วีดีโอ

hi, its possible to install rear and lateral fans in K1 SE in order to print abs?, I can install custom panels and door easy but need to know if the printer comes with cables for the fans or at least theres place to plug them like the camera

Can the heat be adjusted on this model?

Hi. Do you still recommend the iCube 10W or is this a far better machine?

Comes with 4 squares of double sided tape to secure the light

Adding actually engraved test guidance is a good idea.

Great video , purchased the K1 Speedy just over a month ago, the Speedy & SE are the same price in the UK (£339),. Mine came with the new version 3 extruder, ceramic hot end & hardened steel nozzle (Unicorn, I think ?). Upgraded with the camera, which I think makes it almost a K1C, apart from the carbon filter & the smaller X/Y axis pulley gears that are fitted on the K1C. The C has these to improve the VFAs & ghosting of the early K1s?

Just commented on your z offset video; my stock extrusion was ~92mm with E steps set at 405. Ended up with it at 448 to get the full 100mm. My Max does have a 'semi-'direct drive mod with the extruder about an inch above the entrance to the hotend. I never checked E steps before the mod, so I don't know if that change had any effect.

I m sorry but you dont know to explain clearly what you are doing there.

Any idea whether this firmware (or the later versions now available) will allow seeing and adjusting E steps from the control pad? It's not at all convenient to get a usb cable from computer to printer for pronterface. Failing that, do you know the 'stock' E steps setting in the firmware? Mine seems to be under-extruding by about 3-4% (3mm over 100mm extrusion) using a gcode file found online, but I have no idea what number to start with to adjust it using the 'card' method to run the gcodes. Thanks!

Hello, I have a problem with version zombieV2, it is impossible to change the filament during printing to pause the printer.

Does this work on the anycubic kobra printer?

Creativity customer service will give you and STL file for a cover that fits their extruder, but you have to email them directly....

On my K1C, both screw holes on the right side of the extruder (the side with two screws) for attaching the extruder assembly into the print head do not align properly. The holes in the extruder are slightly higher than the holes in the print head mount. You must push very firmly on the top of the extruder before the screws will catch and thread in. This is not the case with the stock extruder - it just pivots into place and the screws thread without issues. Also, the K1C does not have the extra bit of Bowden tube between the extruder and the print head. There is a built in metal tube that serves that purpose.

Dark black? its just black

Very helpful, thanks so much!

When you did the self check when it went to input shaping did it make a really loud noise and start vibrating because mine did I was afraid I was going to mess something up

What sort of interface does the laser module have as you can get a 20watt module for £200 from the elegoo site.If it has pwm/ttl that would be an amazing upgrade for my cnc

A surprisingly compact machine!

Does it have double espresso function?

Ahhhhh, I printed the same AMS riser. I added little foam strips to the glass tabs to keep it from wanting to shake out or accidentally shattering.

No files found on the ****/3dpuk website; have they moved?

Do you consider this k1 se printer a reliable printer? I could get k1 SE for like 315 usd vs the bambu a1 for 375 (im from mexico, those are the current prices) i decided to go for the k1SE. I do like a lot more the idea of a core xy printer for even cheaper but im worried cuz this is would be my first printer and i've heard creality has a lot of quality control issues while bambulab is just easy printing. I do like tinkering and learning from fixing things since im in the custom built pcs hobby i just dont want something that makes me not wanting to use it cuz everytime there is something going wrong, i do consider i learn really fast and i have a decent amount of hardware and electronics knowledge cuz the pc hobby i mentioned before but i dont know anything about 3d printing ant this is my journey start. What are your thoughts on these, would you consider i should be fine with the k1 SE?

I replaced my stock extruder on my one-year-old K1 Max. I adjusted it as I printed a 15-minute benchy at full speed with regular PLA and it was better than the first one. No stringing and perfect layers!

I can't find nozzles for kobra max, just for kobra 2 max... Are they the same ?? Pls help

i have 2 of these, warm up lovely, but where does the moisture go ?

Looks neat and does the job!

I'm here in 2024 with a kobra 2 neo that needs to be lubricated and I just learned how from this video. 😊 What about greasing the linear rails?

Only video I have found showing how to change the filament, thank you!!

I am sure you are aware but just in case. Plugging both light strips in exceeds the recommended draw on the light bar connector. That is according to Bigtreetech. No idea what this might mean lol.

Good video, but did you have to pay import tax, did it come from the US to the UK?

I got the problem but with the outside ones

Dont Buy this shit machine, gears broke after less then a month printing among other problems NOt worth the high price, quality is really Chinese. If you buy just order steel gears or better extruder right away and count that into the price of buying a K1 Max in eu thats about $750-1000 + $100 for upgrading. BETTER they just ship the K1 without extruder and let one buy a 3 party extruder right away to cut the price of the machine!

I have troubles with printing tpu with the k1c. 90a is the tpu i wnat to print but its to soft i guess. Any advise?

Its not about its size, its what you do with it eh! Phil!

Was actually surprised that it wasn’t a galvo for its size. Having it a gantry, reducing the overall engraving area. Thanks for the review 👍

Thank you that works for mine. Just rubbing the be helped.

Excellent review - really clear instructions - thank you

I'm looking forward to the modifications because I'm also considering buying it and upgrading it to version 1c in the future. And please do the benchy test again because this one looks terrible.

How about its noise level in general, and how it compares in this regard to K1C?

Can it be used for Ender 3 V3 Plus?

Good video. What alternative unit's you know with similar enclosed 5/10W in budget level which can be used instead?

Excellent was beginning to despair of delonghi videos!

Crazy because I bought mine maybe a year ago. Maybe he shutdown. I printed everything out but need to put together but I would rather use Klipper.

Do you need any software changes?

Elegoo is having a huge sale on resin. Check it out!

Really great video of your hand but I wish you showed us the prints

Link for the side panels?

I just got mine a few days ago and absolutely love it! So many features, access to the printer from anywhere (Coming from a Neptune 3 Pro) and a heck of a deal going on now too. No taxes, free shipping and free gift.

👍👍👍awesome video

Voronoi Skull in Rainbow PLA - lovely print!