วีดีโอ

Amazing to me this guy has not electrocuted himself or burned his house down.

So, when you switch the light off at the wall switch, light goes off. Then you switch the light on via the Shelly. Switch position is in off, do you have to switch on and off at the wall switch to turn off the light then?

Just got the Shelly 1PM, does this work for two way switch?

Thank you for your video. I bought Qty (2) shelly 1+ and Qty (2) Shelly 2.5. The videos that shelly has do not in my opinion explain well enough. Every other video I have seen not from shelly are using wiring in Europe or the middle easy, and rarely have audio other than some cheesy music. It was awesome to see this installed on North American wiring and having someone explain it as they go. 😀

I watched a bunch of videos of how to do this. You are the first one I found that explains how the existing switch will function when one of these is installed. Thank you!

How did the switch and the shelly fit into the single gang box?

This should honestly be adopted as an official video. This is excellent. So much more clear than anything else I've seen!

Wouldn't it be easier using staraded wire with end tinned with solder?

A few days ago I made a post of thanks for the video. After installing the Shelly 1pm to control a light switch using a motion detector triggering mechanism everything seemed to work. But now that the Shelly has been installed for a few days I noticed a problem. When I turn on the light manually it will only stay on only as long as the motion detector is detecting motion. This tells me the wiring, as described, is not quite correct if you want to be able to manually turn on the light and keep it on as long as you want. So, just a word of caution.

Thank you very much for spending the time to make this video. I made a screen shot at 4:10 into your presentation, took it to the outlet and wired it exactly as you suggested. Worked the first time!!

Excellent video! Wired my first light switch today and it works! The directions that came with my Shelly 1 PM are completely inadequate and without your video I’d definitely be guessing where things go. Thanks again!

Can you please share the wire connectors you are using? I want to order from amazon but not sure how to search for them.

Hi, interesting video. What is the status or your findings with those shellys in your wall one year later (before I convince my wife we need to smart or installation)?

You filmed this with a Wyze camera? That is next level. Awesome

I have a 2 pull chain ceiling fan without a wall switch. I was thinking about using the 2.5 to control the lights and fan for it.

Can you provide a diagram for a shelly 1 install for a light that's hardwired without a switch?

Never mind i found it at home depot

please get a microphone

Like the use of the Wyze cam for the video. i have them all over my house and the sensors also.

does electricity need to be off first?

For a switch on a 15a breaker, how do you justify in terms of safety the shelly 2.5's 10a rating?

Can I install it without the white wires?

These devices are designed terribly. There is no reason I should have to feed the device with 2 hot wires, and send another hot wire to the switch. It should be 1 hot wire to the device, and then a wire from the device to the switch, and a wire from the switch to the device. My gang box looks like a fucking abomination right now. Terrible, terrible design.

My Shelly 1 v3 is the new UL listed one and not the PM or power monitoring. The terminals are labeled O, I, SW, L(-), and N(+). I am trying to figure out the proper wiring for that myself without the L and LI. Anyone have any suggestions? Thanks

Can you pleae show a diagram for connecting two light switches operation individually

Thank you for the video; this is so much better than Shelly’s documentation

Not the recommended way to connect these devices. The Manufacturer outlines "L" goes to hot and "LI" goes to hot side of switch. Not sure your results but wanted to make sure viewers understand you are explaining outside of recommendations. One would assume "L" and "LI" to be a power bridge but I cannot confirm as I have not disassembled any. Your method also increases wire density in box.

Lol, this diagram could be a bit more clear. You know you can use straight lines and its not necessary to draw pictures of cables and connectors.

Nice. Thank you for the video

I agree with Javier about looking forward to the next video. Any idea when you might have it available?

I have mine wired in a j-box, ready to install to operate my pool light. But the software refuses to connect to it. The Shelly website wants me to chat with a guy in Bulgaria (???) at some crazy hours. Any hints as to a workaround?

Would it be possible to get a diagram of the installation?

Do you know how these devices are treated for box-fill calculations? I'm working in an environment where regulatory compliance is strictly enforced. I tried to use one of these and both the inspector and supervisory EE refused to sign off. No box fill data, no use. Period.

Can you make a new video tuoturial wiring Shelly 1PM to receptical with diagram? Thanks.

Where you get the plugges used for the three way connectors. can you add a link.

Hi! I am looking forward for next videos with shelly on light switch real installation. I am not electrician so i do not know installations on depth. I have installed a shelly 2.5 in one of my window covers and working excellent in shutter mode. Congratulations for your channel!