles

Will this work for a 2019 chevy blazer ?

I changed front pads and RF pad sensor wire on a 2022 1500 3.0L. Now the Brake, ABS, Traction Control, and Engine lights all came on. The brake pedal has to be pushed hard for it to stop, like a power booster went out. And it's in "limp mode" and will not drive over 43mph! The SnapOn scan tool says must disconnect the Brake Fluid Reservoir Sensor Wire to do a six step sequence for automated bleed. You can barely see it let alone touch it. I scanned it and tried erasing all the codes but that still didn't help. Do you have any ideas how to get the brake pedal back to normal, take it out of limp mode and erase all the lights on the dash?

A few comments. By partially removing the intake manifold and not cleaning the mating surfaces or replacing the gaskets, you're asking for an intake manifold leak, as well as for debris to fall into the intake ports or onto the mating surface. You should completely remove the intake manifold, clean the mating surfaces and replace the gaskets. Also, you should prime the oil system after replacing the oil filter housing. You do that by disconnecting the injectors and the coils, removing the spark plugs and turning over the motor. I think you're supposed to do that three times or until the oil light goes off. That way, you know the engine will have oil when it starts for the first time. Finally, to BMW, after decades of producing shitty oil filter housing gaskets, maybe it's time to fire the engineering department.

U forgot the filter

I just never changed strut before I call it shock but has to be fixed save alot money fixing everything myself but his seem to easy mines going be a rust nightmare bought everything replacing whole front end screws it

seems like you should just replace the whole front end since its coming apart

Yeah, but what do you do if you didn't know to do that and now you can't push the piston back in

Whats your setup man please lmk

I do have a question. Do you need to put your truck in “brake service mode” to do the front brakes or just the rear? I must be lucky. 2020 Silverado 84,000 miles and I am just getting ready to change the brakes now, for the first time. I bought the truck with 7 miles on it. All of them wore evenly. Great video helped a lot!

I love how all the bolts came out so easily. Mine were rusted beyond belief. And most of them were off within the last few years. Sad.

It was easier & quicker doing it this way then trying to use the scan tool. Much obliged!

Works on 21 Yukons too

😂wtf? Just remove the engine why don't ya...

will this work on a 2019 GMC Acadia?

Toyota when they cook they cooooook

worked like a charm...had a bunch of dash lights come on after though. Used OBDII scanner to clear and didn't work at first...then messed with some settings and managed to clear the code with ignition on but engine off mode. Now running like normal again

I can’t get the cap off😢

I just watched another video about changing pads and his inside (where the wear sensor is) was much more wore like yours. His was actually wore right down but outside looked exceptional, weird.

Engine noise!!! I guess it’s expected since it’s a high Rpm machine. Heck it’s pulling 5000-5500 rpm’s at 20 mph. Everyone that drives it , says something about it, like it needs another gear, it’s loud, is something wrong with it, we can’t even hear the stereo over it. I got some sound dampening material coming. Maybe that will helpHopefully that will help.

Life saver with this brake service mode.. thnax!! My insides were completely gone while the outsides looked brand new.. curious what would cause that?? Anyway.. thanx so much for your help!! Niagara falls Canada here in my 2019 with only 33,000 kms!!

6.38, you had me going! (thanks for posting)

I paid exactly 300 in Winston NC to empty and fill, I took it directly to a Nissan dealer to be sure, but it turns out they didn't change the filters, I was disappointed and expected the service to be complete but no, I don't know if this is a good thing Have the filters not been changed?

Awesome video man All the in and outs for anyone with a Silverado no matter the engine the 2.7l,3.0l the 5.3l & 6.2l easy job without the dealer telling you that $800 is owed for a brake job 😅

Why Did You Have To Take The Seatbelt Off And Put Them Back On

How much need oil ??to full

I love my Xp , but damn it’s loud in the cab!!!

Yes yes yess🥵🥵

2019 chevy equinox it didn't release

Question: did you leave the dipstick in during operation or change back to the cap after the changeout was done?