วีดีโอ

Hi Martin I've s movano 2.5 58plste Campbeltown gone are they renown for any engine components damage or can I just retime & fit new timing kit and be lucky? Thanks in advance keep up your helpful videos.

How do you test a glow plug relay? Also can you put a battery charger wire to 4 glow plugs and earth will they glow? Plz

Nothing like having the right kit for job 👌

Such a shame how many cars get scraped due to this I have a Honda crv that my mechanic has been trying to get the injector out for over 8 weeks to try and save me monies what a star !!

You can't use that method on most modern engines with plastic intakes and plastic Cam covers . For future reference ⚠️Loctite 8151⚠️ Have you tried it ? Stupid design some of these glow plug and injector heads. And if only the factory would use Loctite 8151 anti seize none of this would happen. I use it on aircraft engines on manifold nuts and studs and they always come out years down the line. 8151 good for 900C ✅️

Could you counter bore the hole that bolt ( thats fouling yr thru-ram on) is in and use a capscrew/in-hex screw in there instead) Ram should sit flat then. Like that tool tho. Will have to make one now.

Top bloke thanks very much

How do you remove the top plastic injector top cover . Pls

Nice video

WE CANT SEE.... NOTHING

Great video. Shame someone been at mine before and rounded off all the button head screws! 🤦🏽‍♂️

I’m about to remove turbo from 2014 2.0. I have complete spare on manifold but will Try to remove turbo from manifold on van first. Haven’t started yet but under the heater blower box there’s what looks like an ally engine mount? Is this easy to remove? Thanks

Vivaro 2005,,1.9cdti,, glowplug light came on while driving,, stopped ok,, now van wont start,,

Thank you, sir. Two of mine were 500k and 22.5k. Both need replacing I'm guessing.

What an excellent video , was going to struggle the hard way . Its going to be far more pleasant doing it the proper way and only 30mins . Thankyou

Top man I own a garage been mechanic all my days but learning daily many thanks 👍

Thank you for the reply ,I was going to buy one but needs a turbo ,£800 2010 van price

How much does that cost? Or for a turbo to get changed? Average price please sir if you can?

Thanks, great help 👍

I'm grateful to have found this video as I'm tinkering with my Nissan Kubistar 2008 (a model which pretty much is a Nissan-badged Kangoo). I have to ask you who seems to be a good mechanic and might know this. What is that drawn out beeping sound in the background?...if you go to 0:52 into the video it is clearly heard in the background, but it also sounds while you are talking about the relay. I have the same background noise on my car, and wonder where it is coming from. Do you think it is normal or is there something wrong when that sound is heard? The reason I ask is that the car can't seem to get rid of error code P0670 despite new glow plugs, im clearing the code but it comes back, and I'm starting to wonder if the noise has anything to do with the error.

Hi I’ve 380/670 and I’ve a solid immon light on dash I’ve no glow plug light / service light proper scratching my head I’ve had 3 auto electricians on it done earth checked wiring replaced fps doing regulator Monday but any hints would be appreciated .. also replaced glow plug relay from my other running vehicle cheers buddy

Great pair of videos. Some really fab advice. Defo helped to realise what has to be done.

Hello, are the wires of injectors coming from ECU to injectors positive or positive and negative electrodes? It has nothing to do with the negative (ground) motor pole. I have a Hino with a J07E 5-cylinder engine, I think the type of injector is from Denso, the engine does not work because the injectors do not secrete diesel (electric problem)

Hi Martin. Ive just got a vauxhall vivaro 2012 with 140k on the clock. The service history says the oil was changed evey 20k miles. I keep seeing videos of others saying rebew the timing chain. Others say is shoukd be fine. So do i get it changed or wait till i start hearing a rattle or poor engine power? Cheers

What will.melt in the sun?

Thanks mate mines a 16 plate I'll keep watching your videos you class brother 👍

What year is that van brother class video my friend

Is there any way of taking the actual bonnet off? For repairing/repraying purposes?

Thanks for this - just sealed mine prior to replacing MAF as had water ingress into my air filter box which I can other assume has caused P1010 MAF fault. Did notice rust around injectors but am hoping as they have been done recently they wont be an issues for a while yet.

Really helpful video thanks for posting it. Any advice on checking whether injectors are badly rusted from water ingress prior to purchasing a Vivaro? Going to look at 2008 with 119k. Thanks

Alright butti, changed plugs, changed relay, changed relay in fuze box still not working and light on on dash ?????

I have same faults but in addition engine is not starting. Is it possible that it is not starting because of those faults?

Can all your injectors go out at once?. I did what was shown here, and they all fall to zero.. what would cause your injectors to all go out at the same time?.. or is the testing procedure here wrong?.

Hi have you done a video on getting out the rusted injector clamp bolt!!

Genius

Is this the same for the mk1 2003 model bud?

Excellent video my no4 cylinder misfiring now due to water ingress will be doing this straight away

Thank you for sharing with us.

Hi I have the 2016 1.6 traffic with the engine light on and the code reader is saying glow plug circuit A I’ve replaced the plugs and changed the relay but the engine light still comes on have you got any ideas please

Just done mine today using this video, thanks for the help. Something I didn’t notice until I got into it is that the air box is already off in this video. You can do the scuttle seal with the air box still on but there’s 1 more 10mm bolt to undo between the air box and scuttle not shown here and you’ll also have less room to work and get the wiper motor out.

Took your advice and went to a recommended garage with diagnostic gizmo.seemingly glow plug relay i put in (new) was faulty. e bay special! Replaced it with a proper one for a dacia duster a lot more expensive but was worth it no more limp mode or lights oon dashboard .once again thankyou.

Great step by step video. I shall be doing mine soon 👍

Great video, my 2.0 vivaro with Renault engine has been getting a glow plug and spanner light coming on. Fault code reader says it's a turbo fault and this fault comes on with low revs, for instance driving in 6th gear just under 2000 revs. If i keep the revs high then the fault doesn't come up. So it sounds to me that the turbo fans are struggling to spin at low rpm. Any advice would be great.

What’s a peejo?

I have a 2006 Renault Master 2.5 CDI, with an intermittent glow plug problem, I have changed the relay, I also noticed the light would come on when cold, but not when hot. The temperature gauge is not showing a hot temperature, when you turn on the ignition when the engine is hot, but the fuel gauge works. I changed the temperature sender, again, fine when cold, and temperature gauge reads fine once hot, but as soon as you turn off the ignition, and try to restart a hot engine, the gauge is not showing a temperature , glow plug light / relay won't work, if I unplug the hot sensor and plug in a cold sensor, it will work, any ideas please ?

Do you know is there any way to test the control unit? Thanks

I couldn't for the life of me get mine off. Then I realised there's one bolt near the drivers side that holds the cabin air filter thing to it. Once I'd got that off it came off easily. Very helpful video.

Excellent video, not a mechanic myself but I stripped down my Vivaro with ease following this video. I have another problem you my be able to advise on if you don't mind. My exhaust is smoking a little more than I think it should and is Smelly, I have just changed the oil and filter but no change, Any advice?

Awesome video. Thank you. I have this issue but wanting to have the relay before i start. If it is the cable I will re-solder it now also.

Another great video. Thanks. I replaced all my top hat nuts and the bolts with stainless, also used riv nuts and stainless bolts. Makes life much easier at the next strip down.