วีดีโอ

In this video you'll see me replace the drivers door lock actuator motor in my 2009 Honda Fit Sport. After some testing (and a minor gamble cuz I wasn't certain this was in fact "it") I officially rip my door apart and replace the lock motor to stop the door lock from cycling over-and-over whenever you lock the door. What I'm hearing is that one of the doors can't tell it's locked so it tries t...

In this video I take the interior panel off the drivers door on my 2009 Honda Fit. The door locks cycle over-and-over whenever you lock the door. What I'm hearing is that one of the doors can't tell it's locked so it tries to 'fix it'. This happens when the door auto-lock on takeoff or when you lock the doors with the key fob thingy and walk away. I experimented with removing fuses and found th...

This video demonstrates how to cut off a ring at home (when you can't get it off any other way) with a DREMEL Multi-Tool. This is, of course, DANGEROUS as you could cut or burn yourself by slipping up or cutting into the metal for too long at a time. Also you could jab yourself with the screwdriver (or other prying tool) if not exercising extreme care and due diligence. If you're clumsy or just...

In this video I finally rebuild my original DIY FlowBee which I made out of a cereal box and masking tape. That thing lasted me 10 years!! But I always wanted to "do it right", so here goes! Also, my dinner arrived sooner than expected so I bailed on finishing the beard up properly till later :-D ...it's fine - you get the point of the thing. Enjoy!

This is how to completely disassemble the lid to the 16oz Thermos King Stainless Steel travel mug. Well, I didn't take the screw out of the centre cap but what's the sense in that ?!? The goal here is to properly clean the areas where fluids can get trapped. Enjoy!

Here's a quick video showing improvements I made to a cheapo Amazon racing wheel stand I bought for my racing simulator rig.

Part number 31705 fits all Aqua-Magic V High and Low models.

It turns out that I've blown out the gearbox on the auger... it wasn't just an issue with the belts. In this video I strip the front end down and replace the worm gear in the gearbox, re-grease it, reassemble it, and put my snowblower back together with the *proper* shear pins. Enjoy!

Before really breaking this thing down to change the belts, I thought it was worth adjusting the tension. The parts are working, they just slip once I get out in the snow. In this video I show where the necessary adjustments are made and fire it up for the first time this season.

In this video I rebuilt my tire rack from scratch because my truck tires are *way* taller than the sub-compact tires I originally designed it for. I switched up to 2x6's just to ensure they wouldn't warp over time under the additional weight. Enjoy!

The original attempt was a success, but an improvement was necessary. The top bucket would wedge itself quite deeply into the bottom bucket and I needed something to stop it higher up. The 'Router Ring' came to the rescue. After that I attached the original handle to the upper bucket to make it easier and more convenient to separate without having to take the hoses off. Enjoy!

Here's a cheap-and-cheerful design for a cyclone using just two buckets and plumbing attachments. I bought only the two buckets for this project and the rest of the stuff I used was scraps I had laying around. Granted, there are more sophisticated designs on the market but this works pretty well and does precisely what I wanted: it allows me to clean up bulk amounts of sawdust without wasting v...

Home-made FlowBee out of cardboard and tape. Do your own haircuts at home with no clean-up afterwards!

Sunset Driving - VANTrue S1 front & rear cameras

DashCam -vs- iPhone | Is the VANTrueS1 worth the money?

Diagonal Deck Boards and the CAMO deck system

Using a PDR hot glue Dent Puller kit

How to replace the cartridge (#1225) in a leaky Moen faucet

How to use Seafoam in a Ford F-150

Canadian Tire Rack

Hyundai Elantra 1 Year Follow Up

Yale Assure Touchscreen Deadbolt Review (YRD426)

Installing the Yale Assure Touchscreen Deadbolt (YRD426)

Cutting Deck Boards Around Posts and Awkward Corners

How To Install A Digital Timer Switch

How To Upgrade a NuTone Bathroom Fan

Changing an iPhone 5 Screen - with Outtakes!

Changing an iPhone 5s Battery

Changing an iPhone 6 Screen - Live