วีดีโอ

Pretty bitchin!

Не понимаю зачем два домкрата. Достаточно одного горизонтального. Не, человек сделал стоящую вещь- респект! Но делая подъемник для легких мотоциклов и мопедов типа хонда дио, буду устанавливать только в горизонтальной плоскости. Ну или два спаренных но опять таки в горизонт.

It would be much more stable with three wheels.

Очень интересно, думаю о таком варианте.

I did this much easier by buying a larger diameter PAS on a Huffy (one piece crank) th-cam.com/video/VBnZiKGxFhs/w-d-xo.htmlsi=NScmqEC-5XK_4v8D

Hey Chuck what OEM paint did you use I'm trying to match colors i can't seem to find the right one

I did this and that didn't work

Thanks, it helps me too much

ah, i didn't think of that.. i cable tied the bracket on the outside of the frame, not using the sticky part.

thank you for sharing this excellent insight and walkthrough. i have a 3800pld with purple learn button door opener and a 398lm wall control panel where the motion detector light on/off control stopped working, as in it would turn light on and leave it on. i purchased latest 889lmmc wall control panel having been told the wall control panel motion detection sensor must be broken and the new wall control panel not only doesn't work it makes a constant buzz sound. someone in a reddit forum exchange said issue with new wall control panel, and perhaps the existing ones motion detection, is the logic board and to replace it. replacing the capacitor(s) sounds like a better first thing to try given what you stated here and fact that everything else about door opener and original wall control panel is working fine.

was it originally rwd? mine is fwd and i want to do something similar to this

'' SERIOUS QUALITY '' ...yup, no doubt. ALOT of those drill ' bits ' coming from china, those yellow ones, AREN'T WORTH A plug penny ! Don't even make very good awls, or punches - only good for pounding into a wall ; use for hanging hoses. Cheapest ' steel ' ever...chinesejunk. I use very old, GOOD drilling bits - all black ! or titanium, or carbide tipped.

Good idea same problem for me will try this idea. 😊

I cried this and made a video. I failed at my mostly because of the hill in my driveway and the weakness of my handlebars. Mine probably would have moved his boat just fine, but my camper was just too heavy. th-cam.com/video/7TGVYzbKzxo/w-d-xo.html

Thank you for that great idea! That's what I'll have to do with my older Huffy mountain bike.

Thanks, and God bless you!

So I have been using something similar but with roundish deck wheels. The problem is the resistance the wheels add when going through snow. In a light snow they are fine, but in deep snow it becomes a wrestling match.

Thank you Chuck. It's been a minute since I've used a soldering iron but here I am with an operational garage door unit and about $120 still in my pockect. Total repair was $8.00 and 20 minutes from start to finish..

the way you made the mark for the first hole was smart. I made it much more difficult...nice job!

This was really helpful to see the basic structure. I know it’s not a full DIY but my window needs are different (mine is vertical, I need a cat cat door, etc) so I’ll have to make my own adjustments anyhow. This was great to start with some ideas for mine. Thanks!

Thank you so much for this video. Your instructions as to what was happening when the light was on was vary informative. I followed your directions to repair it and it now works great. Thanks again.

I am going to do this! Thanks so much for posting. I like how you bolted it in re maintenance as well. I have a 5x10 Enclosed Aluminum trailer so this should just great! I’m embarrassed to say it but I live on a crazy busy street with an equally narrow driveway! I might try this for getting in the driveway!

No stupid music talk us through the video

I was thinking about doing that too just never got around to it

I need to build one of these out of wood for some very light-duty work.

PERFECT! got 2 old lawnmowers behind the shed... I'm doing this today! But based on suggestion, I'm mounting this behind the existing skidders to clear a path for the wheels... trial & error! Thanks

I have two openers with the exact same problem. Since Radio Shack is gone by the way of the buffalo, where would I find a new capacitor? I have another opener that I have saved for parts and I’m thinking about swapping out the circuit boards. It a few year’s old and has a yellow learn button.

I’m going to build one of these but with an electric hay elevator. So we can load 10+ bales and remotely drop a bale through a window.

Hi Chuck, this procedure worked like a charm, thank you for explaining and documenting it so well! I used a 330uf 50-volt electrolytic capacitor to allow a little extra headroom on the voltage rating. A few additional pointers that may help others: the negative stripe on the capacitor faces the nearby edge of the board. When done with the repair, if your garage door only opens a few inches, you may have bumped the limit potentiometer as I did during the repair. If so, simply use a screwdriver to adjust the blue (on a Craftsman operator) "KG Up" potentiometer value upward, just enough to get the door to open fully. That did the trick for me. The initial symptom I had was that the remote button began working erratically; sometimes several presses were necessary to get the door to operate. That symptom led me to believe the battery in the remote was weak, but testing proved otherwise. Eventually the remote would not open the door at all, but the wall buttons worked. Now, the operator is working beautifully again!

Check the pee hole, bugs like to jam it up

While this method is good as an indicator, a lot of these caps will still show correct capacitance but in reality the ESR will be too high and therefore bad. Even a cheap ESR meter will tell you this :)

Thks ?Does this work the same for inductors too?

❤

what would happen if you only had the horizonal jack ? The vertical one only looks redundant .

Hi Would you be able to share what meter reader you used to read the capacitors? Thank you

wow, mis felicitaciones chavo, hay que hacer uno o varios están super bien, saludos desde mi tierra, Monterrey, N.L., México. ´.

Two things does yr cat have a friend cat to keep him company, he or she looks lonely, and the other, is the top part of the window resting on the cage should be secured? Cause of unwanted visitors going through the window above

There are many good ideas in this trike design. I like the manner in which the rear needs of the two bicycles were joined together with the main cross beam linking the pedal hubs and the seat pipe helping a little. With the seat being placed very close to the real axle means that the main cross beam is not twisted by the force on the front wheel. Being a very old man , I would have installed the pedals a little lower. Also the crank for the steering should be a little longer to have a more positive steering. Apart from that all is top notch, Congratulations, Well done. Perhaps a little improvement in welding would have looked better, but what there is is good enough.

thanks for the video mate, now I can continue the install.

Worked like a charm - THANK YOU for saving us big bucks! Our 2001 LiftMaster was doing this exact same thing. I knew it had something to do with the logic board and priced one of those out - $149+. Found a place on eBay that would refurbish the logic board for $50. Then I stumbled across your video and thought, this is a no brainer! bought a pkg of 6 of the capacitors (only came in a pk of 6) for ~$8. Soldered the one at the top like you did in and worked perfectly! I figured you saved us ~$500 (cost of new opener + install). Good Karma to you! Thank you so very much. -John

Awesome, what is the hp of the motor?

No spark

I can’t figure out how to take the damn housing off to get to the carb

Okay, so where’s the bolt?

I have a 20 year old 3/4 hp Liftmaster. For a few weeks I was noticing it was acting up, then one day it was totally inoperative. Other troubleshooting vids recommended replacing the logic board which is usually $50-150 for the part, but the one for mine was obsolete/unavailable. After watching multiple videos I stumbled upon one that mentioned the capacitor. There was only one on the board so removal and check showed is was no longer in spec although it wasn't popped/split open on top. 24 hrs later I had replacements in hand (five for $5). Been working well for two years since that fix. As you noted, cracks in solder joints due to vibration could be causing intermittent issues, so good to check for those too.

I picked up a new C450 at a Goodwill for $5.00 the battery would not recharge your video was a blessing took me half an hour and it now works great Thanks Again

Link to where I can buy them?

What about when you run it into deep or hardpacked snow, do the wheels stop it??

Does the magnet still work well in winter conditions? -30 degrees c?

Thank you for sharing your helpful tip with me and others. My Craftsman garage door opener, manufactured in 1998, recently stopped working and I tried various solutions, like replacing the battery and checking for radio signal interference, but nothing worked. After concluding that the circuit board needed to be replaced, I searched online for a new or used one, which cost between $120-$150, as well as instructions for replacing it. During my search, I stumbled upon your video accidentally and found it very useful. I didn't bother to check the capacitor using a meter and simply removed the old one. At a local electrical part store, I bought a new one for only $0.99 and also purchased a soldering kit from Walmart. Following your step-by-step instructions, I was able to fix my garage door remote control and it now works like new!! As a woman who had not previously used a soldering iron, I hope my experience coupled with your video instructions can help others who are on a tight budget like myself and may have similar issues with their garage door remote control. Thank you for sharing this helpful video and I wish you all the best in health, happiness, and prosperity. 🙏