- 17
- 37 733
Ian Birkett Action Media
United States
เข้าร่วมเมื่อ 13 พ.ค. 2019
A place to see mountain bike and bmx riding content and all around fun! Plus the occasional product review.
--20% discount @ cassette optics if you use twowheeled_photos20off at checkout--
--20% discount @ cassette optics if you use twowheeled_photos20off at checkout--
How to decide on what bike to buy or what parts to get to build one.
Want to build a mountain bike, or any other bike, from a frame up but cant figure out how to pick your parts. Well I went through the same struggle and decided to put a video together to help make that process a little less difficult.
Hope you enjoy watching this video as much as I enjoyed making it and hope it helps you build your perfect ride!
As always, try to support your local bike shop as much as possible but incase you cant get everything from them, here are some great places to find parts...
www.chainreactioncycles.com/us/en
www.jensonusa.com/
www.bike24.com/
nukeproof.com/
Hope you enjoy watching this video as much as I enjoyed making it and hope it helps you build your perfect ride!
As always, try to support your local bike shop as much as possible but incase you cant get everything from them, here are some great places to find parts...
www.chainreactioncycles.com/us/en
www.jensonusa.com/
www.bike24.com/
nukeproof.com/
มุมมอง: 118
วีดีโอ
2020 Nukeproof Scout bike check and first ride.
มุมมอง 11K4 ปีที่แล้ว
Finally finished building my nukeproof scout and it awesome! In this video I'll do a quick bike check and a few laps down my local trails. Enjoy
How to swap BMX cranks onto your MTB or dirt jump bike.
มุมมอง 22K4 ปีที่แล้ว
An in-depth tutorial on swapping your standard mountain bike crank set for a BMX style crank set. All the parts and knowledge you will need and how to get it done without creating problems. Thanks for watching and ENJOY...! Parts... Deity Components BB www.deitycomponents.com/store/p62/DEITY_EMBASSY_BB_KIT_///_EXTERNAL.html Mission Transit 2 cranks www.danscomp.com/mission-transit-v2-cranks-bla...
Traveling MTB Ep. 1 // Riveter Wellness Arena
มุมมอง 6544 ปีที่แล้ว
A quick weekend to Asheville NC where I visited the southeast's newest action sports complex, Riveter Wellness Arena. Riveter caters to outdoor dirt jumps for mountain bikes and BMX bikes alike, indoor rock climbing, and yoga studios. Complete with a full service bar partnered with Sierra Nevada Brewing Company. The next time you are in North Carolina, be sure to check it out. You wont be disap...
Giant bike demo. 2020 giant reign 29"
มุมมอง 4104 ปีที่แล้ว
A quick look at the 2020 carbon reign 29er. Amazing bike and actually not as much as an aggressive bike as you may think. Enjoy!
Oh Christmas Tree 2019
มุมมอง 174 ปีที่แล้ว
Quick and dirty little project. More of a spur of the moment idea than anything but fun to make none the less. Hope you enjoy.
Welcome to my channel. IB Action Media presents
มุมมอง 994 ปีที่แล้ว
Welcome to my channel. IB Action Media presents
West Coast Vacation. Oregon
มุมมอง 454 ปีที่แล้ว
My girlfriend and I took a trip to Oregon for her birthday and saw some pretty breathtaking sights. So of course, I came prepared to film it. Hope you enjoy! like, sub, comment... locations... Mt. Saint Helen's national memorial park Canon Beach Equipment... Samsung Galaxy S9 Moment wide lense 18mm Moment anamorphic lense DJI Osmo Mobile 2
A Good Day to Go Ride\n--a short edit at trail creek in athens georgia--
มุมมอง 3714 ปีที่แล้ว
A quick edit of some riding done at my local trails and skate park. Like, subscribe, comment and as always... Enjoy
Riding some epic dirt jumps and flow trails.
มุมมอง 924 ปีที่แล้ว
Early Friday morning session at Hilltop Mt. Rest South Carolina. Finally got to test out my DJ at some proper dirt jumps. Met some pretty cool new dudes that are, in a lot of peoples opinions, living the dream! Living, digging, working, and playing all in the same spot. Enjoy! Like! and Subscribe! Check out the young senders IG's here..... dialeddirt ... rutherforda...
Beer run to Creature Comforts brewery
มุมมอง 795 ปีที่แล้ว
Quick edit of a different kind of beer run to my favorite brewery... Creature Comforts! And of course a little riding action to top it off.
Sensus Grips bachelor pad install and review
มุมมอง 1.1K5 ปีที่แล้ว
Today I finally get to put my new bachelor pad on and give it a review. Then get some trail time in and once again proved why you should always wear your pads! Enjoy shot on galaxy s9 and gopro hero 5 black edited on adobe premier pro tailgate pad: www.thesensus.com/ sunglasses: cassetteoptics.com/ 20% off discount twowheeled_photos20off @checkout bike parts from: www.jensonusa.com/ www.bike24....
7iDP flex knee shin combo pads review
มุมมอง 9585 ปีที่แล้ว
7iDP Flex Knee Shin combo pad review and trying out the newly freshened up tabletop hip jump at Trail Creek. Enjoy! links for products below . . . pads: 7protection.com/us/product/flex-knee-shin/ (I purchased mine on JensonUSA) filmed and edited with: GoPro Hero 5 Black Adobe Premier Pro dont for get to check out my glasses sponsor for a sweet deal! cassetteoptics.com/ twowheeled_photos20off @ ...
A day at a brewery!
มุมมอง 1915 ปีที่แล้ว
My girlfriend and I went to visit my parents one weekend in Cleveland GA. So why not swing by the new local brewery for some great craft beers. Tantrum Brewing Company did not disappoint. Be sure to check em out if your local to the area! . . . Video shot and edited on... Galaxy s9 Moment anamorphic 1.33 lense Adobe premier pro
Athfest 2019 and Uncle Earnies pub-deli tour
มุมมอง 425 ปีที่แล้ว
Short tour trough Downtown Athens Ga during the annual Athfest and the debut of Uncle Earnies Deli-Pub. If your local to Athens be sure to check em out for lunch, dinner, or beers with friends and family. also... if you want 20% off some kick ass sunglasses go to cassetteoptics.com/ and use twowheeled_photos20off at checkout. film shot on Samsung Galaxy s9 with a Moment anomorphic 1.33 lense an...
Trail Creek Park Athens Ga on a jump bike. 2018 Octane One Zircus custom build.
มุมมอง 3805 ปีที่แล้ว
Trail Creek Park Athens Ga on a jump bike. 2018 Octane One Zircus custom build.
Profile Racing makes many BB for conversions
This will hopefully help with my slopeduro build😊
That’s what I’m trying to build,what do u have and what specs I’m trying to get ideas for my specialized enduro
@@user-vj6cl5fl8d dawg the cranks got stuck now I got full sus 🤪
Can you send me a link to that bottom bracket for sale in Canada BC man or whatever brand works
You mentioned you didn't want to spend too much...how much do you think you have into your bike build? In looking at it, I can't really think of anything it needs.
do you use a standard dirt bike chain?
No problem! Honestly, the chain slipping is more than likely a bad chain line. As in, your driver and chain ring aren't in a straight line relative to each other. That was one of the reason I made this video and went to the setup that I did.
Very helpful cheers
What is your height?
you sound like Randy Santel 😁
What forks are those?
Fox 32 but they are lengthened to a 34.
What size is your bike?
XL
what size that bearing ya?
Really nice video, super helpful! Also, Deity no longer makes the bottom bracket that was used in this video, but octane one and Dartmoor both make bottom brackets that will work.
Please tell me which ones haha cheers
I have a question, i got a 73mm bsa, threaded, and got a dartmoor bb set, are there any chances that the spindle will not be long enough? Or i am just anxious? I want to get the same cranks that you got.
73mm bsa threaded, 19mm inside from dartmoor**
I think you would be fine. I think most crank spindles are usually longer than the bb anyway. You'll just have to make sure that you have spacers.
@@ianbirkettactionmedia412 spacers on what like inside the bb set to put the 2 things on the parts, or for the spindle?
i mean like you showed some spacers to make 68 go to 73, is that what you are talking about or you re talking about putting it on the cranks spindle/axle?
The bb you have should already have spacers on it between the bb and the frame. Then you may have to add spacers between the crank arm and the outer face of the bb so you can get a good chainline. Sram's website had a good diagram to explain it better than I can.
What do I do if I have movement from left to right ?
Make sure your cranks are tight and if you still have play in them, make sure you have the right spacers between the drive side crank arm and the bb shell (frame)
I have seen that you can no longer get the deity bottom bracket. Is there any other bottom brackets that would work?
Not sure, it took me a while to find that diety kit I had.
Dude, i hope it isn't too late to get read! What about the spindle size? I broke my cranks on my p1, it was a bmx crank, but every little info i can get is that if i guy a bmx crankset, the spindle will be too short!?
So how do I do this on a frame that has the bottom bearings pressed in ? No threads
i appreciate ur genuine energy in the videos you make. Talking to the camera like a normal person n not in that weird ass youtuber dialect makes it way more digestable lmao. I actually found u from the video you made on putting BMX cranks on a MTB. Definitely subbing lol thank u man.
Shout out lods
great video... but why the f would you put chromoly cranks on an aluminum frame, material engineering failure.
I chose those cranks because I've used them before and I've never had issues with them.
I've got Xl Scout love it good vid
Sorry if I missed it but are you on the Scout 275 or 290? Also are you having any issues with pedal strikes? I've heard the low frame posture causes a lot of pedal strikes
27.5 wheels, I get a strike every now and then but I also 175mm cranks.
i went XL on my vitus, because i was on the end of the large, those nukeproofs are much longer, do you feel a little stretched out, or is it a sweet ride overall?👍
Nice edit. Where is that bike park?
Thanks! Its my local trail system here in Athens GA.
@@ianbirkettactionmedia412 Skate park is in Athens too? I live in Gwinnett south of Athens.
Yep. Its not much but I grew up skating it since opening day almost two decades ago. Its the best lol
@@ianbirkettactionmedia412I can’t find it cause it’s not in trail creek
Great video. Thank you! It is hard to find this information anywhere.
Glad you found it helpful!
How tall are you?
Thanks man. Really need this. Hope you make other great videos and godbless
Would a 24mm BMX spindle fit a MTB bottom bracket?
How do I know how to measure and know?
They have warehouse in USA
Crc? I didn't know that.
Do you think it would work with a 140mm spindle instead of the 150mm I’m pretty sure the mission has? I want to do it with a splined sprocket.
Idk, I guess it would depend on if you could get the correct chainline. Plus you would need to be sure your crank arms have enough spindle to attach to. You wouldn't want your crank arms hanging half way off your spindle.
Thoughts on this tailgate pad after a couple seasons of use?
I got these cranks for my BMX but the sproket I got is like 2 small
I wanna put bmx crabks on my dirt jumper its threaded bb shell and i wanna buy euro bmx bb ehich is also for threaded,how do i know its gonna fit?
I believe the euro is the smaller one. You just need to figure out what your bb shell size on your frame is and find the correct size bb. What frame do you have?
im in the market for a new bike in the spring its between the scout and the vitus sentier cant make up my mind
I have a Saracen amplitude CR2 with mid type BB. What do I need to do to fit an MTB crankset and chainring?
You just need to find a bb that will accept whatever spindle size you want to put on. And make sure the chainline is good too.
@@ianbirkettactionmedia412 I've just decided to keep as is and ordering a profile 36t chainring instead. It was the lack of speed that was the issue 👍
How much did you pay for the bike stock without anything else put on it
Literally bought one 2 months ago just installed a fox 36 on it. Nice vid
Thanks! How you like the 36 so far?
You said retarded
Nice I run run Profile cranks on my mountain bike
9/16" pedals
Nice! I just picked up mine not that long ago. I installed a 170mm Lyrik on my Scout :D
Tnx bro
This is awesome, I come from a bmx background and have been wanting to put a tubular bmx crank on my mtb. What tooth width and chain size are you running, also will this work with a 10 speed cassette?
Awesome! Me too. I wouldn't put them on a trail / Enduro bike but on a dj, its amazing. Most modern bikes are coming that way also I think.
@@ianbirkettactionmedia412 where did you order the diety bottom bracket from?
Diety component's website had the kit. Unfortunately I'm not seeing it on the website anymore. Other company's make the same type of bb tho so if you can't find the diety one, then you may be able to find a other.
Octane one makes one as well
Good video man 🤙
Thanks. I hope it helps everyone in their mtb endeavors!
Where are your trails?
Love this place! Haven't tried a beer from them I didn't like!
Yeah it was pretty cool. Desperately need to go back.
I been on the prowl for one. I’m not having any luck. I need
A frame or a complete?
Either or
You check chaun reaction or the bike bondsman?
Great video bmx cranks is the way to go because they are sturdyer than aluminum. I am building a fixed gear freestyle, the only change I will do is that I need splined cranks and sprocket for heavy use and abuse . Thanks for the valuable information.
why does everyone think that trigger shifter is a good idea? If you use your pointer to shift then you have no finger covering brake.
Its a neat feature but the more seat time I get, I have noticed that I use it less.