วีดีโอ

I need one ,how to give order dork disc?

This was so helpful! Mine didn't come with a manual, or someone here at the house trhew it away. Your video saved me from stressing out about it! Thank you

broo that's not how you cut the ham

How much the family size

this is painful

maybe some silicone lubricant might've help? And maybe put the rubber boot in a tub of hot water as well.

Good job

Were do I get parts

Hi , were did you get the dust cover from ? Many thanks Scott .

People are horrified 😂😂😂😂

Imagine doing this much efffort to replace the dork disc. Just please adjust the derailleur right then you will never have that problem again. No hate but derailleurs have a maximum and a minimum screw for a reason.

Thanks 🙏

A new one is tough! I used wire cutters to slice it in a couple of places like a pizza. Then I used long nose pliers to tear it off. The plastic won’t shatter unfortunately. It’s bendy so you just need to cut and pull apart.

I've been fighting with this thing untill I saw your video... a lifesaver! THANK YOU!

useful advice. Thanks!

me gustaria obtener una de esas

thanks for the video. For me the door do not close on one side completely, it stops a cm from closing all the way. Do you know which screw to adjust if even possible?

I bet you work for Chrysler 😂😂😂😂

I was having such trouble putting together my rebounder, so I went to You Tube and found your tutorial. I could not with all my might get the frame together. I was relieved when I saw that a man had trouble too. I tried pushing the third joint down with no luck. So I got it started and then put the joint on the floor and put pressure on the top. Yay! It worked. Now to the bungee. I went through college stretching canvas for my paintings as an art major, so maybe I can pull the bungee cord. I don't know, but will give it a try. I need to rebound as it's good for circulation and the heart. Anyway, thank you.

Chain whip works on the sprockets to hold them from turning for disassembly.

Thanks

I thought it could be repaired, bit I guess it had to be replaced. Thanks for the helpful vid!

Thanks

One of the most frustrating repairs ever. The quick release exist for a very good reason

Got a brand new sub and it sounds like this.

thanks for making this video, if the company just explained how it works and its components there wouldnt be so much trouble

0:56 No, the washer is supposed to go *between* the wooden slats, not on the outside.

Great video. What style Kohler faucet is that ?

OMFG

You the man! Your video saved me hours. I did the reverse-it method and I used tire irons to help me lever up over the wider surfaces without damaging (I hope) the rubber. Thank you!

Excellant. Instruction. Smart. Precise. T Y

Watch this video on quick connects: th-cam.com/video/zEz_wQ0veQQ/w-d-xo.html. Find a way to push up against the white collett + twist/pull down on the braided hose.

Helpful video, clearly explained. My up shifter is stuck so I'm gonna give this a shot.

Can you help with the replacement hose? What is it called on Amazon?

Just purchased thanks for the review!

BTW, what brand of hinges is that? My kitchen cabinet hinges are all slowly going bad, and they look exactly like the model in your video, so I need to look for replacements

Thank you so much. Thanks to your video, I dared to open up my subwoofer. I was pleasantly surprised to find as the culprit a little toy action figure stuck in the speaker which one of our grandchildren must have put in the port in the front! LOL Problem solved!

Easy fix. NEVER BUY KOHLER PLUMBING PRODUCTS. ABSOLUTE JUNK!! They guarantee them for life, alright. A lifetime of misery. PP and Delta are better designed as well as being MUCH easier to service.

Fantastic video! Saved my whole night after trying for hours to remove the collet while underneath the sink. Taking it out the top was the key! Thank you!!

You did it backwards, you can remove the fork from the head stick and install from the bottom instead of the top.

This was almost bike ASMR, very relaxing to watch. 🙂 Thank you. I wish proper spoke protectors were available in metal, like aluminium or titanium - I’d buy one in a heartbeat. May have to design one myself. The red-handled tool is called a chain whip, by the way. If I can also throw in a few suggestions, it’s best to add and spread a dab of grease to the quick release skewer instead of WD-40: it will stay on better and longer inside the axle, making sure it doesn’t rust or get stuck inside. Similarly, when you’re re-inserting the rear wheel, it’s often a good idea to take the frame off the stand and let the bike’s natural weight rest on the wheel when you’re clamping down the quick release handle. This makes sure that the wheel sits well in the dropouts and that you won’t get alignment issues. This is not a big issue with rim brakes, but if you have disc brakes, they can end up rubbing otherwise. 👍

👏 Promo sm

Thank you!

Wow! Smart!

Kumusta na Mario?

Nice!

Love it thanks ❤ I'd rather watch a difficult video. Because all DIY jobs end up hard 😂

How do you measure for the new handle and lock?

About 7 months ago I bought some, but there is a lot of noise, they do not block the noise, I will have to buy others from another brand.

Put in an oven??? 😂😂😂😂😂