- 86
- 1 335 541
Jonathan Chow
Australia
เข้าร่วมเมื่อ 12 ธ.ค. 2008
Building and breaking cars since 2010.
The Honda D SERIES CUP heads interstate! // 2024 RD3
Welcome to Round 3 of the DSC as we head down to Winton Motor Raceway to battle it out with the Victorians.
Join The D Series Cup Facebook group: share/g/LZuuEasLKfrwhejm/
Join The D Series Cup Instagram page: dseriescup
Join The D Series Cup Facebook group: share/g/LZuuEasLKfrwhejm/
Join The D Series Cup Instagram page: dseriescup
มุมมอง: 2 263
วีดีโอ
D SERIES transmission upgrade - gearbox step by step tutorial // D16 MFactory LSD
มุมมอง 2K14 วันที่ผ่านมา
Without a doubt the most underrated performance upgrade for the D series engine. In this video, Ram Daftar from Grofty Industries takes us through the process of upgrading the factory D series transmission.
Turbo D16Y4 1:37.6 | D SERIES CUP 2024 RD3: Winton Motor Raceway
มุมมอง 59021 วันที่ผ่านมา
Full D SERIES CUP Round 3 coverage coming soon! Here is my PB lap over the weekend. Bit of a messy lap but was my quickest of the day. Stock D16Y4 GT2860RS - 10psi - 135kw MFactory Helical diff MFactory short ratio gearset A050 215 50 15 F 205 50 15 R
How to install a REAR VISION MONITOR on your 4x4
มุมมอง 1.9Kหลายเดือนก่อน
In this video, we go into detail on how to install a rear vision monitor. This has made reversing a whole lot safer, taking the guess work out and easy navigation through tighter areas. Parts used in this video 1) Elinz 7" DVR monitor www.elinz.com.au/buy/7-ahd-monitor-car-ccd-4pin-reversing-camera-1080p/M7AHDRV108010M 2) Elinz suction cup mount 3) Neewer magic arm www.amazon.com.au/NEEWER-Flex...
5 minutes of LOUD rotaries at 7's day RX NATION meet
มุมมอง 9792 หลายเดือนก่อน
How sick is the rotary scene in Sydney?! A few minutes of rotary bliss captured at the RX NATION meet in Sydney, Australia.
HOW TO DIY a patch loom for standalone ECU (D16Y4 - Haltech Elite 550/750)
มุมมอง 2K2 หลายเดือนก่อน
Following on from the turbo D16 build series, this was a highly requested video, so i made sure to include as much information as possible. Don't want to make one? No problem, i am selling these on my website. www.jcyt.com.au/shop Parts used in this video - ECU header 178764-1 (3 receptacle) OR 174917-6 (2 receptacle) - Assortment of 14-20g cable - HT-030009 AMP 34 pin plug and pin set - ECU he...
We bought a retro TOPAGEE camper for our travels!
มุมมอง 1.4K3 หลายเดือนก่อน
It's been far too long between campfires. Welcome to our "new" little camper!
D SERIES CUP 2024 Round 2: Pheasant Wood Circuit
มุมมอง 1.2K3 หลายเดือนก่อน
The D SERIES CUP heads back to Marulan for Round 2. Join our D SERIES CUP community: groups/736957580697045/ New D SERIES CUP shirts available on the website www.jcyt.com.au/product-page/d-series-cup-long-sleeve-track-t-shirt Round 3 heads down to Winton Motor Raceway on August 25. See you there! FB event: e/4qzvko7QS
LandCruiser 79 series LONG TERM REVIEW - 2 years on...
มุมมอง 19K5 หลายเดือนก่อน
A lot has changed on Simba since my 5 month review. In this video, we revisit the 79 series, all the new mods and my thoughts on the future. Enjoy!
D SERIES CUP 2024 Round 1: SMSP
มุมมอง 3.6K5 หลายเดือนก่อน
The first round of DSC is held at Sydney Motorsport Park (Amaroo). A new circuit for most of us as an extension off corporate hill on the better known GP circuit. With some decent elevation changes and tight corners, this has become a favourite for the D series crew and we can't wait to be back!
TURBO D SERIES easily makes KSWAP power 💪
มุมมอง 27K6 หลายเดือนก่อน
Welcome to Part 5 of this video series where we head down to TuneLab Racing for the final tune. The civic is running a Haltech, and what better place to be than on the Haltech dyno!
D16 TURBO first start and drive - SHE RIPS!
มุมมอง 19K6 หลายเดือนก่อน
In this video, we start the civic for the first time with the new turbo kit and take it for a road tune. Oh boy she sounds so good!
EASIEST D series turbo FUEL INJECTOR/PUMP upgrade
มุมมอง 5K6 หลายเดือนก่อน
EASIEST D series turbo FUEL INJECTOR/PUMP upgrade
Boosting my D16 with a GT28RS - TURBO INSTALL AND FAB
มุมมอง 8K7 หลายเดือนก่อน
Boosting my D16 with a GT28RS - TURBO INSTALL AND FAB
How to build a 300HP D series turbo kit
มุมมอง 27K8 หลายเดือนก่อน
How to build a 300HP D series turbo kit
BEST COFFEE MACHINE setup in a 12v system - everything you need to know!
มุมมอง 4.6K8 หลายเดือนก่อน
BEST COFFEE MACHINE setup in a 12v system - everything you need to know!
How to DIY a PROFESSIONAL 4WD 12V setup (from start to finish)
มุมมอง 41K9 หลายเดือนก่อน
How to DIY a PROFESSIONAL 4WD 12V setup (from start to finish)
D16 EK CIVIC | Pheasant Wood Circuit | 1:02.36
มุมมอง 77410 หลายเดือนก่อน
D16 EK CIVIC | Pheasant Wood Circuit | 1:02.36
Honda Civic EK - PROJECTOR retrofit to OEM headlights full installation guide
มุมมอง 31Kปีที่แล้ว
Honda Civic EK - PROJECTOR retrofit to OEM headlights full installation guide
79 series takes on the infamous Firetruck Hill
มุมมอง 1.2Kปีที่แล้ว
79 series takes on the infamous Firetruck Hill
Planning my 79 SERIES DREAM 12v canopy setup!
มุมมอง 6Kปีที่แล้ว
Planning my 79 SERIES DREAM 12v canopy setup!
RACEONLY IGN1A upgrade - RX-7 makes more POWER everywhere!
มุมมอง 3.7Kปีที่แล้ว
RACEONLY IGN1A upgrade - RX-7 makes more POWER everywhere!
10 RX-7 owners share their ROTARY DREAM!
มุมมอง 2.2Kปีที่แล้ว
10 RX-7 owners share their ROTARY DREAM!
500HP fuel system upgrade on the RX-7 ft. Radium Engineering Surge Tank!
มุมมอง 3.8Kปีที่แล้ว
500HP fuel system upgrade on the RX-7 ft. Radium Engineering Surge Tank!
LC300 steering wheel upgrade in 70 series with complete wiring guide
มุมมอง 24Kปีที่แล้ว
LC300 steering wheel upgrade in 70 series with complete wiring guide
Thank you for your video. it really help much for my ek project. may god blessed you bro.
Phenomenal piece of engineering. Rotary engines are wonderful 🔥❤️
What are the specs of the dekagram?
15x7.5 +35 205 50 15
Nice to see the D series still getting some love in your part of the world. Dope content
Just curious. Do you wish you scuffed up the housing and the chrome piece you put around the retrofit and painted them gun metal grey?
hi mate I never thought of that actually! I'm not sure if that'd look a bit too grey. Actually if i was to do this all again, i'd use a shadow chrome finish. Someone here has reached out and recommended an acrylic model paint from Tamiya.
the engine built???
Stock D16y4 unopened
love the detailed video! quick question, why the 80a CB from the Lith battery to the Manager 30 and how did you come about that? As im abit confused because Redarc say 40a. Thanks
Thanks for asking mate, got me questioning myself haha I went back to the manual to see what they've recommended. Check the TVMS 1280 manual under BCDC connection Page 21 and system layout on Page 13. There are diagrams which should help you. The Manager30 connects to the battery through the TVMS distribution box and no external fuse is required. There is a 50A charging fuse already installed in the TVMS. As the TVMS is capable of output up to 80A, that is why i have an 80A CB between the TVMS and the battery The 40A CB i have installed sits between the starter battery and the Manager30 as it is capable of drawing 30A from the alternator. I've actually seen it draw more than 30A, so 40A CB is perfect for this connection. Hope that helps?
@@JCYT mate that's helps plenty. You're a legend
Great content as always
Hurry up James Clay, get your car ready and take that P1 spot from Chow :P
Weird....On E85 10lbs and just headstuds I made 236hp
American dyno? Our dynos read considerably less in Australia
Save the D series 🇯🇵🏁
We need this here in the USA
Great day! Good work at documenting the event as well as the builds
Yewwwwwww
🚀
Hope you guys enjoyed the vid! If you want to join us, we are a group based on the eastern side of Aus. Join our FB group for more info @D SERIES CUP See you at Luddenham Raceway 🤙
That silver EK is mint!
Awesome vid and great driving, really wish u took a look at that 3rd gen, looked sick
There is a killer 3rd gen that’s part of the DSC. Owned by Honed Developments. Should be in a couple of Jonos previous videos
Love this so much guys. All our d-series are long gone now so when I see this it really is something special 😢 makes me so happy to see. Thank you for keeping it alive ❤
Ive been planning to go K series and ditch the blueprints for the JDM D15B Vtec engine. But its videos like these that make me want to keep it and see the build through
Up the D series 🙌
Cracka ep bro 🔥.
Franklin's EK is really nice.
Agree
Wow. What was that really loud cool car at 26:39 ?
Looks like fun🔥🔥🔥🔥
Better yet get plumbers string , a small steel nut and use a rare earth magnet with a rag . Complete control with ally can go up down round corners for miles 😎
That's a good idea! Will have to try it out
What is the spark plug gap?
0.028" for all my turbo hondas
Do you guys have Ek coupes in Australia? Great content, thank you!!
Nvm, saw one in this vid!
we do have coupes in aus, but not many!
Will this work on 97 civic lx?
Sorry mate I don't know the different variations in the USDM market.
I've been looking to turbo my civic, everyone says don't do it because it's my first car but I'm all about bad decisions, this definitely helps and this video has truly given me the confidence to turbo the car🙏
Thanks for the feedback! You'll love the car mate
Esse motorzinho não tem velas de engiinicao?
What is your stereo model
It is a Joying unit
@@JCYT Can you give me the detail. I would love to buy the same model
That is SO clean. Thanks for the very detailed install!
Thanks mate appreciate the feedback!
So often we here in America, get up grades that’s confusing and garbled. Yours…refreshing and detailed. Oh…by the way, it was a little offsetting to hear the British accent coming from a person of Asian descent as does the American accent. It just throws me off. Job well done.
Great video brother🔥 I just bought an FD with Haltech Elite 2000 and its running good but the coolant fan are not working. Any tips you can give to pin point this issue? Thanks in advance!
Hi mate! It was plug and play for me with the factory engine harness, however i don't believe the Elite 2000 came with a patch loom? Sounds like it could be a wiring issue. A few things you will need to verify. Connect to the ECU and check whether Thermo Fan control is active under engine functions. The thermo fans are powered by the fan relay in the engine bay which is triggered by one of the DPO from your ECU. You need to check this under the wiring tab and trace the DPO wire to the fan relay with a multimeter.
First off, this is a great tutorial, but unless you have access to a JDM/EDM stereo fascia with intact A/C vents; DON'T DO THIS. USDM vents DO NOT FIT. You will wind up with 2 ugly, gaping holes in your dash, that is going to cost you a minimum of $150 to fill them with the proper sized and imported AC Vents. I just UNDID my 9 inch headunit and ac relocation for a stock set up with a true single din android stereo, and it looks 1,000 times better.
Hi, would I be able to wire this up on the face-lifted 79? Thanks 🙏
Hi mate I don't see why you couldn't. As long as it uses the same ISO harness which i believe the facelift and prefacelift share.
Great video as always. Fongpei what’s that red light on the cluster when you are on I think boost?
I've forgotten your IGN haha It's the handbrake light which usually triggers with low rear pad level. But it has a new pad and disc at the rear now so i'm not sure what it's about. It switched on with hard acceleration which is pretty cool
Remember to wear gloves when doing this stuff, contact dermatitis is no fun and only gets worse with more exposure
Hopefully, We can get a better testing video on your gear box upgrades. Some in car videos actually ripping would be awesome !
We've taken it racing last week and it was amazing. I'll get a video out shortly of it. Here's a quick in car th-cam.com/video/UalgUqy60qs/w-d-xo.html
Will you be upgrading to a haltech 750 or 1500 to get the A/C functional again?
Hi mate No plan at this stage but once my RX-7 goes for the new Haltech S3, the civic will inherit that 1500. The other alternative is run an expander IO box OR purchase the haltech dash which will give you additional AVI for AC
What year are your cupholders? I have a US 98 and mine have the lid and otherwise don't look like yours?
Hey mate They're actually just some ebay ones i screwed into the side haha My model didn't come with the slide out cupholders. We only got those in the SIR variant
@@JCYT Ok, thanks. That makes sense.
New box sounds good
Love hood, does the hood lock ring ( the part that hood lock holds on to) made of metal??
Hey mate Yes it is!
what is the difference cruising on the freeway? How many km difference @ 120 is there?
Hi mate I'm sorry i don't remember the factory rpm @100 With the new gearing, i am sitting at 3800rpm @100kph. I would expect it to be around 4000rpm @120kph
@@JCYT ok, that’s pretty close to the factory gearing in my kids 94 integra.
approx how much would this cost to get done and to buy the gearset?
Hey mate We did a group buy so the parts were quite cheap. $1100 helical diff $1100 gears $160 bearings $40 detent springs Labour - approx 4-6 hours
@@JCYT thanks for the info
Gday mate I’m currently building my own 12v setup in my aluminium canopy and have got all my wiring sorted. Positive of dcdc charger through 60amp fuse to battery Negative of dcdc to battery shunt P- Positive of my 3000watt inverter to 450amp blade fuse then to the positive of 200amp hour lithium battery , negative of inverter to the P- terminal on shunt Negative from the battery to the B- of shunt Then I’m stuck with the last little m8 earth bolt on inverter where do you earth that to and what size cable? Cheers for your help
38:22 Motul FF-LSD Type 2!
Noooo
Ram is pretty sweet guy 😉
is that head unit LTE capable
Yes it is 4G
Nice!