วีดีโอ

Have you thought about making a adaptor plate so kramer can use all the tractor attachment and tractor can still use them too , keep them all on Greys brackets like

Good video hope you get the ford sorted can't believe you can hold the electric fencer when its on id be yelling 💥

Fit looking heifers are they beef or for breeding?

You might be as quick with 2 lengths of 400 x10 mm flat and making a backing plate

Keep a look out for an adapter plate to fit the Kramer that takes Grays brackets, or have a go at making one and it would make interesting content!

Those loader brackets. It might be a bit of work in the short term, what you are planning, but it may a long term gain. What happens if one of the loaders go down in the future (Kramer breakdown when you want to muck out?). By having a spare set of brackets you can use between both loaders would be a help. Can you fabricate an entire adapter that goes between the loader and the implement you want to use? Seen this before on a larger shovel set up. Good to see the ole girl will be back in the blocks soon. 👍

Good one good old TH-cam 👍👍

Nice work. I find that sometimes you’ve just got to dive in. And you’ve increased your knowledge here👏👌👍

Job well done 👍

you get the job done and save a bit of money on the way thats all that matters dosent matter what other people think 👍

Don't knock yourself you manage very well thanks for uploading

Thanks 😊

get your self a flail mower

Put a ratchet strap around the length of the track, take the grease nipple out and tighten the strap up as much as you can. That will push the grease out and get the track slack enough to slide off

Nice honest video don't worry about making mistakes as my late dad used to say the man who didn't make mistakes never did much 😂

Good news on the TB test 👍👍 your stock are looking very good 👏👏

The cattle look amazingly good. Glad you passed your tb test

That bearing is in a sorry state what is the rest like 😂

Thanks Paul

Congratulations on getting a clear TB test

Your a good man! Takecare just subscribed 👍🥟🚜👍

Interesting subject. There’s also fail type toppers to consider and you could do with a front mounted topper to reduce driving on the grass you’re going to top. Often people drive to quickly when topping especially with fail types, all they do is roll the material (grass/ weeds etc) over.

Very nice looking Hay my late grandfather used to say a few bales of nice hay is good furniture to have about the place 🙂

Good job a fair few bales 👍👍👏👏

Lot of bales there get yourself a flat eight grab you'll get a lot more bales on that trailer thanks for putting up your videos appreciate the effort it must take

Nice vid.. iv just subscribed.. stay safe 🏴󠁧󠁢󠁳󠁣󠁴󠁿

Nice one good crop there 👏👏

Looks great hay.I always found that sheet on the rake to be a hindrance also.i was quick to remove it too.Did you do anything to with the 7610 clutch yet ?

Kuhn stuff is definitely strong, as for lifting up at the headlands, each to their own but we never lift it up at the headlands, albeit ours will pivot so no stress, talking about America, the three point hitch over there is not as popular with that as UK, drawbar is king over there, you can buy either a hydraulic lift or manual depending on how deep your pockets are, good luck with your tedder 👍

The woes of making hay we still make a small acreage in wee square bales for the sheep hard work 🥵

Depends on the crop and the stage of drying it's at imo. If your rowing up for silage and the crop is heavy not lifting on the headlands can leave your final swarth lumpy. If the crop is very dry running over the headlands multiple times can break the grass up to where the baler won't pick it up from the ground. Bit of trial and error and you'll see what works best for you :)

Before I retired I was a agricultural contractor for 50 years end of the road you pick it up same as you would the mower I'm rolling up if you just turned with it on the ground you're stressing it

Ford ten series were a great looking tractor, they have aged very well too 👍

Great job there a nice crop 👍👏

Kymco maybe reasonably good quads for the price

Great machine.

Good video the countryside where you farm is very nice what county do you farm in

Love your videos , reminds me so much of growing up on the family farm many years ago , similar tractors and machinery and nothing to sophisticated compared to equipment these days . Keep them coming 😊

Good video grass growth here in Ni quite poor it has been very cold lately especially for june

I think that was a good tool choice.People are too quick nowadays to disregard corded tools.

Our 7610 went the same way it turned out the clutch was just worn out hedge cutting and old age of course had to replace the complete clutch and the shaft too as the splines were quite worn new seals too

Either way,it has to be split.

It sounds like bite the bullet and new clutch

If you let the clutch slip you will smell it and know for sure but if its the dual power you will not smell clutch plates burning

Had clutches in both my 6610s recently and when the tractor was split we found that the seals in the dual power was leaking and letting oil onto the disk causing it to slip, even with a good amount of life still left on the clutch it was soaked in oil

You can indeed run 2 filters on that head and it would be a good idea to. I do on my old tractor and when I needed to get the CAV pump resealed after 40 yrs service, the injection pump specialist said that they could tell that it ran 2 filters and they were changed yearly. HTH Have you owned her from new? she is a credit to you if you have! 🙂

Good video our 7610 was stopping and messing about it turned out the filter in the tank was blocked oh the joys

How many tractors do you have lol

Great to see your old style machinery still doing a grand job at very little cost and no depreciation

An extra 100 rpm will make an hugh difference to the job