วีดีโอ

Thank you Sir. Handle is made out od beech wood.

Thanks

Thank you, I'm glad you like the video. Cheers

Puno hvala! Drago mi je da Vam se sviđa video.

Thank you

Thank you for watching, and for the advice.

I know.... :))

Thank you Sir. Well, I get my spare parts from official Stihl dealers, so I would recommend for you to do the same. Overall, these small Stihl trimmers are generally not the best quality in the first place, so I don't think that the origin of the spare parts matter that much.

Yes

Thanks Ryan, I'm glad that you've found the video useful.

@@dsw.handcraft I noticed you didn't take out the idle screws when cleaning.

@@ryanvercoe1140 @Ryan Vercoe yeah, the inside of the carburettor was fairly clean, so I didn't mess with the jets, but it is a good practice to remove the jets if thorough cleaning is needed.

Thank you Sir, I'm glad that you've found my video useful

Thanks! ;)

No, it's Carb Cleaner.

Thank you sir, I'm glad that you found my video useful. Fluids used are: brake cleaner for removing the dirt from the outside, and carb cleaner for flushing all internal parts of the carburetor.

@@dsw.handcraft Thank you, stay well. 🙂

@@dsw.handcraft I'm a bit embarrassed; After watching your video I opened the plastic cover of the carburetor ...looked at and removed the air filter and the machine started right up. New air filter tomorrow. My thanks though because your video was the impetus to troubleshooting.

@@reidblackhall2520 There is no need to be embarrassed. Often we all overlook the simple things. I'm really glad that you've managed to fix your machine! Cheers!

You're welcome Sir! I'm glad that you've found my video useful.

If I remember correctly, it's a 10mm socket...

8mm !

Thank you, sir! I'm glad that you like it.

Thank you Sir, I'm glad that you like the video.

Puno hvala! Drago mi je da Vam se sviđa

@@dsw.handcraft Oprosti kad vec drvo ima nagib zasto se komplikuje sa ovakvim zarezivanjem?

@@ivanmatic1330 Objašnjeno je u opisu videa, ali pretpostavljam da niste pročitali... Ono što se vama čini nepotrebnom komplikacijom je zapravo ispravan pristup obaranju stabla sa jakim nagibom, jer takva stabla imaju tendenciju da se raspuknu po dužini ako se obaraju konvencionalnom tehnikom. Ukoliko dodje do raspucavanja debla, stablo u padu postaje nepredvidivo i takve situacije nerijetko završe sa ozbiljnim ozljedama sjekača, pa čak i smrtnim ishodima.

@@dsw.handcraft Hvala na objasnjenju, sad shvatam ovakav nacin zasecanja. Unutar drveta sa strane se ubada mac da bi se oslobodio pritiska da ne bi doslo do pucanja stabla kad se zadnji rez vrsi pri obaranju. Ja uvek idem veci klin vadim napred kod velikog drveta ako treba i dva klina.

@@ivanmatic1330 Hvala na gledanju videa ;)

Thank you very much Sir, I'm glad that you like it! Cheers

Yeah, that makes two of us :)) Thank you Sir for your positive feedback!

Puno hvala na pohvali i na gledanju videa! :)

Pozdrav, 2-taktni motori su nezahvalni po pitanju dijagnosticiranja kvarova, jer više različitih kvarova može uzrokovati potpuno iste simptome, te iz tog razloga izbjegavam ikakvu dijagnostiku ovako na slijepo. Imao sam sličan slučaj sa jednim FS38 trimerom kod kojega je problem bila nakupljena čađa na ispušnom "ventilu" (otvoru), pa se motor gušio sa vlastitim ispuhom. Slične simptome, između ostalog, može izazvati previše ili premalo goriva u cilindru (prebogata ili presiromašna smjesa) i niz drugih stvari. Na žalost, previše je faktora koje treba uzeti u obzir, da bih Vam na ovaj način mogao konkretno pomoći.

Kod gustih šuma nastojim napraviti dobar plan vezan za redoslijed rušenja stabala, tako da se uglavnom uvijek može nešto napravit po pitanju dostupnosti. Nekad je radna okolina bolja, nekad je lošija, ali taj potencijalni izazov je ujedno i dio ljepote rada u šumarstvu.

@@dsw.handcraft tako je,adrenalin daje draz.Sve najbolje,cuvaj se

Thank you very much sir!

Thank you Sir, I'm glad that you've liked it!

Opreza nikad dovoljno. Hvala na komentaru.

Hvala

Moze se osjetiti lijepi proljetni dan, ali nesigurnost sigurno ne. Bez obzira na zavidnu kolicinu iskustva u poslovima vezanim za sumarstvo koje posjedujem, faktor opreza je uvijek prisutan i to na potpuno svjesnoj bazi. Posto volim ovaj posao ne zelim riskirati potencijalnu ozljedu koja bi me sprijecila da se nastavim bavit sumarstvom. Sto se rezanja iznad glave tice, morate procitati opis videa; to bi trebalo razjasnit situaciju. U svakom slucaju, hvala na komentaru i gledanju videa! ;)

You're welcome ;)

It's a Landini 6870

@@dsw.handcraft is it reliable tractor.

It's an old tractor, with a fair amount of work hours on its back. I have it for 5 years now, and I didn't have any major issues. I believe it is reliable regarding the engine, as it has Perkins 4.236 engine, without the turbocharger. The gearbox is Italian made, so it could also be fairly reliable.

@@dsw.handcraft good to hear as I am thinking of buying a 1980s 4wd landini 70 to 80hp,💚⚪💛.

Ako se dobro sjecam, Zama karburator je bio u pitanju...

Thank you!

Koristim isključivo Husqvarna XP sintetičko ulje. Udio ulja u gorivu je 2%.

Thank you for your comment. I didn't include talking about my work in the video, because I think that the video is self explanatory. In fact, the video was never meant to be a tutorial, but an insight to these simple repairs that you can do yourself. If my channel grows someday, I will consider making detailed tutorials. Thank you for watching.

As I said, unfortunately I don't sell my items due to high shipping costs from my country. I wouldn't want for your trip to Alaska to be costing you a lot of money :) Better buy some really warm clothes :)) Stay safe, and welcome to the channel! ;)

I'm very pleased that you find my tool to your liking. Unfortunately I don't sell my items, because the shipping costs from my country would be too high. Thank you for the inquiry!