วีดีโอ

You are welcome 😊

@@juanitahaney2157 Thank you so much. I try to be helpful 😊

You are welcome

You are welcome! I’m so glad you found it helpful.

That is correct. I mentioned in the video the glyph support in Silhouette Studio is in the Designer edition upgrade and above. If you go to 4:03 in the video I show two ways to use Hello Honey glyphs if you only have the basic/standard free version of Silhouette software. I even switched my software to standard so my screen would look like someone’s screen that doesn’t have an upgrade. If you have any questions or need help let me know.

@@laurencec09 Did you check the box to Mirror Displays under Arrangement in settings? I show this at 1:55 in the video. At 1:38 I open the settings to get to that part. After you click to mirror you should be able to change the Display resolution if you need make changes. I hope that fixes it for you. Let me know if it doesn’t and I will try to find another solution.

@@LittleGraySquirrel Ok so I tried this, I mean it kinda worked but only if it wasn't optimised for the ultrawide, image just looks veryyy widescreen now but usable

Sorry for the delay, I just now saw your comment. Were you able to get it figured out? When you open Silhouette software, open the library. Are you logged into the library with the same email you used when you first created your Silhouette account and added the software upgrade license key?

They have been working on their website. It has not gone well. This should let you download the software at this link. Choose the one for Windows or Mac whichever computer you have, no need to buy an upgrade until you are ready for it. www.silhouetteamerica.com/softwares

I have heard that they have redone their website which has been causing problems. I believe it was only supposed to take a day but it has taken quite a bit longer.

You are welcome 😊

I don't have a lot of knowledge about wi-fi and connectivity but I did figure out how to switch the printer so it will turn itself on when you try to print from your phone. It was driving me crazy too. Hopefully that is the issue you are having. I have the steps on my post about the printer www.littlegraysquirrel.com/wide-format-inkjet-printer-for-craft-room/ Scroll down on the post or select section 6 in the Table of Contents "How to change the Canon Printer to Auto Power On".

Thanks so much. I will try.

Thank you so much for the information about the printers auto on. I think that was the missing piece on my end. After switching the printer to auto on I rebooted my router and reconnected the printer. Now it will stay connected to my devices. Thanks so much.

@@kristie3963 Excellent!

Thank you 😊 My goal is to be helpful, especially with print and cut.

You are welcome! I’m so happy I could help.

Thank you 😊

What software are you using for your image? Or is your image already 12x12? I can make you a video this evening to show how. You need to use the rear feed slot. Change the printer settings using the touch screen to change the size to 12x12, be using an image that is 12x12 and have the preferences in the print dialog box set to 12x12.

@@LittleGraySquirrel I don't know what i did but it is now printing 12x12. I think I had it set to plain paper instead of cardstock.

@@little.iodine Yes, that makes sense. Changing the paper type to cardstock will let you choose the 12x12 size. I’m glad it is working for you now.

Yes! That is what I have been using. This printer uses one 280XXL pigment black cartridge and four 281XXLl cartridges in black, cyan, magenta, and yellow. I usually look for cheapest with most and highest reviews on Amazon. You should be able to find them for about $2.40 - $3.60/cartridge. I have bought this pack with three sets of five amzn.to/3SXOJkl and this set which was a single set of five amzn.to/48Do6XB This is the cheapest one I saw most recently and it still has great reviews amzn.to/4bVSiQL

I use Silhouette Studio because I am most familiar with it. I have a video on how to use patterns and digital papers in Silhouette Studio. It is a free software if you are just printing from it. th-cam.com/video/f50-cy9tJt0/w-d-xo.htmlsi=mgWz9I7lFC7wAmnu You can also use image editing software like Photoshop, possibly GIMP, try Canva? You need your choose the borderless setting and choose a material that the printer is able to print borderless on. If you choose borderless I believe it will only show you the paper options that are compatible with borderless. Let me know if you need anything else.

I usually just choose the setting for the paper type I am using. I would probably use matte presentation or premium matte for cardstock (I think those were options, my craft room and printer is packed up right now). Cardstock is pretty porous/fibrous. You might look into pre made cards to print on or something with a smoother surface that will have a more vivid print.

Thank you so much for taking the time to comment. 😊 I’m so glad you found it helpful. A lot of people have problems with print and cut. Success is all about following the proper steps.

You are welcome! I hope you have as much fun with it as I do.

You are welcome 😊 My craft room is torn apart right now to redo the floor. I will measure it and get back to you as soon as I can.

@@LittleGraySquirrel thank you!

The stand is 20.5” wide, 16” deep, and 24” tall

@@LittleGraySquirrel thank you!!

I’m so glad you found it helpful. I hope I can help. What software are you printing from? You can only print 12” wide from the rear feeder.

Did you buy a software upgrade? Is this the first time using the license code? Or have you used it before? If you bought a digital code online it is usually sent in an email from the company you bought it from. If it was a physical card then you receive it in the mail and it looks like a gift card.

You are welcome 😊

Hi Sherry, I just sent you an email with the file. I’m so sorry it hasn’t been a smooth process for you. I changed website hosting recently and it may have affected my library login.

You are very welcome! I appreciate you taking the time to leave a comment.

You are welcome 😊

In the preferences settings for the printer, in the Additional Features area, check the box next to Borderless Printing. It will limit the Printer Paper Size options you have like you can't do Legal, A5, or Custom sizes borderless but there are still many choices. It will also slightly enlarge your image to extend off the edges so don't use borderless for something where you need something in the image to print at an exact size.

I will try. I have a few questions. What kind of ink are you using? Factory or third party? Have you done a print head cleaning or tested the print from the printer touch screen? What program are you printing from? What kind of material are you printing on?

Hi. I am using factory ink. I did all the head cleaning stuff, but I don't know how to do a print test from the printer touch screen. I am printing from Word. I am printing on tissue paper, but when I print on regular copy paper, I have the same color issue. I just printed something from Cricut design space, and the black doesn't even seem to be as dark as it should be. @@LittleGraySquirrel

Yes, you can connect via Ethernet cable however the printer does not come with the cable (only a power cord). The Ethernet port is right above the power port.

Excellent! I’m so happy I could help you. Let me know if you need any more help.

Hi, I just now saw your message. Did you get your new printer yet? What do you think?

Sorry for the delay. I haven't experienced that but I have only printed anything that would be noticeable from my PC. I don't know for sure what the problem is in your case but I know there can be a difference if the computer or device is using RGB color codes vs CMYK. The TS9521C uses CMYK. If you are using procreate when you see this problem try this video and see if it might help th-cam.com/video/fHUhKM1dPWI/w-d-xo.html

@LittleGraySquirrel I changed it to CYMK from RGB and I am printing from cricut design space on my PC. I use concepts not procreate.

If I understand correctly, after you paste the glyph into your silhouette screen you see rectangles? Select the rectangles, go to your text style tab and select the font you are wanting to use. Let me know if that helps or if you need more help.

I use Silhouette Studio as my design software. If you are just printing from the software you can use the free version. You don’t need a Silhouette machine to download it. You do have to have a Mac or Windows computer though. You can read the minimum computer specifications and get the software here if you need a design software. www.silhouetteamerica.com/software/ss Inkscape or GIMP are free and would work but they are more technical in my opinion. You should be able to use Canva as well. Let me know if you have any other questions.

It does look similar in size but the decals or place where they would go look a little different. There looks to be a lot more raised parts on the Droid Depot droids. Some of them might fit. I used a digital caliper and created the template in Silhouette Studio to create this cut file. You could do the same to create decals for the Droid Depot droids. The cut file is free for my newsletter subscribers and you can unsubscribe anytime so you can test cut a few pieces to see if it works.

@@LittleGraySquirrel thanks for the quick response.

You can if you would like but if you are on a newer software version (4.4 and above?) it doesn’t matter anymore. You just log into the library in the Silhouette Software and you will be able to use your upgrade on any computer. I believe it is still limited to three at a time so it will log you out of the first one when if you log into a fourth computer.

Im sorry it took so long to respond. I need to update my post with some pictures of photos and more things I have printed. To get the best prints, just choose the setting for the material you are printing on for example matte paper for printing on cardstock or glossy for printing on glossy photo paper and you can choose standard or high quality. I have also found that using good quality photo paper matters if you are printing photos. I tried some dollar tree photo paper and it didn’t turn out nearly as nice as the photo paper samples that came with the printer. As for the thickness of the paper, I have printed on Posterboard but I am not sure the weight. It isn’t the foam core board but the thick flexible posterboard like from dollar tree. I’m not familiar with the 140lb. Watercolor paper. It would go through the rear feed slot if it did.

I connected to my MBP M1 via the USB-C and works like a charm. just plugin

I got it from Amazon. Here is the video about the table. th-cam.com/video/OJ-JRjfZa5s/w-d-xo.html the link is in the description.

Unfortunately a Chromebook is not capable of installing or running Silhouette Studio software. Your computer needs to have a windows or Mac operating system and meet the minimum system requirements. There is a mobile app called Silhouette Go that you can use on an android or iPhone or iPad but it is quite limited. You would need a Cameo 3, Portrait 2, Cameo 4, or Portrait 3 machine because those have Bluetooth capability. Let me know if you have any other questions.

You are welcome! Happy to help.

Unfortunately Word wasn’t included with my computer so I don’t use it anymore but thank you for sharing. It is good for people to know different ways to use glyphs.

Thank you 😊

You are welcome! I know a lot of people get hung up at that part.

Oh no! At 4:52 in the video I show how to open the rear slot. Lift the cover, extend the support, lift the inner cover piece, slide the blue guides apart to the size of your material. Insert the material and slide the blue guides towards the material if needed so they are along side the material. Then lower the inner cover that has the little roller on it. That part has to be down for it to print. If the LCD screen prompts you to choose your material and size, go ahead and do that. Then in your printer preferences on your computer select the material you are using and the size and print quality and then under Paper Source choose Rear Tray. It should recognize that there is something loaded but I like to make sure it knows. Then select OK and then Print. I hope that helps. If it still isn’t working, let me know which part isn’t working and what you are printing on and what size it is and I will try to make a video for you. I will probably try to make one anyway but I would like to address your problem if possible.

@@LittleGraySquirrel thank you! It was the paper size not matching the settings on the printer. Walked away for a few hours and came back to it and figured it out!

@@erinduckworth6367 I’m so glad you figured it out!