วีดีโอ

Sorry friend but your voice is so so so low but your music is loud🤔🤔🤔🇬🇧🇬🇧🇬🇧

I have one wire that came undone when changing the battery. Looks like for air compressor. Any videos on where to reattach

My cooling fan won't cut off

I had one of these and loved it,beware of fuel pump seal failing and leaking petrol into the engine.

How do you charge this battery charger? Lost the booklet.

This is a trash product. The buttons fall off and the light gets stuck on and won’t turn off

Thank you !!

Wow! How does a vehicle that new not have a cabin air filter? Is it only certain trim levels that has is?

I need to take the air bag out on my 03 L200 at some point and tighten the center bolt that holds the steering wheel on. I believe it's loose, because I have a lot of play up and down, left to right and it's not the tilt pins. Thank you for the info.

I don't know how but I got it out with my bare hands in about a minute. I basically peeled it like an onion. I came here looking for instructions because there were none!

So you mean to tell me that i was charged for a cabin filter change when they couldn't even access it 🤔 🙄

I have the same one and it doesn’t charge , I change the power adapter and only the screen flashes but doesn’t show the charge level , what can I check…? Thanks…👍👍👍

i had a 1965 850 Spider. An Abarth version with 1000 cc engine was later available for more power. Loved the car but more power would have been great. I bought mine with a beautiful mauve paint job. Great italian design. The 1965 model had smooth rounded Porsche style headlights. A beauty!

Thank you!!!! I just got gifted a buick enclave but it had a massive mouse nest in the cavity under the windshield wipers. I got that out and have been using pet pee neutralizing spray but the car is designed to have a nice ledge "bathroom" right at the intake for the outside air. (nightmare) I wish the engineer who allowed a mouse sized hole in the design of this car had to come clean this mess up. This video will allow me to get deeper inside and spray some more. ugh...

I’m looking for an air compressor replacement/repair video for one of these.

Great video and thanks for not adding any goofy music to it

lets talk about that crack in the dash. I can't take my eyse off it. LOL

that button isnt working on mine. i see why people end up pushing them too hard.

I carburatori vanno smontati e ripuliti prima di mettere in moto motori fermi da decenni, perche' nelle vaschette si accumula sporco che ostruiscono i getti del carburatore. Hai montato il Filtro Benzina all'incontrario !!

I overcharged it maybe for some days and it now beeps randomly and the LED light comes on I have to turn it off otherwise the led remains on so is there a way to fix this or just let it run outa juice

Not to sound like an A-hole. Why didn't you remove the tailgate to make it easier to get the wire to the bottom, you could have even drilled a larger hole or increased the existing one? Just my 2 cents. Thanks.

Primo Restoration and Repair, This is amazing! I subscribed right away!

Love the Studebakers, awesome job Sir.

Easily the worst brand to ever exist.

My traverse is like this too how stupid

Unfortunately, this got left out in the rain. We dried it out but now it won't turn off. It appears that everything else works fine. I couldn't find a reset button. Any suggestions?

I'm just trying to fix this error in front of my car and this is a 21 minute video?! Ridiculous.

Thanks!

Good video, what radio do you have in this video?

Mine done the same thing man

Have you repaired one that doesn't take a charge anymore?

Good video fixed mine also took out air compressor nylon gear stripped out in hub first use

Bella auto bellezza senza tempo

Several guys are having same issue mine has. Charges up, let it sit and after a few days to a week it’s lost enough juice to not function. Has anyone fixed this and have advice? Thanks

Mine wont hold a charge how do it fix it? And is there a way to turn it off i feel like i always waited for it to turn off

I'm still trying to discover what battery they chose for these, I don't want to spend a bunch of money on another underpowered weak jump box.

I bought one of those in March along with a Everstart 400w inverter to charge it back up when driving my car. Worked swell until September when the jump start feature stopped working. Button was intact but the screen stayed blank when the cables were connected. If I connected the cables after the engine started, the screen would light up showing the cable icons and the jumper battery level of charge. Walmart wouldn't do an exchange or refund since 90 days had passed. I called Everstart customer service where an older American woman said I screwed up the battery by using an 110v inverter to charge it. Told her that the battery was fine and the problem was with the internal circuit board. She said I ship it to them for testing but would need to pay the postage both ways, which was $90. Asked if they can repair the circuit boards there only to be told they'll only test the battery. I hung up and began draining the battery down to 7.5v a few times between charging back up to 14v. Did that 3 times and now the screen lights up to show the charge when pressing the jump start button. Still doesn't show the cable icons nor will the jump feature work. I've been charging it while showing a full charge of 12.8v since it'll rise up to 13.2v within a minute and get up to 14v after 15 to 20 minutes. Plan to keep that up it reaches 40 hours of charge time (have logged 17 so far). Am curious to see if that brings up the CCA level the circuitry requires to kick on the jump start feature. If it doesn't, then I'll figure out how to bypass the button to have constant power to the cables. Wish I could obtain the circuit diagram for this thing.

Hola. La función de inversor no enciende y no carga varias. Que puedo hacer?

Actually a unmaintained distributor was often the end for those cars. If maintained these were nice running and reliable cars. The lightness of them serves the handling is great for cruising on b or c roads. You have to remember it's not a modern car but a design from the 60's. Congrats for that car you won't find anything like that today, everything is a heavy truck compared to this beauty.

I brought my 2010 to Valvoline for an oil change and as an optional service they offered changing the cabin filter. They spent an hour trying to figure it when it doesn’t even have one! 😂😂😂😂😂😂 They finally suggested taking it to the dealer. That’s gonna be a fun story to tell them the next time I bring it in!

Took me two hours to get it out of the container 😡😡

I have the same model. When attempting to use the AC inverter, I'm seeing a "fault icon" on the screen. I can't find anything on the internet to help me diagnose what might be wrong. Purchased at Walmart, not sure who to contact. Any advice?

Midwest Bayless in Columbus Ohio has a good number of parts, both new and used. SWAP? SUbaru.

can i overcharge this device? does it cut off automatically when its fully charged?

I bought this camera as well but I’m having issues installing it on my 15’ Camaro.

Thank you had the same problem with my 2010 it had no Trey so I had to cut it out but thank you much

I have recently inherited a bunch Studebaker parts and cars, a 48 Class M pickup. Mine has been highly customized. I would love to see any videos of your truck so that I can see what is still original on mine. I have 1 question is how tight is your turning radius? Mine is appears to very high. Truck was my Father in-laws and I heard it run for the first and he had it for over 10 years.

Peugeot used those carbs, replacements are available beyond rebuild kits.And that rear engine platform,new replacement structural sheet metal are still out there,as the Soviets built more than one economy car off that platform. Think SEAT built a vehicle off that platform also, with new replacement sheet metal out there.

Sadly soon all gas cars will be illegal in USA and EU!

I have one in my garage right now. 1970 Fiat 850 Sport. Purchased in 1983 after I got out of the Navy. Twenty years ago, lot of parts available for them, not so much now. Be careful with the carburetor. It is a Weber 30 DICA. They only used these about three years only on this car. You can get re-build kit, but you cannot purchase the carburetor.