วีดีโอ

Has your AC system held up for the past year. I'm really nervous about buying a cheap ac compressor and condensor. I have seen nothing but bad reviews except for the 700$ compressor

The throttle hangs because "follow" is on. Make sure you turn it off before you do the learning setup. Also don't let go of the throttle until the controller beeps at you when you're doing the learn. I have a feeling one of your hall sensor wires is crossed or something. I have that same type of motor and controller and it works fine.

I like that you cut out the back of the cd bin to shove the wires back there. I wish you had showed the final wire hookup though. I don't actually know where the large 3018 plug goes. There seems to be just the one plug that was in that location where your hand is at 16:10, but I'm not certain if that's the case or not. What bugs me is that there is no instruction nor pictures of where to plug in the 3018 harness in any of their installation guides; or at least not the ones provided by Crutchfield from Metra. And, I've watched three videos and nobody is showing that part. I know ; it's obvious once you've done it. Thanks for any otherwise excellent video.

I followed your directions but I'm not running a SWC. My unit still stays powered on. Any idea?

Go QS motor bro!

I can’t watch the video at the moment so sorry if you answered this in the video but is there any other microphones I can use like a wire in one

Doesn't show how to install without a hub. Not quite the ultimate beginners guide.

Smartthings matter integration for Lock pro was a bit difficult but eventually worked for me, try the second method of adding matter using code from the settings instead of scanning the matter QR. Now that matter is integrated works flawlessly and makes me want more of Switchbot like these curtain motors

Controller is simply tuned incorrectly by Kunray. Razor guys have that combination (not from Kunray) going 45+mph. Find Ryan Goodyear for all FarDriver Tuning needs. He admins the FarDriver Tuning for Ebikes group. Kunray needs to stick to motors only.

Great video, thank you! Please share a link to the “magic box”, I could not find it on Amazon.

Great vid. Thank you

can you replace the compressor without replacing the condenser if the condenser is fine?

Holy hell I just went through this again!!! Yes again. I lost my holiday weekend. I had it working, with snmp wan monitors and everything. Then something went wrong. Three days lost! I just can’t anymore. This is my third shot. They are out!

Yeah

Your voice and inflection is extremely similar to the late Grant Thompson from "The King of Random" YT channel. Excellent video btw, I recently acquired a similar quad for my son with the 4 stroke chinese 110cc engine and 3 speed semiautomatic transmission, I rode it myself and had the time of my life. Subscribed

Built that same kit into a razor bike. Those controllers are so garbage. Do yourself a favor and buy the electro and co Kelley KVD. I don’t regret that buy at all but I did melt the motor by overheating it with too many amps. So get a heat sink too lol

Build a weather proof enclosure for the motor…

I genuinely thought this was just another big TH-cam channel's video, but it turns out it wasn't... The production quality tricked me - good job! I'm certain that if you keep up with the upload schedule, you'll one day do this full-time and get sponsors you never could've dreamed of.

keep it up man!

what you can do with the automation interface in HA (pure gui no script) is WAY more powerful, easy and clear than any samsung or google or apple interface... try again home assistant, it never failed me

Hope this was fun, I'm new to #Shorts ⚙️ Full Send and Build Guide on my channel - Thanks for watching! 🤟

Hope you had fun with this one!

SUPER EXCITED TO SHARE THIS ONE WITH YOU ALL! LET ME KNOW WHAT YOU THINK!

would have been nice had you shown how to install this on a back tab top curtain.

Thank for the guide. I just had to see someone do it before it clicked in my head on what I needed to do for the wiring. It's really not that hard.

Anybody knows how much oil does ac compresor takes ?

Oh thank you I just got lost in the deepest of rabbit holes where everyone and their mom praises home assistant. I have no idea what "code" even is but you saved me

Thank You👍

I'm a former Hubitat user myself and I switched to home assistant 2 years ago. I would have done the same if I were on smartthings. You're not wrong, it takes a while longer to get into the .yaml vibe opposed to the out of the box gui modes of the other systems. Although HA is catching up. For me the reason to change is hardware reliability. For smartthings and hubitat I'd have to have a spare hub lying around the house in case of a HW failure, or face a lot of downtime due to unavailability or delivery or... In case of home assistant, I can be up and running on a VM in an hour or 2 while I wait for my new dedicated hardware to arrive. For me that is the most important thing.

HP's Omen is seriously handicapped by its case design. Reducing cpu clock speed and voltage can help drop cpu temp 15-20* C, but you give up part of the reason that you made the purchase to begin with. (Mine dropped from mid-high 70s down to mid 50s while idling or with a couple tabs open at the same time.) I haven't swapped out the stock air/heatsink cooler yet, but will try a Corsair AIO soon. If that doesn't make big difference, I'll at least install a 120 exhaust fan in the top like in this video, and add one in the bottom to draw air into the case.

Stereo or not? the usb-c/trs adapter (Boya or other) on the Action 4 if connect a stereo microphone?

Use HDMI ports 2 and 4 they run native 120hz better for some reason than HDMI ports 1 and 3 this has been stated by Phillips that these HDMI ports run 120hz better if anyone is having issues with the HUE box.

So every time you load in a game it turns off ?

I bet your wife made you do this video 😂 😢

Doesn’t show you how to install

Do you know if I’ll be able to use a 52v 28.8ah battery on a 48v 1500w kit that uses a 48v controller? or will it cause any damage as I’ve seen people use similar setups to this and it seems ok to run.👍

Do you think this kit would work on an Eahora Juliet?

Where are you based? I would literally LOVE to pay you to do this for me.

Do you recommend changing the AC expansion valve too?

Wish I would’ve seen this vid when it came out. Can’t find any of the splitters in any of these how to videos.

How fast you get with this build?

I abandoned Home Assistant because it's a labyrinth inside of a rabbit hole. User guides provide too many options and of the additional apps, excuse me, integrations, or is it services, VS, JSON, YAML, Docker, Debian..... wait, where was I and why do I have 5 browsers open with 25 tabs each, and why......

thank you so very much for this video, it helped me a lot!

Thanks for this!!! Awesome testing and review.... Pro level quality on the edit too. Used your links to pick up a few things!

calling this a vehicle can cost you in a court.

Z-wave was really easy to install and integrate

Hi, if I have the Samsung S90C and I have Ambivision Pro already. it has some issues that the support doesn't answer after 1 month and disappear again. if I want 4 Zones sides+Top+buttom with Philips Hue to PC using 4K144, what do I need to get? I still need the White box right? how many Play Hue do i need to buy, 2 boxes?

cool, but is more hard

Is there a list of which devices work locally with something like smartthings? I'm currently using google home, and thinking about moving to homekit or something else for more local options