วีดีโอ

@@anorakman1083 Thank you for your kind comment and for watching the video 😊 Please mention NJWMOTO to Abba when you purchase anything it really helps the channel 🙏

@@petersean777 I thought that as well buddy, however checked my order it’s definitely the high comfort seat as per my order. The mid and low seat do have a curve to them the high seat is flatter 👍🏻 I know it’s-a comfort seat as well because its heated and you cant get a heated non comfort seat 👍🏻 Thanks for the comment and visiting the channel 😊

@@ahmetuygur Not on this ESE it is the switched version, if your removing the servo its best to fit the Standard ESE this eliminates the servo, this version just allows you to switch between fully open, standard, and closed quiet modes Hope this helps

Thanks njw 👍🏻

Thank you for watching and your comment 👌🏻

I cant answer this buddy but I must say I was surprised to see it myself, there cant be any cost saving when compared to cast alloy 🤷‍♂I guess its about experimenting with new materials only thing in this case is it does not work 🤣 Thanks for your comment and for watching my content.

Hi buddy, it is tight when re fitting the seat but it definitely does fit 👍🏻 It needs a bit of shuffling around 😂 As for the heated seat there’s a few people with the same issue having all the wiring but not active, now im told that in good time this will be programable but as the 1300 is so new its still being worked on by 3rd parties. Have you asked your dealer if they can do it or is just the standard can’t be bothered to find out for you Sir ? Thanks for watching HNY 🎉

Hi@@NJWMOTO Thanks for the reply!!! When I tried to put it in I saw that the fit was quite offset but I will try again if you confirm that it goes in correctly with a little effort. As for the seat, yes, I asked my dealer but I think the answer they gave me was a bit ambiguous... I imagine they said no directly although I find it very strange. I hope that in the future it can be enabled. Thanks!! :)

@@akru96 I’m hoping Hex GS 911 will be able to enable this eventually so watch this space 👍🏻

Have you activated the voice commands in the camera? They have to be active in the 360 X4 Does your SRL 3 call Siri or Hey google on your phone if it does it should work. Mine works ok not brilliant at speed but it definitely works. Thanks for watching 🙏

Some people don’t buddy mine is totally fine now 👍🏻

@@BIBuildy Excellent thanks for watching and commenting hope you could mention the channel when you place your order 👍🏻

Yes thanks for the comment and visiting the chanel 🙂

Hi, thanks for watching the channel and your comment, Yes I could make you a splitter cable no problem 😉 My email is in the description

@@jamescurrie1285 Unfortunately not James, if you were to add a spur into the existing brake light circuit for example, the can bus would sense the load and cause an error, you could use the signal from the circuit to a powered relay to do this but it would be messy and require power from an ignition source. If you think of the ezCan as an electronic fused relay on a network that can access all the signals and use any of signals to share the output and provide customisable control this is what it does. Thanks for the question

Hi buddy, ensure you delete all pairings on headset reset to factory, ensure you set the SRL 3 to use GPS pairing then search for the SRL 3 on your X4 under the airpod logo in the menu hope this helps 🙏

@@NJWMOTO I have done this procedure several times but nothing. I read that Sena has not declared the SRL3 model compatible. My doubt is how did you manage to do it? 😂

@ Buddy I promise you it works and perfectly have you updated the firmware on your Srl 3 ?

@@NJWMOTO the last one

@@polytimiboznou_LaMotorista Hi buddy thanks for the comment, On this occasion I was using the Sena SRL 3 fitted to my helmet and paired to the 360 X4. Enjoy your ride my friend and happy new year 🥳

@@NJWMOTO Thank you very much❤

@@gillianbrodie6807 And thank you for your kind words and visiting the channel 🙏

It possibly would buddy but the reflector would possibly have to stay where it is as the unit serves as the number plate lights, I did try to disassemble the reflector but it appears to moulded into the plastic in one piece 🤷🏻‍♂️ I will experiment with this when I find a cheap second hand reflector light unit, you could possibly bond the Denali light to the reflector with double sided tape but not sure if it would look great if it doesn’t match the reflector profile 😊 thanks for watching

@ thanks for your reply

Thanks again happy 2025 all the best to you and yours 👏👏🏴󠁧󠁢󠁳󠁣󠁴󠁿

I get my new 13 gs on Tuesday 🙏

It never ceases to amaze me what parts are shared between different vehicles 🤷🏻‍♂️ Appreciate your comment and visiting the channel 🙏

Thanks for the suggestion sorry its annoying to you, most find it engaging I will take your suggestion forward in an up and coming video and see how it goes. I do find it’s hard to please everyone buddy 🤷🏻‍♂️

Thanks. Sounded to me like music coming from another room

Thanks for the comment heres the link to the product used 😊 th-cam.com/video/U_4Hs2KmXV4/w-d-xo.htmlsi=OY8AKqR8W3cLBZiG

​@@NJWMOTOCheers mate

Many thanks for the kind comment Danie Merry Christmas 🎄 😊

Hi Buddy of course sorry I did not cover this in the video 😮 My headset Senna SRL 3 is linked directly to my phone via the Sena app the phone then links to CarPlay simple 👍🏻 volume is controlled via the SRL 3 😊

@@vr46shing48 Hi good point and thanks for the question, Yes the apps are running but in the background I assume power consumption will be slightly increased but as you are not using the screen which is a big power drain this will be much les, when I use the device in long journeys I would pop my phone in GS pocket and put it on charge 😊

@@rubendesmet3197 Thank you for your kind comment 🙏 I have never had disconnection issues with any of my Chigee devices 👍🏻

@@emmanuelbitsch3616 Thank you 🙏

Watch this space buddy the W702BS is coming soon its on its way 😊

Hi Buddy if you are trying to buy AIO-5 For BMW please use the 10% code we cant offer 20% on this unit at the moment sorry, if this is not the case please let me know what you was trying to purchase so I can fix the issue.

Thanks for the comment Graham 😊

@@amolin32 The bracket measures are in the video the holes are approximately 4mm 👍🏻

@NJWMOTO thanks I just saw it.

Wow some milage that buddy 😮 Thanks for the comment 👍🏻

Sorry you’re not a fan of the newer generation of BMW bikes buddy, I must say my experience with Vertu Motorrad at Rotherham has been very good and found them helpful and proactive 👍🏻

Funny thing is my 1250 had to have a Right hand cylinder head 😂 Appreciate the comment 👍🏻

Yes I am! Buddy looking for your email

@@NJWMOTOhey, I’ve checked my email but I can’t find a reply. I’ve just sent you another one. Hopefully that will come through? 😊

@@simonrichardson3167 Appreciate your thoughts and a lot of additions are personal choices buddy, I believe the function out-ways the aesthetic form particularly in this case 👍🏻

Thank you for your comment 🙏

@@TheFozzy222 The fender extender I fitted fits the GS and the GSA 1300 buddy 😊 I belive the mudsling will be available around the end of Q 1 2025

Thank you, I’ve just looked on nippys and you can pre order them but it’s not clear if the mud sling will fit the GSA, Im going to email nippys now tho 👍👍

@ I’m sure NN will give you that information Please mention NJWmoto 👍🏻

@@RogersMotorcycleAdventures Hey Roger thanks for the comment, hope you get the mudsling soon personally I can’t wait 😜

@NJWmoto same. Andrew told me that he expects it to be ready in late February or early March.

@@markshirley7639 Absolutely Mr Shirley! 💯 I cannot say this any better 👍🏻

@@iscadean6038 Indeed Sir sounds like a bargain particularly if it is real carbon fibre 😮 would that be bonded on or double side tape ?

@@NJWMOTO Of course no carbon. Cheap ABS. It's taped with double-sided tape, which doesn't hold much. Money wasted.

@@hewlett62 This reinforces my penny wise pound foolish theory buddy, buy once fit and forget 🤷🏻‍♂️ And then when you take it off it’s still worth at least 2/3rd of what you paid or more so the return to pocket is better in the long run as the cheaper versions are not worth anything second hand 👍🏻

You must be frm Yorkshire 😂

@ price was secondary. Fit and finish were primary. CF looks lovely.

@@steventaylor9928 I have to agree 💯 thanks for the comment 🙏

@@redman2751 which product buddy ?

Oh 😮wow I was not aware of this model I will investigate thanks for the heads up buddy 👍🏻

Watch this space buddy I’ve ordered one ☝️

@@NJWMOTO i can't wait to see your review.Also, try to get your hands on. The new Chigee AIO 6 BMW version with cameras. Pre order should be soon.

And thats what biking is all about horses for corses buddy it doesn’t matter what you ride as long as your enjoying what you do ❤️ I also find the majority real of bikers don’t discriminate they welcome anyone with a common interest in our passion 👍🏻

​@@NJWMOTO "real bikers"....

No sir no hydraulic tappets they are adjusted by means of a measured shim 👍🏻 This seems to be the common method on all motorcycles