วีดีโอ

Do you know how to change gearbox oil on my microcar virgo 3. And what oil i need.

Thanks so much, massive help ❤️

Recommended dilution ratio for this?

the springs fell out, I don't know where they belong, can you take a couple of photos, thank you

Excellent informative and very well explained, Helped me understand and work my machine so thank you very much.. Keep up the great work mate 👍🏻

Hi @KernowGarage do you still have this car?

Garbage 🗑️ no end of problems with this machine ,pump jets knackered,leaks everywhere,wont start,will start,then dies after 5 mins of use,total rubbish ,from what i gather most of the parts on it are from china not usa, probably why its crap

Cool, got a 1.3 Dynamic myself. The system can't detect the USB that's plugged in. Any ideas about that?

Had my 750i for 4yrs. The 1st engine seized after 4 uses but got a new one shipped free of charge. The fuel tank cap constantly leaks, so never fill it up or transport it in your van/car with petrol in. Uses oil fast and goes black after 20hrs of use so change your oil regularly. The Lance fittings are crap. No matter how tight you tighten them, they leak ( yes, I've also tried ptf on everything but alwaysleaks ) The plastic wheels broke so had to get none original hard rubber ones. The instruction manual is next to useless. When you pull the pullcord, even with no pressure, after 3 pulls, the recoil rips your hand off. Change the male plastic hose fitting for a metal one as mine snapped off. All of these problems but the pressure power is great and cleans better than any electric washer I've used in the past.

Excellent video!! Thanks very much. I'd decided that I was going to need to replace the catch mechanism - the door wouldn't close after I'd opened it and the 'catcher' just opened and closed. I came across this video while looking for some ideas about changing the mech and decided to have another go. If you get your hand up inside the door, you can feel the movement of the link between the door handle and the mech. A bit of GT85 and a 'help' of the movement of the mech and it's now fine!! You saved me buying a new mech (found one on eBay at £45!!), and the pain of trying to fit it as well. Thanks again!

Looks identical to the milwaukee. Is it a rebranding?

I've just got one of these there really powerful I just dnt no how to work the detergent in the front were it goes anyone no

Mine keeps cutting out and the reel is a bitch the reel up

Hello, I have a question. How hard is it to change locks? Mine is broken, someone at my carrepairshop told me, but it is too expensive to let them do it. I have gotten a secondhand 'new' doorlockmechanism. Want to try it tomorrow. You got any tips?

Shouldn’t you be using 0w/30 bmw recommended this for my e90 320d

And after ditching his Passat he didi no more videos, since Yaris is 1. boring 2. has nothing to work on.

Why would anyone watch a video of someone who can’t find the sump nut.

Many thanks. Are you still happy with it? Is it good to remove weed for paving black

Resurrection of a video: we bought my Nan's 1996 1.6lt Holden Astra 5 speed for my eldest to learn in (Holden- read Opel). Been fixing things here & there, 168,000 well looked after km's, interior came up like brand new after a Bissell machine clean. Radio & Clock no longer work, currently trying to get the aircon fixed for hot Quuensland summers. Solid lil' cars

Do you still rate it a year later bud? I'm after one for work

you might want to put ptfe tape every joint to start with no quality engineering here.

Would the same on a petrol version 320 i?

Does yours overheat or cut out after an hour of use?

Did you solve the leaking inlet? Cheers

You should cut a hole in a pop bottle for the drain & fill up .works great on motorcycles

Bought one of these today, why I left it so long I don't know, great bit of kit. Would also recommend .

Very good petrol washer I have one

I've bought this car. Just. In blue. 2012. VVTi. SR. Automatic.

Great video, told me everything I needed to know about this machine. I actually bought one on of these pressure washers on the strength of the content in your video- it’s brilliant I’m very happy with it, getting it fired up has a knack but once it’s running and warmed up it’s excellent. 100% better than electric- for those who are interested the engine is a Honda GX200 clone so is infinitely repairable, parts are easily obtained and abundant, plus you can buy an electric start upgrade kit if you really want.

😊The tail pipe for your saloon car is exactly the same as the estate Mk3 Astra

Hello! Do you need to empty the petrol too? If so can you do a video on this please?

Just can't beat letting the neighbours know you're awake on a Sunday morning 😂😂😂😂

Cheers dude.

Cheers for this video. It helped me with my decision to buy one today.

cv

Yes this just helped me out to find out its location. Now I can do the job.

Hi, the new rims you have….. there were thousands up and down the country at Peugeot dealers. Many models were sent out of the factory with those steel wheels (with those centre caps-e.g, the GTX model) but when a customer specified alloys, they were fitted at the dealership and the steels “disposed of”. The black centre caps are correct for the wheels and were retained by the close proximity of the wheel bolts. The centre caps were fitted to a range of Peugeots- 305 for example but were fitted to talbots also-they had a “T” in the middle though. The brakes are bendix. Check the pads are not seized and that that they have the stainless steel springs clips fitted correctly by pressing the edge of the pad towards to centre of the disc- they should spring back…… do NOT attempt to undo the caliper bleed nipple (steel )without applying a lot of heat first. It is likely siezed solid due to cathodic corrosion- fit NEW and apply copper grease to the threads and then proper bleed screw cap. ….. good luck ! I have one of therse stashed….it was my daily for many years…..

That's been driven in the salt and not washed off. Not very well finished for a car that cost over 12 grand new.

I've got this job to do, and it doesn't look like fun.

rinsed it off lol you could have blown my shead away with the presure of that washer.

I’m looking to get the same car, it’s 2012 and had done 89k miles I’d that worth buying?

Stop the vid at 1.51 and you'll see to the left of where the oil came out there is a bolt . You can see it between the wheel and the engine mounting rubber. This is the sump bolt, undo that and the oil will flow out without having to tip it and it should come out without going on the machine. You will be able to get your tray under there and catch the oil if you raise it up off the ground. EDIT, using the sump bolt also flushes out any swarf that's built up right at the bottom of the engine.

🙂Hi friend! On my 205 only de interior door handler does not work, I pull it but does not open the lock system. Does the GT85 in the plastic sort of rings will solve this too? Very thanks

Get a funel

It’s vented cap don’t fill the petrol too much all will do it

Can u get a turbo nozzle to use on block paving

An excellent video, very informative and easy to follow.... well done and many thanks.

did you get a turbo nozzie with it

I always forget how old those Passats actually are already. Good luck with the Yaris! Simple and care free motoring

Brilliant thank you for that