วีดีโอ

Thanks, was just trying to keep real no bs !

@@Driverclass1 thanks

No part # it only comes with full windshield

Thanks appreciate the positive feedback

@@rlvin6843 the roll cage locks on each side is what you are talking about?

@@Can-AmX3Dude yeah it is and I just wanted to remove the whole windshield and I couldn’t find out how to

@@rlvin6843 if that’s what you’re asking then used a peace of wood like the size of a hockey stick about 6 inches long and get someone to unlock or press inside and uses the peace of wood at the bottom and with a hammer tapping it up until it’s release it becomes hard to remove after debris or mud cooks behind it now before I put it back on every year I spay a silicone base lube on the back makes life way easier also can use peace of steel but will make Marks and scratches hope this helps and you understand what I’m saying if not ask me more about it and I’m happy to help you

@@Can-AmX3Dude thank you I think I got it 👍

@@rlvin6843 no problem glad to help

No problem glad you like it and appreciate the positive feedback be safe out on the trails

Thanks for the update and appreciate the comments

You can find it at any auto parts store it a funnel used for differential www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwiTh_TT4taGAxUAZ0cBHeSbAvEYABASGgJxdQ&gclid=CjwKCAjwjqWzBhAqEiwAQmtgT6n-MY_wuyQprm5oUr-YUzqxATFZIflegjW3hem5tjp5NyRzBgfJPBoC-VsQAvD_BwE&sph=&ohost=www.google.ca&cid=CAESVOD2y5iGVl0xCViN2g_FOshNkzpxjS0aCFONmONEDPPdKceylBzeCS5Pm5bHvqOBNTzrx22Mtlm5h32PUYee6jjK3GCWLIPSgOqBVvKfqim-Tzo-Dg&sig=AOD64_3It8k7hZwc9OcC5wlBTPEYyyRnxQ&ctype=46&q=&ved=2ahUKEwim-e3T4taGAxVvF1kFHciBBAsQzzkoAHoECAQQDw&adurl=

www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwiTh_TT4taGAxUAZ0cBHeSbAvEYABASGgJxdQ&gclid=CjwKCAjwjqWzBhAqEiwAQmtgT6n-MY_wuyQprm5oUr-YUzqxATFZIflegjW3hem5tjp5NyRzBgfJPBoC-VsQAvD_BwE&sph=&ohost=www.google.ca&cid=CAESVOD2y5iGVl0xCViN2g_FOshNkzpxjS0aCFONmONEDPPdKceylBzeCS5Pm5bHvqOBNTzrx22Mtlm5h32PUYee6jjK3GCWLIPSgOqBVvKfqim-Tzo-Dg&sig=AOD64_3It8k7hZwc9OcC5wlBTPEYyyRnxQ&ctype=46&q=&ved=2ahUKEwim-e3T4taGAxVvF1kFHciBBAsQzzkoAHoECAQQDw&adurl=

If you check when I just remove just a bit too pull it off the tape cover in the back and there’s just a bit that sticks to the paint without pressing on it just to hold it in place then when you got it where you want it press your spot where the tape protector you got sticking out to pull and just pull and hold it from the opposite side that you are pulling just to be sure you don’t move and everything should go right, hope this help

And once you get one section of that 2 way tape protector off push pressure on the tape you just expose underneath and repeat

Thanks

@@davesauerzopf6980 glad to help and fell free to ask questions anytime

How much for the trailer?

It has increased in price since I bought it!

Thanks 😊 appreciate the feedback, feel free to share your thoughts anytime!!

Lol No it’s not RPG proof, hope no one is playing on shooting me with one 😂

No you make a gasket with a sealer if you check a my front differential video you should be able to know what you need to do

yes I did see it, just your video your doing the cover on the passenger side,my leak is on the driver. so there's no gasket or speaker there at all,just that green oring. so your saying put sealant on there anyway?

@@squishy332000 no change the O ring if it is leaking

no you know the part number for that green oring?

@@squishy332000 ya I do I change mine when I did my diff! Still have the bag it came in cause I keep my old one was nothing wrong with it I just didn’t want to need to take it out again since it was on the counter will let you know tomorrow if that’s ok 👍

Thanks Dude, that is really appreciated and please feel free to ask questions and give feedback on what you would like to see may not be able to do everything but can help or give feedback/advise, and thanks again for subscribing that’s to me is the biggest show of someone appreciation of my videos

Thanks Dude!!!

Thanks Dude!

Sorry can only have 1 winner if the Chanel keeps growing will have more giveaways in the future!

Ya it my boy’s ATV and he thanks for watching greatly appreciate

@@Can-AmX3Dude they sure are tanks, easy and cheap to fix also, at least on mine

@@cwsenderson yes would have to agree with you on that

More will be coming and thank you for watching, it greatly appreciated!

Thanks for positive vibe !

Thanks man greatly appreciate all of you !

How do you do it ??? Always looking for positive and better ways of doing things so please let me know!

Ya must be, but thanks for the comment

50 feet 6000 pounds that’s the same thickness as 4500 pounds it fits good

😆

Don’t understand the question?

No I think I had a cold and was just out of breath and putting the microphone so close was not a good idea 😆

Yes that right

I ran it along the radiator hoses and tie rap it going to centre console

If you stick you head under the steering you will see behind the gas pedal the hoses I’m talking about

That probably need to go to dealer I can not find it anywhere

I will check if there’s a part number on the part and let you know

They both said i need to buy the whole new windshield. So they want me to spend over 1k for 20 dollar parts BS ​@Can-AmX3Dude

@armandoavalos9283 no don’t do that I will look into it and try to save you money

I called my dealer that’s got the best parts manager he is opening a case number with BRP to find the part number and get it I’m going to go check on my clips for part numbers!!!

No problem, glad it helped you out and really appreciate the positive feedback and be safe riding!

Yes it is

No I haven’t except for the front cv’s being stuck in the front differential because they hadn’t been greased up!

PS5 ??? 😆

It doesn’t matter if the video is old new content pop up in my notifications, but to answer your question if you completely removed the mushrooms shape level the plow you would have the blade cut everything, so yes it would, cause it’s a heavy plow if you go with the steel plow and extension and end blades, hope this helps clarify your question

Yes you can lower the blade guides, but I prefer to keep snow covered not to use up the blade or the guides hope this helps thanks for your questions

I don’t think so, and to get to the green o-ring you got 1/2 done pulling the diff out

Great video though! Thank you for making a video with a real life perspective.

@@iowndu21 thanks a lot I’m glad you enjoyed it and appreciate the feedback

Ya but it sounds good 👍

Well thank you for your positive feedback , the biggest thanks you could do is subscribe and if you are, a big thank you 😊 it’s really appreciated, be safe on the trials

That one is funny, because with all the extra added on we put on are X3 and bigger tires, I don’t think my wheels bearing won’t turn!

@@Can-AmX3Dude it’s your ride. I hope DIY people do a little research by reading others opinions.

@@KentuckyCanAm have you ever packed a wheel bearing on a pickup truck or a trailer and I have and never had any problems by fully packing them cause that what we did at the dealership and heavy equipment and never had any problems in almost 30 years , but you can do anything I just know that I didn’t grease mine when I got my X3 and the rears had to be replaced in 6 months on stock tires and now the rears are on 3 1/2 years on 32 inches and no play !

Ya man grease dose wheel bearings the first day you get your X3 !

The noise is probably the drive line needing grease, the oil check your air filter remove it and see if you got oil in your air box and check the smoke coming out of your exhaust pipe to see were it going, let me know !

Thanks Dude ya love it !

About to put it on in a bit! How's it holding up? I live in Los Angeles so our weather isn't bad, only the politics...

@@edscorsese it great 👍 hasn’t changed colour or unglued or moved at all

What do you use to split your primary clutch?

Clutch puller is all you need. th-cam.com/video/7i96pSq-n5s/w-d-xo.html@@Can-AmX3Dude

So you bang the treads and if you ever miss it may cost you a spider, but it works aluminum after banging it for a long time not sure 🤔 I want to do that if you do it once and don’t ever need to do it again ok 👍 but I play in my clutch minimum 2 times a year , but thank you for you feedback it’s appreciated

It`s the same way they do it on the new Pdrive clutches, both on the X3 and on the ski doo turbos. and have for years.@@Can-AmX3Dude

Guess you tell GBoost, th-cam.com/video/aBgckewk2qU/w-d-xo.html@@Can-AmX3Dude

Ravco.ca

Yes I do

Your talking about the other video when I’m trying to pull it out if so ya basically cut it with grinder cutting blade until you can split the diff was my only option, just because I didn’t grease the splines when I got my X3 It was a real pain and appreciate you watching my videos and thank you

Have never heard of Kroil wood really like to know where you can get it ?

I get it from work but i actually found some on amazon

@mattblanchard6831 thanks man appreciate the info

Tnks to you for the trials and errors. Gives us X3 guys some do's and don'ts. Especially their enxpensive as F@#$ for parts. Lol. Been soaking my c.v's for the last week in kroil i guess will see but i'm confident on that shit. I'll keep you in touch 😅

@@mattblanchard6831 ya for sure everything I have learned is been by mistake I didn’t have TH-cam growing up and had to learn the hard way that the reason I do this videos, I wish I could post videos more frequently but, sometimes after a 70+ hours week of work the lazy boy looks really nice 😊, more nice then a cement floor in the garage! So wen guys like you comment and give advice or just appreciate is about the only thing keeping me making videos!