![Chase Thomas](/img/default-banner.jpg)
- 43
- 9 840
Chase Thomas
United States
เข้าร่วมเมื่อ 22 มิ.ย. 2013
Mostly Dual Sport and ADV Motorcycle riding content.
Turaeg Major Service Part 7 Camtrain Reassembly
Putting the camtrain back together.
The additional parts you will need for this are
Intake camshaft fasteners (qty 2)
Screw M8X10 tork key
SKU: 1A013092
Cam Chain Tensioner Cap O-RING - 857176
SKU: 857176
Qty 1
OEM Aprilia Plain Washer With Gasket 1A020131 (ex 1A013737)
SKU: 1A020131
Qty 1
WASHER - 016661
SKU: 016661
Qty 1
All of ^ these part numbers can be found by searching that part number on AF1racing.com. Copy the part number and paste it into the search bar in the top right hand of their webpage.
Oetiker Clamp Kit for hoses (not all the clamps you need, but good assortment)
a.co/d/03ccDTXV
The additional parts you will need for this are
Intake camshaft fasteners (qty 2)
Screw M8X10 tork key
SKU: 1A013092
Cam Chain Tensioner Cap O-RING - 857176
SKU: 857176
Qty 1
OEM Aprilia Plain Washer With Gasket 1A020131 (ex 1A013737)
SKU: 1A020131
Qty 1
WASHER - 016661
SKU: 016661
Qty 1
All of ^ these part numbers can be found by searching that part number on AF1racing.com. Copy the part number and paste it into the search bar in the top right hand of their webpage.
Oetiker Clamp Kit for hoses (not all the clamps you need, but good assortment)
a.co/d/03ccDTXV
มุมมอง: 33
วีดีโอ
Tuareg Major Service Appendix A
มุมมอง 106วันที่ผ่านมา
Additional notes to the service. Intake Camshaft tool design ideas, how to find special sized hardened pins in the sizes you will need (according to the internet, pin sizes aren't verified by myself), and how to find extra long feeler gauges for reaching the intake cams. Feeler Gauges that I ordered : www.mcmaster.com/2066A7/
Aprilia Tuareg Major Service Part 6 Removing Cams
มุมมอง 13314 วันที่ผ่านมา
5 years later.. we finally remove the cam shafts.
Aprilia Tuareg Major Service Part 5 Pinning Out The Motor
มุมมอง 20314 วันที่ผ่านมา
How to pin out the motor and camshafts, most of this video is going over how you can use drill bits and how you can modify them to the right size... kind of a tangent video. You can skip over all of the drill bit modifying if you want to.. it's just me giving you an idea of how you could do it with tools you probably already have.
Aprilia Tuareg Major Service Part 4 Valve Access and Measuring
มุมมอง 9914 วันที่ผ่านมา
Some ideas on how to measure the valve clearances on the Tuareg.. what I've learned so far. We're getting into the more technical side of it in this video, so expect some rambling and bad math for the next few videos lol.. don't drink beer and do metric conversions in your head folks
Puppers
มุมมอง 1914 วันที่ผ่านมา
Awww, @YankiRides #apriliatuareg660 #tuareg660 #puppiesshorts #southgeorgia #adventureriding #short
Dougs Downhill Dare
มุมมอง 42หลายเดือนก่อน
Maple Springs Overlook downhill.. this should be easy to do with your hands on the handlebars, but the whole purpose of this is to lay a base line for a downhill course for people to do with NO HANDS on the handlebars.. I'll post another video with me trying it handless soon. It's a lot harder to do handless.
Aprilia Tuareg Major Service - Part 3 - Lots of Hose To Deal With
มุมมอง 199หลายเดือนก่อน
Taking the bike further apart.. but we're getting closer to the hard part
Aprilia Tuareg Major Service - Part 2 - Fairing Removal
มุมมอง 541หลายเดือนก่อน
Beginning of the work. Seat Removal, Battery Removal, Side Fairing Removal, Fuel Pump Line Disconnect, part of the gas tank removal
Aprilia Tuareg Major Service Part 1 - Introduction
มุมมอง 321หลายเดือนก่อน
An introduction to what is going on.
North Georgia Spring Day Ride - Aprilia Tuareg and Triumph Scrambler 1200
มุมมอง 1032 หลายเดือนก่อน
Myself on the Aprilia Tuareg and @rackhousemoto riding his Triumph Scrambler 1200. We were out for a little bit of fun on some of the North Georgia Forest Service Roads around Ellijay and Suches. Weather was great.. would have hated to miss it.
Not Supposed To Be Here
มุมมอง 2612 หลายเดือนก่อน
The Atlanta Track Club had something going on Fort Mountain this morning, but Murray County Sheriff Department didn't close the road for it, so I wound up getting into the thick of it lol.
Doug Does Audio?
มุมมอง 302 หลายเดือนก่อน
Come ride along while I test out my DJI MIC 2 and Osmo 4 setup to see how it sounds.
2024 Eclipse
มุมมอง 133 หลายเดือนก่อน
We got to experience the 2024 Solar Eclipse in Harrisburg, IL. We were right in the path of totality. Had a fun trip getting up there with some friends. This is a sped up video of the best part of the eclipse. Shot on an Insta360 X2.
How Does An Aprilia Tuareg Handle A Twisty Mountain Road?
มุมมอง 2686 หลายเดือนก่อน
How Does An Aprilia Tuareg Handle A Twisty Mountain Road?
WLHD Dirt Dayz - September 24th, 2023, Cherohala Skyway and Gravelhala
มุมมอง 909 หลายเดือนก่อน
WLHD Dirt Dayz - September 24th, 2023, Cherohala Skyway and Gravelhala
March Moto Madness 2023 - My Rides : Part 1
มุมมอง 275ปีที่แล้ว
March Moto Madness 2023 - My Rides : Part 1
Mitas E-07 - Setting the bead on a new rear tire
มุมมอง 56ปีที่แล้ว
Mitas E-07 - Setting the bead on a new rear tire
12:30 there's a tab on the top side of the connector, a small screwdriver or 90deg o-ring pick makes it trivial to remove from the frame. Just hook it in the top and it will slide off that metal tab real quick. I think it might be designed so you can pull the harness side off the bottom (again small screwdriver or tool to grab the tab down there) then disconnect the top part from the frame -- but I removed the pair, then separated afterwards.
Chase, could you please post the part number/SKU of the filler gauges you bought from McMaster-Carr? I believe its the SKU: 2066A7
correct www.mcmaster.com/2066A7/
After remeasuring today.. You can get a measurement on the intake cams from the front side of the bike with the short blades, but you can't really see what you're doing like you can from the back side of the cams.
You need the "special tool" to make removing that fuel quick connector. These are cheap and make the removal job effortless.
@@jamesklauzner6938 they don't list a "special tool" in the service manual for that. If you can find a part number for it then I am all ears
DO ME NEXT
Can we have more drunk math videos? "mill-uh-meet-er"
Sure.. anything for you bud😂
love the dogs. hate the sand lol
You need to replace that paper air filter ASAP with anyone of the aftermarket air filters
It's on my list.. will probably try DNA this next time.
There is I believe quite a # of specialty tools that will REALLY cost you I think. Should be covered in the Shop Manual. Your little box is just the tip of the iceberg.
Others have done this job without needing to purchase the special tools.. I haven't been able to work on the bike for a few days, because of life, but this will be covered. I wound up making my own camshaft tensioning tool.. but I may need to modify It a little.
@@DonkeyDongDoug I will be happy to watch your progress. I'm only 7,000 mi in on my Tuareg. Thanks for the reply
@@1young-geezer Thanks.. I'm still trying to figure things out. I'm not in a huge rush on it, but hope to have it done within the next month or so... but would also like a working motorcycle at the end of it lol.. plus filming everything adds some time to the process.
tree!
First!
Thanks for the effort. These videos are pure gold! Can’t wait to see what the valves look like.
I've measured them. Only one was in spec, but right on the edge of it. I'm probably going to go back and double check one of them because my reading was 0mm of clearance. It will be a few days until I am able to pick back up on it.. next step is to unlash the camshafts, and I built a tool for that, but not sure it will work yet.
I like the content. Love the shirt. lol "YoU'rE dOiNg iT wRoNg!" I do hate when you get to something that looks so simple, and you just can't get past it. Like some little hidden tab somewhere you got to hit, or line something up just right.... ugh.
don't worry.. plenty more content to come from this. I have my valve measurements now.. have to tear the valvetrain apart to get to the shims and see what I have in there though. That's the part that's going to suck
I hope it turns out OK too... I say that everytime I just do the oil and filter... lol
Sexy.
windstream keeps sending me emails about "fiber is coming soon".. so 4k videos will be getting uploaded two years from now.
@@DonkeyDongDoug Elon can save you. All you have to do is accept him in your heart and a Starlink dish appears on your roof.
Don't be suspicious, don't be suspicious 🤣
I was so lost.. I didn't know what was going to happen :D
Wrong turn?
I was going to meet Rackhouse in Ellijay.. I usually go across Fort Mountain to get my early morning twisties in on the way there. There weren't any "Road Closed" signs or deputies blocking the road. Thankfully the cop at the end of the video didn't give me any shit. I had something like this happen to me once when I was 16, and I have been stewing on it for the last 20 years
Did you break your mirror by riding too close to the Popeye's drive-thru?
Some nerd on a Ninja 300 got mad because he couldn't keep up with me on Blood.. so he smashed my mirror. Very rude behavior
audio sounds pretty good!
I was pleased with it. Had to turn it down a little in post, but I can live with that
Never can be on autopilot on a bike. Good awareness and reaction.
that looked like good time. sorry I missed out!
We'll catch up next time.
@@DonkeyDongDoug for sure!
Spoiler alert. It handles it great lol. Also, I can’t get enough of that induction sound. Chefs kiss
This was my first real time using the 360... I may see if the DJI Mic I have will work with it, and hopefully pipe some of that EAR BLEEDING induction noise into a mic. It's sooo fucking loud, but sooooooo good
Watch out for those Jeeps!
They are much more manageable when they're going in the opposite direction as me.
lol, theyre using the passenger pegs.
What the actual fuck did I just watch
when youre not 16 anymore
Second
so... um... did he have his feet on the passenger pegs? Hmmm, he must've found out that makes you go faster.
The body work they do.. I am still trying to understand it.
Nice!
Nice!
Just a few Pan Ams out there, eh?
Ah, a H-D event... got it. And You're Welcome for watching... GOBBLESS
yup, the guy on the red Pan Am is the GM for White Lightning HD, and the ride organizer.
dang! and First
Yeah that doesn't seem like it's the safest one out there...
First!
First!
HEY QUIT GPSEN AND DRIVE DMAN LIBERIA MILLERIALS ON THEYRE EPADS DRIVERN MAKE ME SICK NOT MY PERSDANT
Skid plate = skid marks
Things that are cool on the road, but uncool in your underwear for $1000
@@DonkeyDongDoug aaaand... you hit the Daily Double!
Dead asleep....
FIRST!
You were in that cars blind spot and car drivers usually dont check their blind spot so either keep more distance or overtake quickly
Ahhhhh The Thomas coming out lol
dont ride in peoples blind spots like that dude that could have ended badly. nobody is responsible for your safety but you.
Your audio is a little weird. I keep hearing this "error tone" when you're talking.
That's his horn.
According to the DJI support forum. That sound is a "user generated" error. They say a patch should be available whenever I get my life right with God.
@rackhousemoto I bought the Sailor Horn.. it honks in French.
@@DonkeyDongDoug hon, hon, hon??
Can't fix stupid.....1st
Dangit Ghost..... Second!🎉
The only thing i keep thinking is that left mirror need to be replaced...
I figured you would be the first to try and take a crack at something.
@@DonkeyDongDoug You need to take some time to reflect on your priorities.
Nice video, is this the road that goes past bald river falls?
No. That is River Road. That was in the previous video. North River Road kind of follows the Cherohala Skyway, and eventually crosses it at the NC state line, then it turns into some other road and runs all the way to Robbinsville, NC. Some people refer to the whole road as the Gravelhala.
i am sad i couldnt make it, cause that looks awesome
No worries man. We can go back up there first chance we get. There are plenty of camp spots along Citico Creek.
Muy bonita!