วีดีโอ

I have a similar model. How much did yours sell for?

You have the levels turned to half way. That why the signal was weak to the other equipment

This is one of the VERY BEST systems I've heard music through - go online and get instructions to first FULLY FACTORY RESET IT -- that is hold down the "Play/Pause" button before/AS you plug it in and wait for the color to turn orange blink - and THEN redownload the older Sonos App and follow app instructions. The Wifi connection will most probably show "No Internet" -- so a direct connection through ethernet is the way - unplug and plug in the unit after a minute or so, and then connect the ethernet (or other way around, makes no difference) - and then LIGHT WILL TURN GREEN - once that's done, system will update - THEN, it through the app, the unit must be connected to the router THROUGH WIFI - this should happen without issue. Once set up is complete, unplug unit power cable and ethernet, and it can be used in any room and will connect to router.

Hi friend. At the end of the Vinyl, This TT lift the needle?

I’ve found one just today in my house . It’s in beautiful condition tbh but got no vinyls and I won’t find my kind of music in india . So I may have to burn CDs on a pc to enjoy it .

I have this same machine and I love it. This machine has sensors built in that tell you when it’s not threaded correctly. It will sound off and stop the machine from sewing when it’s not threaded correctly. To thread correctly, remove the upper thread completely. Lift your presser foot up and leave it up so that it activates the tension discs correctly on the inside thread passage way inside machine. This sounds crazy but is absolutely necessary. Set needle in up position. Also necessary. With the spool of thread mounted on the spool pin and lying on its side level with the spool cap in place, use both hands and hold your thread, begin threading per the pathway diagram. On top of the machine, after you pass the thread under the hook shaped metal peg, use both hands and pass the thread under and around the semi half square plastic cover pathway while gently see-sawing the thread back and forth to seat the thread correctly into the tension discs. You will hear the thread lightly “click” into place. Then proceed threading machine down the front side of the machine doing the same at the bottom. Now carry thread through the little pig tail shaped wire at the front of the needle clamp. Pull gently on the thread to test it to ensure it’s threaded correctly. Thread should now dispense freely without a pulling or snagging feeling to it. Now thread the needle eye. Next using your cleaning brush, clean your bobbin case to make sure there is no dust or lint in it. Also don’t get oil inside it. You should only oil underneath it when needed. Drop in bobbin with its thread dispensing counter clockwise from the bobbin. Now move the thread tail through pathway as shown on the diagram making sure it lightly clicks into the notches as shown on the bobbin casing diagram. Following this procedure will prevent the sensors from sounding off. This process will absolutely stop the beeping sensor from sounding.

The machine stopping and beeping and flashing light is due to the machines built in sensor that tells you it’s not threaded correctly or the bobbin is not seated correctly.

Thanks for your video, helps tremendously, there is actually a small plastic plate between the speaker and the stand & screw (at least on my system) - have taken down and set-up my Acustimass 10 series IV several time, the set-up of the speakers with the floor stand is always a pain in the neck - wish Bose would have an easier set-up system.

I can't connect my phone with the cable, what should I do?

Why would you handle. Vinyl like thar. And just throw something on top of that.

Can you set up this TV without that remote can you use a universal sony remote or a app on your phone please let me know if it's possible to set up this TV without the remote it comes with please reply anybody

Probably the best Sony SACD made

Does it have aux in?

Did it thanks

Hi, how to change the bulb? That compartment is so congested. Pls help

With the Music search, you could hit rewind or FF and it would stop at the quiet space between songs. The auto repeat would rewind to beginning of tape and auto play the whole tape over again

U selling it?

Tip: Skip ahead to 2:45 to avoid needless info.

Sent you a text bud.

Worthless, is he even speaking English?

can I use a piece of Romex? does length and altitude help?

!! SOLD !!

Bravo........wood........that was a good old days......cheers

Why did u sell it, did u like the sound.

I got one open box from Best Buy for $125 with 4 year geek squad warranty. It works great and sounds even better!

Puedo conectarlo a mi teléfono con cable aux?

These are cool

Y si no tengo el control

Do you guys still have the charger?

I want to buy this

What are we listening to?

Can you use a regular sony dvd tv remote to control the Sony goggle tv

One of the best tube amps 👍🏻

I just bought one of these cassette decks for only $5 dollars.Yes i said $5 dollars.I replaced the belts and it plays and records great! These models normally have belt issues.Once you replace your belts and re greese up the cassette deck , that seems to fix any belt issues you might have.Overal a nice cassette deck in the long run.👍🏻🙂

How much did this board sell for?

Do you know how to connect the Sony tv to the home WiFi? Or were there any difficulties connecting your WiFi to your Sony tv?

Bad Caps you need service on this Carver TFM 4.0 this amp is 1989-1990 I bought mine bran new in 1990 for $900.00 and mine does not have noise your amp needs service has bad Capacitors! 30 year old amp!

Which way did you point the direct and diffused side?

Have you been able to update the operating system? TH-cam doesn't work for me, or Netflix, or anything.

I've had this amp (and pre-amp) since around 1988, it's a fantastic combination. And that 120 Watts is a real 120 Watts.

SOLD

My job has a Cx204 and a CX108V running on at least 10 jbl 12 inch woofers i don’t know about the specs on the processor but they’ve system sounds pretty better than the people i know who have thousand dollars of gear so with what I’m hearing infront of me you have to know what you’re doing and nice video i actually watch it a couple of times today

Do the radio dial lights also cut off when you switch to Phono and/or Tape Mon or is it just when you switch to Aux?

Thanks

Interesting 🤔 I have 2.2s and my drivers are on the angled part..

This video helped me understand these amps i just ran into 12 of these exact same model free

how much are these worth?

Thank You So Much!

Not a fan of the ADCOM flimsy plastic buttons.

It’s not connecting or syncing to my phone anymore. I’ve even tried direct Ethernet connection. Any advice?