วีดีโอ

Thanks for the amazing feedback.👍👍 However, the water heaters in the video, we're used as dummy resistive loads to test the concept....that's all. Thanks again! The Innovati0n Lab 💥 www.theinnovati0nlab.com

Thanks a lot! We appreciate your support. The Innovati0n Lab 💥 www.theinnovati0nlab.com

Thanks for watching the video and leaving feedback.👍👍 However, what you said is partially relevant to buck-boost converters. The only disconnect is that what was tested in this video was a constant current BUCK converter.....not a BUCK-BOOST converter - they are not the same thing. Also, regardless of what converter type, you still need the current adjustment function that these constant current converters provide as it enables you to adjust the charging current to the level recommended for your battery. Charging your batteries without current adjustments is dangerous and could over stress your batteries.....PLEASE DO NOT DO THIS. PLEASE PAY ATTENTION TO MY TUTORIALS. Please, what the video below where I explained how the charging process works.👇👇👇 th-cam.com/video/WDWJ77WWkXc/w-d-xo.htmlsi=GgT77t35RSnMFK73 I hope this helps. The Innovati0n Lab 💥 www.theinnovati0nlab.com

​@@theinnovati0nlab782the point is if you don't use it for that purpose there is no benefit.

Thanks a lot for the great feedback and for supporting our channel. 👍👍👍 I provided the schematic in this video, and if you watch the video on a big screen, you should be able to see everything.😊 I will upload this schematic to my website soon. Answers: PWM controller: TL494 MOSFET Driver: TC4420 MOSFET: IRFP264 Frequncy Range: 30 to 60KHz I hope this helps you. SUCCESS WISHES TO YOU. The Innovati0n Lab 💥 www.theinnovati0nlab.com

It's the same exact music for the first 5 minutes and repeated later on. Download the epidemic sounds app or go to their website and search for the track. 💥Original track title: PARTY BANGERS With an Epidemic Sounds subscription, you can download the entire stem package of the song and edit it as you want.....so what you heard was the different variations that I made out of the original track during the video editing. Some instances I amplified some instruments, some instances I removed stem drums,...some instances I removed bass...and so on. 😊 Too much detail goes into making these videos!😊 Thanks for the appreciation. Let me know if you have further questions. I am always happy to help - as long as you are sharing and promoting our channel😋😂 👍👍 The Innovati0n Lab 💥 www.theinnovati0nlab.com

Please don't ask repeated questions that I have already answered. Check my feedback to your earlier comment. Thanks. Respectfully.

@@theinnovati0nlab782 I know. You only answered the initial music and not the one specifically at 0.53. Pls Check the question carefully.

I am glad you like the music. I love it myself as well.😊 It's a paid royalty free soundtrack from Epidemic Sounds. The name of the track is 'Party Bangers.' You will need to get a subscription from them to be able to use it in a shared online content. Thanks for the feedback. The Innovati0n Lab 💥 www.theinnovati0nlab.com

Wow. And the one at 0:52? Which one is that?

Great question. I love the way you are thinking outside the box. Unfortunately, that concept will not work with these converters they are not input to output isolated. I hope this helps. The Innovati0n Lab 💥 www.theinnovati0nlab.com

You could try what I have shown in my series converter video series. Please check out those videos on our channel. CAUTION: I would not recommend connecting more than 2 converters in series as my videos showed.

You are absolutely right. Please watch the follow-on video where I showed all the power losses at different input voltage levels. 👇👇👇 th-cam.com/video/haGmAmpqNAw/w-d-xo.htmlsi=oNAVdJi_8sAkfuLx I hope this helps. The Innovati0n Lab 💥 www.theinnovati0nlab.com

Thanks for the interaction. However, could you elaborate a little? Thanks The Innovati0n Lab 💥 www.theinnovati0nlab.com

As I understand it with those converters the limiting factor is the input current so if you are feeding in 12v you are limited to around 400W if you want it to be reliable. Double the input voltage and you can double the power.

I provided a detailed explanation in the full video. Please watch the full video th-cam.com/video/haGmAmpqNAw/w-d-xo.html

That is correct, but they also cost 12 to $25. I have explained my 6-step process for using these cheap constant current converters as battery chargers in a few videos. Please watch the video below.👇👇👇 th-cam.com/video/WDWJ77WWkXc/w-d-xo.htmlsi=dGbH4D1Y0f9y2Hkd I hope this helps. The Innovati0n Lab 💥 www.theinnovati0nlab.com

Wonderful! Thanks for watching our videos and for leaving a comment. I hope you are a subscriber. The Innovati0n Lab 💥 www.theinnovati0nlab.com

I have made a video about paralleling the converters. I also made a video series on how to connect them in series, how to hack them for more power, how to use them for solar...etc. Please check out the videos on our channel. Please feel free to browse through our channel. Lots of great content on these converters. The Innovati0n Lab 💥 www.theinnovati0nlab.com

amzn.to/3ZwHULk

Thanks for being a valued subscriber. However, I only share schematics and some 3D design files for my converter fixtures. Some of these you can download from my website for free. The PCB design files are too expensive and take a really long time to develop and will not be shared. Thanks. The Innovati0n Lab 💥 www.theinnovati0nlab.com

I showed it in the video. But I will see if I can upload it to my website in the near future. Stay tuned. The Innovati0n Lab 💥 www.theinnovati0nlab.com

👏👏👏 Thanks for sharing! I am very happy to hear this.👍👍👍 The Innovati0n Lab 💥 www.theinnovati0nlab.com

Lol, definitely very funny! I like it.👍👍 I certainly hope my videos would encourage and not discourage you. You made some good observations, but the stand was 3d printed out of PLA plastic, and my goal was to keep it a simple design - something to hold up the converters while granting some air flow access to the cooling fans at the bottom. Also, here, I really don't care much about anyone's academic qualifications. I always recognize and respect good ideas coming from anyone. What I generally can't stand are bullies and trolls.😊 Thanks again. The Innovati0n Lab 💥 www.theinnovati0nlab.com

@@theinnovati0nlab782 Any time one of your videos discourages me from DDS, it's a good thing.

Yes, you can. However you will need a bigger battery because your 14AH battery would only last for a few minutes. Please watch the video below. 👇👇👇 th-cam.com/video/haGmAmpqNAw/w-d-xo.htmlsi=ww850eb-rkTtFvQ1 The Innovati0n Lab 💥 www.theinnovati0nlab.com

Thanks for the wonderful feedback! Much appreciated. Safety is the biggest consideration in all my projects and videos. As I explained in the full video (watch it of you can), for the converters to work in a series connection, you have to isolate the chassis grounds from the 12V DC return. Not doing this means that you are essentially shorting one of the power supplies....and this is why you may have experienced a failure. I have used this setup in many of my projects and video.....it works remarkable and reliably well. I hope this helps. The Innovati0n Lab www.theinnovati0nlab.com💥 www.theinnovati0nlab.com

Wonderful idea! I have been able to connect 4x of these power supplies in series - in some of my videos - it's pretty much the same concept shown in this video, and it works. However, using these 750W server supplies, a 48V setup will be a 3000W supply instead of 2000W. 😊 I hope this helps. The Innovati0n Lab 💥 www.theinnovati0nlab.com

Why?

Please watch the full video. This is a simple concept that everyone should be able to do. Also, we are not building any power supplies from scratch. We are simply repurposing some old server power supplies that would have ended up in landfills fills. I hope this helps. The Innovati0n Lab 💥 www.theinnovati0nlab.com

Thanks for the feedback. Can you please elaborate? The Innovati0n Lab 💥 www.theinnovati0nlab.com

Please watch the video. The schematic and a full design explanation were provided. A lot of hard work goes into making these videos. Watching the videos is a small way to help our channel with the TH-cam algorithm. Pause the video , copy the schematic, do a screenshot - whatever works for you. Thanks. The Innovati0n Lab 💥 www.theinnovati0nlab.com

​@@theinnovati0nlab782 the circuit diagram in the video was not clear to see

It is still being developed. Please stay tuned. The Innovati0n Lab 💥 www.theinnovati0nlab.com

I am not sure I fully understand your question. Please watch the full inverter test videos. 👇👇👇 th-cam.com/video/JX6VvVNUBrs/w-d-xo.htmlsi=rofUgmhE5wmyOK8l th-cam.com/video/aTTJ_l2KS5k/w-d-xo.htmlsi=Ns483QBsHzscQWRX I hope the videos will provide the clarification you need. Thanks! The Innovati0n Lab 💥 www.theinnovati0nlab.com

This is the prototype. I am still working on the design. Thanks a lot, and I appreciate your interest. Please stay tuned for future updates. The Innovati0n Lab 💥 www.theinnovati0nlab.com

This is the prototype. I am still working on the design. Thanks a lot, and I appreciate your interest. Please stay tuned for future updates. The Innovati0n Lab 💥 www.theinnovati0nlab.com

This is the prototype. I am still working on the design. Thanks a lot, and I appreciate your interest. Please stay tuned for future updates. The Innovati0n Lab 💥 www.theinnovati0nlab.com

This is the prototype. I am still working on the design. Thanks a lot, and I appreciate your interest. Please stay tuned for future updates. The Innovati0n Lab 💥 www.theinnovati0nlab.com

@@theinnovati0nlab782 As soon as is for sale, I will get one. I purchased 3 of the ones you use but the 1800W version and purchased the mosfets IXFH80N65X2 TO-247 650V 80A, diodes you recommend, capacitors and everything except the Inductor parts that I am waiting to be shipped.

Very true.

Unfortunately, I don't control the ad placement on the videos. However, I have been creating awareness in my videos that free energy is a fake concept. 👍👍 Thanks for being a supporter of our channel. The Innovati0n Lab 💥 www.theinnovati0nlab.com

Thanks for being a supporter of our channel. Much appreciated. The Innovati0n Lab 💥 www.theinnovati0nlab.com

I hear you. Great suggestion.👍👍 I will definitely see how I can make it happen. However, I do it as a weekend hobby.😊 Putting one together for the video is one thing.....putting multiple together is something I may not have the time to do for now.

Thanks for the wonderful feedback. I am working on the design. Please stay tuned. The Innovati0n Lab 💥 www.theinnovati0nlab.com

The MOSFET used for the prototype board is IRFP264 because of its high drain-to-source voltage rating. In the finished design, I will be using a better MOSEFT with a lower RDSon. As for the diode. I will have to check my notes. Stay tuned. The Innovati0n Lab 💥 www.theinnovati0nlab.com

Please elaborate.

Thanks for the great feedback. However, this goes deeper than voltage in balance at the analytical level. Startup transient response of asynchronously paralleled converters is a nightmare - especially under heavy startup loads, and there are a lot of variables to consider. - conflicting independent control loops. - Load startup response - System output power level - Load to converter system impedances...etc I hope this makes sense to you. The Innovati0n Lab 💥 www.theinnovati0nlab.com

Great feedback. However, the experiment was to see the performance of this cheap regular buck converter as a SOLAR battery charger. I made an initial video that shows how to use these buck converters the conventional way that you were referring to. Please watch the video below. 👇👇👇 th-cam.com/video/Wabe5f6sUgo/w-d-xo.htmlsi=kZfcMfCiBu2N3iq1 Analogy: We all know that a vehicle tire is built to traverse roads. However, if you want to conduct an experiment to know if the same tire can be used on a cheap 'float plane' design... you would test it on water, correct? I hope this makes sense to you. The Innovati0n Lab 💥 www.theinnovati0nlab.com

Great question. That very converter failed when I tried using it as a solar charger. It didn't work well. I hope this helps. The Innovati0n Lab 💥 www.theinnovati0nlab.com

I made a video for my batrery build a while ago. 👇👇👇 th-cam.com/video/wrvrV8frSsY/w-d-xo.htmlsi=c2PsaWlUfGtY1XQO I hope you find the video helpful. The Innovati0n Lab 💥 www.theinnovati0nlab.com