วีดีโอ

Basically yeah, but I don’t like to recommend any new purchases. Do you need more than 30min? I had my R6 with this setup overheating by turning (waking up) on camera monitor while filming. Nothing is bulletproof unfortunately

Basically yeah, but I don’t like to recommend any new purchases. Do you need more than 30min? I had my R6 with this setup overheating by turning (waking up) on camera monitor while filming. Nothing is bulletproof unfortunately

Thank you 🙏❤️⭐️

You need to start recording on the Ninja. Let me know if it helps 👍

Your Ninja overheats?

@@persvanstrom god yes! I'm trying to get my Ninja V to work with it. At the most I've recorded 9 plus minutes before the Ninja says there's a problem with the connection, and shuts down. Any input would be MUCH appreciated.

@@corlissmedia2.0 You run latest firmware? I would check HDMI cable. As it complains on connection…

@@persvanstrom I’m running 1.3.0 on the camera, 11.06.00 on the ninja v

I’m using an atomos cable that set me back $75. The ninja v is going to a 2TB Atom SSD. M with you, the bottleneck is the hdmi D connector on the camera.

Yes, in general and thank you 🙏 How do you prefer to do it?

@@persvanstrom I feel if I expose it "normally" I get a lot more noise than if I used rec709. I have seen that the recommendation is to over expose 1 or 2 stops when using clog3 and then bring down the exposure in post, to achieve a similar noise level of the rec709. I have to do some tests

I don’t feel I get more noise and as 18% grey never change, this is how I prefer to do it as a rule of thumb. You?

@@persvanstrom I have to do some tests. I normally don't shoot on clog3 but just in rec709 but when I have, I feel I under exposed it a bit and I need to bring it up and see more noise than if I raise a same exposed shot but in rec709. I have watched a lot of people recommend to over expose the shot by 1 or 2 stops when using clog3 so that the shadows are more exposed and then in post you bring them down to the level that would have been exposed in rec709 and that would get similar results.

Glad it helped. I think I learned from Vanessa Joy tbh when I first started 😊

Oh, i’m very sorry to hear that mate. I’ve got mine used with the full accessory pack, but I still use custom HDMI cables :-)

You can definitely use it outdoor 👍 I use several combinations.

If shooting close to a computer 😊👍

If you come close to Gothenburg, poke me and we can hook up for a street photography day together if you like? As to focus. I tend to use spot focus to lock focus on a person and then immediately switch to AF. Goes automatically by muscle memory. Often it’s not needed, but after 150.000 photos in 2y on my R6s it’s just how I do it 😊

Tbh, I don’t know. I have to test. More that asked this. Log or not, shouldn’t matter that much. Frame rate and resolution does

@@persvanstrom got it. Thanks so much for the reply

Solid

Thx 🙏 much appreciated 👍

Mirrorless DSLR? 😅

@@persvanstrom There's no mirror , which means there's no reflex.

@@413TomaccoRoad I was ironic 😊

Toudien! Hey ❤️ and thank you 🙏

Worse? Really? What firmware are you on m8?

@@persvanstrom yep 1.8.4 i can have 35min with a battery and 2 memory cards, just the creen flipped. And with the dully battery and card slot empty, and screen flipped, it's a little less than 25min Oo

@@KhasisLieb But 35m is above the hard limit of the R6m1? I'm confused :)

@@persvanstrom 35min with hdmi output, no recording on the camera. (want to test how long i can keep it up for streaming)

Yeah, good find. When you click record on the Atmos, you only record externally, but when you hit record on the camera, with the settings, you record both internally and externally. The problem with internal recording isn't only overheating, but also the 30-minute time limit. Glad you got it to work and thank you for sharing

Thank you for watching 🙏👍❤️

Thx for that 👍

I agree. Just got a 2nd R6. Love them. How are you using yours? Much video work

@@persvanstrom No, no video work at all. I photograph nearly everything apart from sports, from concerts, weddings, dogshows to landscapes, nature, macro, old buildings, amateur models ...

@@wanneske1969 cool <3 You could prob teach me a lot :) I retired my R6 to photo only a while back when I opted for 2xC70 for video. I only use R6 for photography as well. Mostly events, headshots, products and BTS. Got my 2nd R6 for less than 1400€ new a couple of months ago. Hard to go wrong with that price. Amazing camera. You on EF or RF lenses?

@@persvanstrom I still use my EF-lenses (15 !) with the adaptor. grts

@@wanneske1969 15!? wtf :) I use only EF as well, but so curious about going RF.

Thank you 🙏

TBH, yes it sounds sketchy, but it worked for me. Try one at a time and see if you get a different outcome? Not here to sketch anyone, just trying to help out the community.

@@persvanstrom Oh, don't get me wrong - I'm not accusing you of anything! Just thinking out loud. I'll def test it, but have to rent ninja V first :)

@@wah0wah I answered in a different video but ran into several overheats with Ninja, due to me touching monitor on the R6 checking focus. So my own feeling is that the screen covering the back is a big reason for overheats. No matter, Ninja is required for 30+ min recording as the R6 is locked for longer recordings unfortunately.

@@persvanstrom awesome insight! Thank you, I'll check that video 👍

I've only tested a K&F, a Cochin before I decided to go big on a PolarPro Peter McKinnon edition. As I mostly film on C70's now with built in ND-filters I wanted a fixed as I prefer that for photography. Not sure if that helps? I love my PolarPro, but they are expensive. If I could only afford one, I would prob go with a VND, but personally I prefered using fixed.

I would be very happy if you answer immediately.

You can't, it's normal. Video is by default 16:9 format and your photo is 4:3 (1.33:1). Thats why your screen back on yoru camera is 4:3. So when switching to video, it will show you what you will actually capture.

Thank you so much 🙏❤️ Makes me so happy to hear that you enjoyed the video. Let me know if there’s anything you want me to cover in a future video

A GoPro Hero 9 black

Hands down, best comment ❤️🙏

Let me check

Long time since I used M50, film only with C70 now adays, but my workflow is the same. I ALWAYS go from what I shoot with into DWG/Intermediate (as it's the widest space) and I output from DWG/Intermediate -> 709/709.A (as I'm on mac). Then I grade in-between as that is the least disruptive. Any look LUT happens after the output transform. As Cinestyle isn't a real logprofile but mostly just low contrast, it works with 709 as input and then you sort it with correction nodes before grading inside DWG

@@persvanstrom Thank you for your answer! I'll try it :)

Let me know how it turned out

I forgot to turn off 2nd Zebra, made it unclear. Sorry for that

It’s a regular Amazon dummy. Alvin Cables I think

yeah, not cheap at all, but so valuable. Yeah, I agree. Running around measuring random lights and red are often lacking. Do you know why?

Right :) and yes, you can set it to what you need and want, like 75. 40 just represent 18% grey in CLOG3 (and 2). Noise shouldn't be connected to either CLOG3 or not, or even ISO. Noise is just when you don't have enough light hitting the sensor. It can look noisy if you don't convert it correctly from LOG to rec.709 or if you miss exposure due to looking at curves in LOG and not 709. I would recommend to test a little. Only real truth you can use is that 18% grey is ALWAYS 18% grey no matter you run LOG or 709, so expose for that. It's always on 40 IRE. Test with only lighting your card in both log and 709 and then compare. If you have no difference in noise in the two, I would conclude exposure problems when you work in LOG. Let me know how it goes?

thank you very much for your reply! I appreciate it. Definitely wanna test it. Will do! You know what confused me the most? I shoot in LOG 3 Cinema Gamute. When I convert from LOG 3 CG to 709 - its sooo noisy! When I converted from Log 2 to 709 - super clean image. So weird. I'm a new guy here. Just learning. Hope you understand. Thanks for the help! P.S. Using internal LUT in FCPX or downloaded from Canon website - same story @@persvanstrom

@@ArtyomPersidskyTube but you don't have CLOG2 on an R6 right? Only CLOG and CLOG3. I don't know FCPX unfortunately, only use DaVinci. Hmmm...

Im using R8 and yes, I dont have clog2. I know this is strange. I will try to figure that out and hit you back. Thanks again! @@persvanstrom

@@ArtyomPersidskyTube where you able to figure it out?