วีดีโอ

H2o concepts claims to soften water without using salt. I cut open their AMP force device that is supposed to perform this feat and was not impressed.

Completely stripping down the DJI Mavic Air to the bare chassis shell for repair. All components are removed including the Main Board with CPU, speed controller (ESC), GPS, Gimbal, Motor Arms, and Distance Sensors.

After replacing the gimbal on a DJI Mavic Air you need to perform a Core Board Calibration. This is not the calibration done through the DJI GO 4 app. I walk through the software installs and commands needed to complete the calibration.

Peloton Bike: Installing and Removing Pedals

Replacing the auger belt on my Ariens 624e snowblower. The belt is a 1/2" x 40" vbelt, kevlar is recommended for extended durability

How to replace the alternator, ac compressor, and steering pump belts on a Gen-1 Toyota Tacoma with the 5VZ-FE engine. Factory Belt Part Numbers: Drive Belt Alternator 4PK1050 Drive Belt Air Conditioner 4PK870 Drive Belt Power Steering 4PK1070 The tension bolts are all M8 x1.25 pitch Bolts heads were 14mm and 12mm

Stage Rally Event

Using a Harbor Freight soda blaster to clean carbon from my Subaru TGVs

How to clean your fuel injectors for less than $20

Bench Testing a Defi racer series pressure gauge to identify the voltage range for the Defi PDF00703S pressure sensor/sender.

Check for rod knock or a spun bearing without pulling the motor. This is on my Subaru WRX ej205 but will be similar for others.

How to resurface an aluminum Subaru cylinder head using a piece of glass, sandpaper, and spray adhesive.

Confirming that a bearing has spun or slipped with the heads removed from an EJ205 without pulling the oil pan.

Noisy rear wheel bearing on my 2002 Subaru Impreza WRX. In-depth video explaining the replacement process using a harbor freight press and an air hammer.

Mishimoto vs HPS T Clamp Review