- 26
- 11 016
Hansom's Repairs
เข้าร่วมเมื่อ 3 พ.ค. 2024
linktr.ee/hansomsrepairs
Canon EF 85mm f1.2: Rear Element Dust and Debris
This is a really common and really simple repair to do on these lenses, all because Canon decided to not weather seal this very popular and expensive lens!
The gaff tape can be a really big pain, so just take it slow.
The gaff tape can be a really big pain, so just take it slow.
มุมมอง: 25
วีดีโอ
How To Remove That Broken Lens Filter
มุมมอง 28วันที่ผ่านมา
This is a semi-dangerous task. Be sure to always wear the proper PPE and take precaution to not damage the front element with your pliers. Depending on the drop damage, the lens-side threads could be damaged permanently. There is a method to straighten out the ring, but it isn't perfect. If you have any questions, comments, concerns, or requests, leave them down below the like button in the com...
Mamiya C330: Light Seals and Light Leaks
มุมมอง 7514 วันที่ผ่านมา
This is much simpler than it seems! One of the easier cameras to do light seals on. If you've got one of these then you chose a good camera! If you have any questions, comments, concerns, or requests, leave them down below the like button in the comments section! Light seals can be found at USCamera.com Song: Backwards Prod. by NIGMA & GOTY @fatcatbeats
Canon RF 28-70: Front Element Dust Cleaning
มุมมอง 9321 วันที่ผ่านมา
This is a pretty common issue, even for lenses that are sealed. Dust happens! So it's good to know how to fix it. If you have any questions, comments, or concerns, leave them down below the like button. If you'd like to reach me directly, head on over to linktr.ee/hansomsrepairs
Nikon D5: Screen Replacement with D500 Parts
มุมมอง 152หลายเดือนก่อน
This isn't a super common repair, but when it happens at least you have options for repair! If you have any questions, comments, concerns, or requests, please leave them down below! If you would like to contact me personally, please send a message through linktr.ee/hansomsrepairs
Pentax K1000: Bleeding Prism Replacement
มุมมอง 156หลายเดือนก่อน
Be sure to watch out for the counter threaded screws! Don't snap off those pieces! If you have any questions, concerns, requests, or comments, leave them down below the like button! Thanks for watching
Canon G7X Mark III: Lens Unit Replacement
มุมมอง 159หลายเดือนก่อน
This is a much more simple repair than it may seem! The most important part is to remember the order in which the screws are removed and replaced. They are not all the same size! If you have any questions, comments, concerns, or requests, please address them to HR in the comments below the Like button! I've also got a new linktr.ee/hansomsrepairs set up, so please message me there if you'd like...
Canon A-1: Squeaky, Noisy, "Coughing" Shutter
มุมมอง 193หลายเดือนก่อน
This repair is very similar to the AE-1 Canon Cough, but with some extra steps that must be followed or you will break some very sensitive parts! As always, if you have any questions, comments, concerns, or requests, leave them down below the like button! Thanks for watching
Sony A7III: Shutter Replacement and Teardown
มุมมอง 657หลายเดือนก่อน
This has a lot of steps, but if you keep it clean it's not that challenging! If you have any questions, concerns, or requests, leave them in the comments below and HR will get back to you! Music courtesy of @fatcatbeats Prod. by EDBA & RAIAS
Minolta X-700: Shutter Drag Adjustments
มุมมอง 4632 หลายเดือนก่อน
This looks intimidating, but it really isn't. Just be sure to not remove the screw! Only loosen it so that you can move the white gear out of the way! If you have any questions, comments, or concerns, please feel free to contact HR (Hansom's Repairs)! Leave a comment below with any requests, thanks for watching!
Sony A7IV: Main Board Replacement
มุมมอง 1582 หลายเดือนก่อน
Many repairs can be done to a main board without complete replacement if you know how to micro-solder. But since most people don't, it's usually more cost effective to replace the main board itself. If you have any questions or requests, please leave them in the comments below!
Sensor Cleaning: My secret technique revealed
มุมมอง 1502 หลายเดือนก่อน
Sensor Cleaning: My secret technique revealed
Canon AE-1 Program: "Cough" - My Most Common Repair
มุมมอง 743 หลายเดือนก่อน
Canon AE-1 Program: "Cough" - My Most Common Repair
Anti-Static Grounding Mats: Why and How
มุมมอง 1473 หลายเดือนก่อน
Anti-Static Grounding Mats: Why and How
Nikon Z6ii: Back Button AF Replacement
มุมมอง 1914 หลายเดือนก่อน
Nikon Z6ii: Back Button AF Replacement
Canon R6: Error 20 - Full Teardown and Shutter Replacement
มุมมอง 3.3K4 หลายเดือนก่อน
Canon R6: Error 20 - Full Teardown and Shutter Replacement
Screw Driver Comparison for Camera Repair - JIS Crosspoint
มุมมอง 1214 หลายเดือนก่อน
Screw Driver Comparison for Camera Repair - JIS Crosspoint
Minolta X-700: Light Seals and Light Leaks
มุมมอง 6375 หลายเดือนก่อน
Minolta X-700: Light Seals and Light Leaks
Canon AE-1: Fixing Light Leaks with Light Seals
มุมมอง 1535 หลายเดือนก่อน
Canon AE-1: Fixing Light Leaks with Light Seals
뷰파인더 글자가 일부 표시되지 않는데, 뷰파인더 교체하는 영상 부탁해
I love your vibes bro lmaoo keep up the good work!
thats me today, the reason why im looking at this video on a wedding day , my hotshoe came out stuck the my V1 Flash
This happens very regularly with the V1. It's a super heavy flash and you're hinging all that weight on this little hotshoe. Don't let your flash hang from your camera and you can make it last much longer.
Do you happen to know how to replace the rear wheel dial? I ordered a replacement because mine was damaged but it seems impossible to put the wheel back on. There’s a tiny spring and ball but I really don’t know where to put it.
Thank you so much for this video. 🙏🙏🙏 Mine just broke off today and i am stressed. Please where did you get the replacement button?
I took this one from a donor camera body I had, but you can find the parts online. I usually have to get them from eBay since Nikon doesn't provide parts any longer!
Sir! You are awesome, Thank you for your help and advised too. God Bless. Roger
Thanks for the Tutorial. I am changing the Prism on a £5 MIC K1000 I picked up in a sale - waiting for a shot Canon T50 to strip for prism. Very helpful. Best wishes.
LOVE THIS VIDEO....Wonderful job....thanks.
Do you have a website? My minolta is having the same issue as the camera in the video. Do you still do repairs?
Yeah I do repairs every day! If you'd like, send me a message through my linktree. You can find it in the bio of my youtube profile.
so this just happened to my a7iii - no warning. Was taking pics and suddenly heard a weird click and the shutter is messed up. I was quoted 1K for the repair. Sounds kind of crazy. I use the camera daily So I went out and just bought another a7iii. Maybe I'll try and fix the broken one just to see if I can repair it myself.
hey! thank you for the video, mine is bleeding and I would like to replace the prism but I can't seem to find it anywhere, where did you buy yours?
I had to take this prism from a donor camera that was broken beyond repair. That's sometimes how this goes, no parts available so we gotta take from other bodies.
This is one of the best camera teardown videos on TH-cam I've seen, EXTREMELY helpful narration and super clear instruction. Looking forward to future content!! (If you ever do the M50, will love you haha)
Thank you for the kind words! I'll add the M50 to the list!
Hi Hansom. Thank you so much for this video. You have no idea how much this helped me! The Nikon D5 is (in my mind) the best SLR that Nikon has ever made (bar the new Z9). I have owned the amazing D700 - what a workhorse, the D750 (again great camera). Isn't that D5 12fps shutter (amd also 14fps...) just so adictive??? Man... I have been a photographer on and off for around 32 years. I bought a D5 around a year ago (for around £750 - $1032 - good deal I thought so I sold my D750 and my 70-200mm F2.8 VR Nikkor lens to afford to buy the D5) - there is a hairline crack on the reart bottom left scroll wheel surround and the shutter count was around 440,000 (they can go to over 1,000,000) - but all working OK. The rear top right thumb rubber strip needed to be replaced (very common rubber strip to wear down/away). I could not find ANY how to guides for the D5 take apart - I guess because so few were officially purchased (around 35,000 worldwide I think). Anyway, I bought the part (thinking it was an easy rubber piece to replace - but NO...) I then realised that there was an entire plastic piece BEHIND the back panel that needs to be screwed in etc. Big job! Nikon UK were going to charge me £60 ($80) and then I came across this video and I have now successfully replaced the rubber thumb strip for free! Thank you Hansom! One small issue, I had an extra screw left over.... oops. Anyway, thank you for giving me the confidence to attempt my 'repair' myself. All working OK and ready for my next rock/metal gig! I have subscribed.....
what website you use for the parts?
Some parts and tools can be found through Encompass, but I have to visit eBay for a lot of parts, especially for older cameras.
Hilarious video man! Definitely saving this for the future. Thanks for the great pacing.
Bro💀
thanks for the video where can i buy the replacement part?
If you type this into google you'll be able to find it: "sony a7iii 149019334" The part number is the long string of numbers, you can usually find them from companies like Encompass Parts, but sometimes you have to buy from eBay. Good luck on your repair!
@@HansomsRepairs thank you for responding, i actually need part for my a6000 it only has 257 shutter count. i see some information about adjusting the shutter spring. do you know if it is possible to fix it that way?
Can I ship you a mark 2 for lens replacement?
Send me a message through my Linktree in my bio
I didn't quite understand, did you replace the main board that needs to be programmed? Did I understand you correctly? But your camera worked. Can you explain?
Bro, help me please. I connect dummy battery with 100W quick charger, and now mya camera broken. Tell me please, which part is most likely out of order? And approximately how much will the repair cost? I don't have a service center in my city and I'll have to give it to private electronics repair shops
where is the power module located?
Hello. I connected a dummy battery to a 100w quick charger and 20v came into the camera instead of 7.2v. Do you think the mainboard should be changed or will the repair be cheaper?
This just happened to me yesterday and I need to know if I should change the board or not
Mine has an issue with the shutter not working and allowing me to wind the film advance. I replaced the batteries but still won’t work.
You have to replace the capacitor ( 10 uf, if I remember right ) . Have done this on several stuck 300, 370 … same with 700
@@klausphotobaer5754 yeah, unfortunately when I went to open up the camera it had way to much corrosion and wetness inside from the previous owner. Smelled terrible with that vinegar type smell and everything was fried from a bad battery being left in it.
@johnnoblitt8312
I would love to see a video on light seal replacement on something like an AE-1. Thanks.
That was my first video actually! Check it out
hey man! do you do mail in repairs?
check my lintree in my bio, send me a message!
@@HansomsRepairs done! thank you man!
Very helpful, thanks
8:01, You never placed this middle flex cable back during the reassembly.
Hey would this be similar of a process to the a7siii?
Awesome!
Cool
Did you fix it though ?
Amazing!!! Now I know how my A7iv look inside! Jizzz lots of screws ☠️
Thank you so much for the video, I was able to successfully replace the shutter! Is it possible for the motor to seize but you can rotate the gear (22:10)? After replacing the shutter I still get an error "Error please power camera off then on". With no access to any menus. I can hear the shutter actuate and even move, but it doesn't stay open as it should, and since the shutter is replaced, I am inclined to believe it is the motor causing issues as a replacement shutter has had no effect (the old shutter did the same thing and had no visual damage). I have been digging through forums for hours, and I feel like it is hard to narrow down the issue with such little information available online. Just thought id ask here too!
It's most likely a loose or disconnected flex cable. Disassemble and check your connections, the motor is most likely fine.
Can i do this exactly the same way on a x300?
The process is similar but the X300 does encounter a similar issue!
Does the Minolta SRT 101 have the same problem / solution by any chance? Thank you very much!
No, the SRT 101 doesn't have the same issue.
SRT is completely different ( completely mechanical ) . Service Manual is available online
Daaamn!!!! My Minolta was release shutter without film easily…with film after 2frames it stacked. Replaced capacitors - didn’t help…. Tried this one with gear and it helped Bless you man!❤
I don't like it when you have to pull off the leatherette in order to get to the screws. Hiding the screws is ridiculous.
How can I reach out to you??
Where are you located?
Thanks for your video. I used it as a guide to replace my Sony A7IV main board. One question: My virtual level is not working properly. Do you think I could have forgot some flat cable without connecting it? Or might be the board? Supposedly, I think the virtual horizon thing would be a component in the main board, am I right?
Just a follow up. I made it work. There was a cable disconnected, the one that goes on the right upper part of the main PCB, close to where dials and shutter sits. It is a trick cable to connect, I probably didn’t connect it right so was having those horizon problems.
@@brunonunesfoto Good on your for figuring it out! Nice work, I'm glad the repair worked to fix your camera. Thanks for watching!
@@brunonunesfotovc é da Baixada Santista?
i've heard online there was calibration to do? just wondering if that's true or not
So, yes. You technically would calibrate it after installing the new shutter. However, this requires a Sony Home Key which buying one secondhand is around $30k. I don't think you need to worry about it. Just focus on doing the repair correctly, connecting all the cables and flexes, and don't miss the little metal spacers! Good luck on your repair.
Nice job 😀 How many actuations is the shutter on a7lll good for? Also would you say it's a reliable work horse apart from that ?
Great video, loved the jokes also lol. Never stop making videos!
Very nice music choice, a man of class I see
Hello Hansome, where can i send my camera for repair😅. I have sony a7 iv with broken mechanical shutter
Hey Hansome, I wanted to ask that is it fairly easy to replace Sony a7iv hot shoe or do you have to disassemble most of the body to do it? And where can we find the replacement part? Btw really LOVE your videos!! SUPER HELPFUL never stop making these video 😊
Hi! Thanks for watching I'm glad you're enjoying the content. Unfortunately, the hot shoe on Sony cameras isn't as easy as Canon's R series cameras (like the R6). Because it's a smart hotshoe with connector pins, you have to disassemble basically the entire camera and you've got boards on top of the hotshoe screws. It's not a super common issue, so I don't get that repair very often, but I might make a video on it!
Just took a look at one I have in for repair for a different issue and I've found that it's easier to just replace the entire top cover than it is to replace the hot shoe. I recommend looking into that before going for the specific part.
That's a nice Omega you got there sir.
very informative thank you 🙏
100 bucks
Thanks for this video.