วีดีโอ

Any videos of you driving around?

You need to cross the chain

Is that 3/8 ID? What ID did you use ?

how much is for this item sir?

I watched about 10 videos and still can't picture how it works. Thanks for explaining it well. The arm does the lifting when set right. your example about the wheelbarrow help out alot thanks again.

Ok so maybe a stupid question but how can you determine how many spacers are used to get a correct preload .. our kit came with 7 I have read there is a certain degree you want after you have found your ball height

Just bought a travel trailer. Every video I watch helps. Thanks.

GM new the condenser wouldn’t fail until after 60k miles

Turns it white to me.

I have ordered more than two or three items from BCA, in the past, and have defended their products online. Just called to check on the status of an order for a single barrel due to the delay in shipping. The sales rep said up to 14 days to even ship a single barrel FedEx. When I asked if it would be cheaper to just cancel my order and go to a store and get a barrel, he agreed. $78.00 barrel, $25.00 shipping. and up to 14 days to even ship. I have defended BCA more than once, but now??? I complained, and they now have canceled the order, The barres is no longer in stock amazing. BCA responded that the barrel had gone out of stock after my order,. Imagine that, Isn't it amazing how it went out of stock immediately after i complained, yet not 30 minutes before complained and not an hour after it was still showing available. Imagine that. Oh, and they have refunded my payment, might receive it within the next week. Now that is great customer service if I ever saw it.

Seems to be a lot of confusion out there about cleaning aluminum boats. There are two basic situations people are conflating. Removing dirt, scuffs, oil and waterline staining, and removing overall OXIDIZATION. This cleaner works great on the former but it doesn't remove the dull and uneven greying caused by oxidization over time. Nothing short of abrasive compounds and elbow grease can do the latter.

Thank you for making this video and making it easy to understand how to do this

Nice welder. I am a beginner. I clicked on the video because I saw the HOBART. I am using one at work, it's a different model, but looks identical to yours. The machine is solid and easy to use. I am considering buying this welder for my own personal use. Good video, thanks a bunch.👍

I'm just seeing this on 11/29/23. I have several bBCA uppers my 1st one was a 350 Legend. I had to change magazines to DuraMag. It now works great. I have a Hunting Partner that has to have the Best of everything. He hates it when I out shoot his 1500.oo AR.

Hey man I just picked a used car trailer and the trailer tire have some camber while hard turning on uneven terrain with a load. Is this “normal” for a tandem axle? Or are my axles bent? Otherwise the tire drive straight down the road with and without a load. Any help would be appreciated

I’ve used similar products to great effect. My only suggestion would be to get your truck (or other painted surfaces) away from the boat before spraying the product on. I’m not comfortable that the chemical wouldn’t damage my truck paint.

They are a great idea, but they are not a be all and end all solution. I had them on a caravan I used to own. Reduces the sway. But there are indeed other things you need to do. I had pneumatic shockers too, which helped a bit too. Anything to help reduce the sway to keep the misses and kids in the car, I put on the car. Once all that stuff is done, it's up to the nut behind the wheel (the driver). Even weight distribution inside the van helps. One just wants to get from A to B without any dramas. If you encounter different roads surfaces, different situations arise. Yep the levellers will help. Your grey matter has to do the rest.

I didn’t think about jacking up the trailer after attaching it to the truck hitch. You’re brilliant! 😂 locking the chain into the brackets by myself is quite an ordeal… not any more!

Yes replace the ground lead and clamp good ones I weld it with gas. Put a 3/4 heater hose 3 in.cut down the hose tied with zip ties this keeps the wire straight out of the machine use .030 wire mine welds and welds

im curious how much more force it would take with more components installed, like say you drive 100 miles and check it/set it again after its settled, rather than tear the whole thing down maybe just pop the tierods off, but the extra weight of the callipers and rotor plus the resistance of the ujoint in the axle etc

Go Trump

Ty

I see 2 brass bolts on the top, which one do I takeout the right or left?

I hate the swirl cut flash hiders as I usually plug the bottom two ports of the straight cut ports to prevent the sand, dirt and dust from kicking up or getting a burn mark on my vehicle. I wish they'd stop putting these circus clown flash hiders on their firearms. The two that I have received already I've cut down to be simple thread protectors. Otherwise fine products for the price.

what rail is that?

Oh my gosh THANK YOU!!! The wheel barrow reference was an amazing way to explain how that works!!

Thanks man. This was a basic teachin!

no one mentions that the 210mvp weighs in at 80 pounds, a lot of metal in it. i put mine on wheels

Does it come with new o rings for the line hook back up

O rings

Don't the chains need to be crossed?

I bought 2 Uppers I'm not trippin, to me it's a good weapon too upgrade the BCG if you want to, atleast I have something in my price range too upgrade but for now its all good BCA 👍 for $200-300 dollars in the price 💯no complaints here😎

Thank you for that video. I just bought a used travel trailer with that exact weight distribution hitch and have been having a hard time finding guidance on how to use it. Is the bar that you use to cam it over just round steel?

Isn't it always 3 links? 😂 No really tho... seems like every trailor I've hooked to every truck, dodge, ford, chev, weather its car hauler, camper, etc, 3 links is always the sweet spot... 😅

Great explanation. To the point and concise. Now here comes the ‘but’…. You should have your chains crossed

nice instructions, but I think three things you might reconsider. spring bars should be not more than level with the a frame,. safety chains should be crossed, and lastly the bolt on sway control needs to be released when backing up. great job with the instruction and why it's needed. take care from an old timer!

Thanks for sharing my man

Worth every Dollar 💰$$$$

I agree with you it is a good deal however it’s the best deal really we still got a upper for 200 bucks so who’s gonna complain?

That hitch system did come with a breaker bar, I guess your father in law left it on the bumper and never saw it again, that is why you crank it up high so you can hand set the chain otherwise with the bar its unnecessary to raise the trailer and truck to the maximum height and still have tension. purchase a after market bar, it will save time and work.

My new Aero Precision 300blk shoots supersonic fine, but is short cycling subsonics. Now i have a good set of tests to perform. Thsnk you!

Good video thanks!

Thanks simple and ez!

I still have my HF 170 .and other welders . Keep only flux core wire on it.pick it up used for 100 with helmet and cart. If its all you can afford get one It'll get the job done. There so many welder on the market now get wat you can afford

Appreciate all of the advice. Loading up tonight to haul out to Windrock tomorrow morning, about 8 hours away.

Thank you for the information I'm new to towing with my truck

Thank you for your time! great post and very informative. I'm new to towing a somewhat heavy trailer, you helped me out!

Which is accurate: I've had numerous brands of WD hitches, and all of them have emphasized that the torsion bars should be no closer to the camper's tongue than level, or parallel with the tongue. However, you mentioned in the video that the torsion bars need to be 'pointing up' towards the tongue (i.e. not parallel with the tongue), which indicates that the torsion bars are doing their job. Is this advice specific to this particular brand of WD hitch?

$800,000 that’s pretty steep, even for the dealer 🤣

Great video 📹 learned a lot 😊 Thanks