วีดีโอ

How you get the ikamper up? Those things are so heavy

Great video! Do you a list on the parts you used minus the switch pro😂

Quick Fist - WTF kind of company doesn't provide hardware?! No thanks.

4k and you have to assemble it yourself..damn

Awesome video when you wired it to your switch panel did you put it on a 30 amp fuse, I’m doing the same thing but not sure what fuse to run the lights on I’m running 4 together and 2 separate just like you did. If you or anyone could let me know I would appreciate it

Is it water proof? Looks great, thanks for the video.

Where did you buy the wire? Is it GXL rated?

🔥🔥🔥🔥

To anybody reading this, please do not ever splice that way...that solder job is a hack and could start a vehicle fire. There are much better ways to prevent voltage drop. 14 gauge is good for up to 10ft at 10 amps. These draw like 6.5? Just run the wires all the way back to the light controller. All 6 together will not exceed 40 amps. If you run everything back and splice within 1 foot of the power/relay/controller, you won't even need larger wire due to the incredibly short run (very little voltage drop/heat build up). Also, please use a solder sleeve (best) or crimp butt (good) for your splices, and splice 2 or 3 max into 1, and do than twice. Then if those 2 wires don’t fit into your connector/power distribution system, then splice again into a single wire if needed. 6 into 1 is a horrible idea, and if your solder connection is not good enough you can get hot spots due to the current which can and have started vehicle fires in the past. Cool video, educate yourself on how to build harnesses!

Thanks for the coupon code. However, when purchasing the 2 pack, it’s only giving me a discount of $4.50. 😢 That’s only 1% off the price. I was ready to pull the trigger on this because it has a coupon but for $4.50 discount, I backed out of the check out. Thanks though!

Will it fit in a standard garage

This is a much safer way to camp verses a tent on the ground. Last time I went camping I thought I heard a bear sniffing around my tent at night and I almost crapped myself from fear.

Hey man Ik this video is 2 years old but I wanted to give you a few tips on what I do. I use a hot knife to cut the braided loom although your lighter trick works. I also like to cut a small piece of heat shrink for both sides of the loom to secure it and make sure it wont fray.

Looks very spacious!

I’ve watched a lot of videos on this tent and this was one of the best! Cool to see everything being set up for the first time. Nice job 🎉

Very clean build. Not sure if you mentioned it, but is the mounting tray custom built for the components you put on it?

I cont connect to the app

That looks like a giant pain in the ass. Strong work

Nice short review! Straight to the point!

Do they not sell the mounting trays anymore? Can't find them on the website

About to pull the trigger on a new Water Tank. What are your thoughts on the water tank now that you’ve had it for over six months? Any issues or concerns? I’m debating on the 7 or 5 gallon. Because of weight concerns, I’m leaning towards the 5 gallon. Ideally, I’d like to have a 7 gallon but my roof rails are rated for 165lbs and with my RTT, I’ll be just over the weight limit when the tank is full.

They not have my color, electric lime

Man that’s an expensive Bluetooth lightbulb. But what’s not expensive these days. Hopefully in one more week that will all change. Great review

Thanks for this... I'm getting ready to set up my own wiring harness and this was really helpful! Those 6 LP6' look sweet and really light up the road.

You can put in everything car?

Have you tried the motion detector accessory out yet?

As long as u slow down during deer mating season u should be ok...2 many idiots speeding while deer mating season is in play..its like they for get theirs a hazard

No way... the cucksters can have the gen 4.

Scott, why did you say Jeep so fast? 30:46

What a great informational video. Looking forward to seeing the 4gen transformation. 3rd gen will be missed.

What a great informational video. Looking forward to seeing the 4gen transformation. 3rd gen will be missed.

What a great informational video. Looking forward to seeing the 4gen transformation. 3rd gen will be missed.

What a great informational video. Looking forward to seeing the 4gen transformation. 3rd gen will be missed.

Thats lot of wind noise on the road.

See you at the dealership fixing all those recalls 😂

Hell nah lol

kinda like just the outside lights on.

Nope, olny going diesel after the 3rd gen

I would kept the 3rd gen tacoma a bit longer. That rig has a lot of life and character. This new 4banger battery pack is just a ticking time bomb. Literally hundreds of things that can break in any car, but this one more than others.

NO EFIN WAY I would never get a 4X4 truck with a 4cylinder, but the truck looks sick you did a great job on it I just can't justify the money for a truck with a 4cylinder in it you will never see one in my garage God you did a great job

3rd gen looks iconic while 4th gen looks sharp. Cant wait to see the 4th be pushed to its limit.

I'm excited too see all the mods coming!!

Well done guys. Can't wait to see this thing built up @campygilmore style.

Can’t wait to show you all what’s in store! Scott, you nailed this video! I won’t lie, some of the b roll and talking about memories made me a bit emotional. Can’t wait to build new memories in the new camp-mobile with you!

I have almost 124,000 miles on my 2024 4Runner & I was today years old when I learned I didn't have to put it in reverse to turn on the camera, I always thought there should be a thumb switch on the shifter, but that will work too!! Color change is a bonus.

Thank you for this video. I was wondering how the heck you tighten the coupling to the compressor. Didn’t think about using a real wide screwdriver there. Getting my arb twin onboard finished up on my 4Runner.

Lmao you can make this easy for sub $100 😂

looks like you put the solid red in the middle which is number 2 and yellow red to number 3 or it doesn't matter?

if i have a 49" wide rack and a RTT, will there be room to mount this?

I have the victory 4x4 blitz hybrid bumper and thinking of getting this bumper with full headlight hoops. I have the winch relocation box bracket already so all I really need to do is unhook power cables, move the winch and lights to the new bumper, cut the fenders, and install. Done. I was looking and the hybrid version of this bumper but that doesn't offer any protection for the headlights. $380 for the caps though painted is a bit steep and since I already threw out the black part of my OEM bumper, I rather just cut it anyways since I cant sell it like that anyways plus the paint matches so il put that $380 towards a dermal tool instead....