วีดีโอ

Hello Luke 👋, I normally use the blue loctite, the purple loctite is a little bit weaker than the blue, but I am sure it will work perfectly fine 👍

Hi buddy and thank you so much for the awesome comment!! I really appreciate the support! This is exactly why I do these videos is because I find that it's never an easy fit or there's always something you need to mess with for it actually to work right! And if I can just help one or two people, it's already made my day! I really appreciate the sub bro! It means a lot to me, thank you so much. They definitely don't pay me but at least I am slowly getting a sponsorship every once in awhile 😉

I'm not 100% sure what you're referring to, but if you are referring to the cables from the hood to the roof rack, they are made from some cable litters for fishing! You can choose from multiple colors and you can just cut to size, if you look carefully in the fishing store you will find everything you need to cut and crimp them 😉 And if you are referring do the scale ropes on the side of the roof rack, those are DIY made.

@@rcfungames exactly those. I like the look and I saw a nice kit for the 1:10 scale but not for the 1:18. I’ll keep searching at the 🎣 store 👍🏼

Thank you Bryan 🤜💥🤛 Well you did the right thing you are going to have so much fun with them!! Even without throwing upgrades at them they are really well built and perform extremely well. Thanks for watching bro and thank you for the awesome comment ✌️😉

Sorry bro, I don't quite understand! If there is anything I can help you with, please let me know? I believe in my videos I cover every aspect of every part I install.

Bro if you check another video of mine it will have that piece it's only because recently I got a copyright claim on that section because of a song I was using and they just cut out that piece of the video. I really am sorry for the inconvenience but every other video of me fitting the rims and tires you will see every stage of it. th-cam.com/video/VDfLrPzHXzE/w-d-xo.html

Sorry about that and appreciate the response. I’m a noob trying to figure out what the little dowels/rods are that came with the wheels. Couldn’t even find instructions on injora site but your video was helpful to me. Working my way through your videos now.

@@johnrothermel4552 the little pins, go behind the Hex that the wheel sits on. If you pull one off you'll see the pin behind it. You don't need to replace them they are just there in case you lose one! That's what I love about injora! They always provide extra hardware and bits that you didn't even need! But they always come in handy at some point. Thank you so much I appreciate you watching the videos ✌️😉 Like I say if there's anything you need just drop a comment I'll try and reply as quick as possible. 🤜💥🤛

Thank you very much bro 🤜💥🤛

Hi bro, thank you so much I've really enjoyed the whole process from upgrading to now customizing the look of the defender. I really appreciate you watching and I appreciate the enthusiasm in you're comment! These are the kind of comments that keep a person motivated. I really appreciate you bro, thank you so much 🤜💥🤛

Hello buddy 🤜💥🤛 Thank you so much! this was already fun and build. Thanks for watching and commenting bro 👊😉

Hello Jonathan, and thank you so much bro! It was my wife that put me onto AliExpress and she kept seeing all these accessories. Anytime bro I'm the one that appreciates the watch time and the awesome comment! I hope you have an amazing weekend bro 🤜💥🤛

Muito obrigado André 👊😉 O braço do servo é de 25T mas micro 25T O mais fácil é encomendar o braço com o servo e o apoio do servo. www.injora.com/products/injora-coreless-high-torque-micro-servo-for-1-18-trx4m-injs11

Thank you so much buddy 🤜💥🤛

Here is how I did the river! Don't laugh at the quality this was when I first started 😅 th-cam.com/video/4U9N75gUnZo/w-d-xo.htmlsi=Kp26GLAWe-bjD5XE Thank you so much bro, you are going to enjoy the process it is a lot of fun! 👊😉 I'm actually going to start doing some work on the course soon 😁

Hello Sophie and thank you so much once again for the outstanding comment!! I really appreciate it and I'm glad you liked the upgrade series on the trx4m rigs! It's been a lot of fun and there there are still going to be quite a few bills coming! But soon I want to get back to the 110 scale rigs. Thank you so much once again Sophie really appreciate your support. ✌️😉

Hi Sophie, it is great to have you back watching my videos! Your encouraging words and support is much appreciated! I will keep trying to do my best, so all I can say is thank you very much! ✌️😉

I'm sorry for taking so long to share a link, but he was still working on the final product. Here is a link to his Etsy account 3drcprintingdesign.etsy.com

Yes, in the beginning I tried putting 62 mm tires but they are just too big for the design of the defender body, yes the design from the Universal lcg chassis, it makes the body sit very high. I found that running 58 mm tires is the perfect size for the defender, I run 53 mm shocks, on the original lcg carbon fiber chassis, with the injora aluminum bumpers, which allows for perfect articulation and a good center of gravity. I honestly recommend for you to watch the Traxxas trx4 m Defender playlist, to see what I have done with mine from the beginning. You will notice I tried various different things but ended up going back to this setup because it works best for the defender. I'm working on another video today and I will mention this in the video. Hopefully talking about how I've got it set up will help you. Thank you very much for watching and commenting bro. 🤜💥🤛

In the last video I posted customizing the Bronco I mentioned what I thought about the differences between the two kits. After testing both sets for over a year, in the same type of conditions water dust sand rocks, the only thing I didn't do was run them in mud. I stripped them down recently, define that both have behaved identically. Which in my opinion doesn't justify the price difference from the injora kit over the Traxxas on! So in my opinion I would save a few bucks ordering from Traxxas and rather pick up from Injora. I hope that helps 👊😉

I am running the 370 motor with the reduction gears from Injora. Seems to work really good on this rig, hopefully I will have my hands on a 3s battery within the next week, so I can finally test the mb100 on a 3s battery! And I'm very interested to see how the 370 motor and transmission is going to perform on 3s Thank you so much bro I really appreciate it. And thank you for watching and taking the time to leave a comment. 👊😉

I would love to have done an upgrade series on one of them to! But they are still not available in Portugal, I have only just got my hands on the Ford F-150 trx4m When they are available I probably will purchase one and do a series on it as well. For now I am going to be doing quite a few different builds until it's available.

Anytime bro, I'm glad the video was helpful. I appreciate you watching and taking the time to leave me a comment. 👊😉

Thank you bro, I'm glad you still enjoyed it. I really like the mud flaps even if the letters aren't White, which wasn't difficult to paint them anyway. Now some of these accessories are really not well thought out! And the fact that they designed these things without even looking at the real thing, is beyond me! When I get a chance to go and do some shopping I will find some brake pipes and make my own. At least it all adds to the scale look even if it's not perfect! I also want to say thank you for watching and taking the time to leave a comment. Hope you have a good weekend! 👊😉

Thank you bro I'm glad you enjoyed it! Yeah I was definitely disappointed with the design of the exhaust, one it sits too low, second of all designing a box that completely conceals the real clip, is just stupid!! I have seen another one that the box is completely made from stainless steel and the exhaust pipes and it has an opening around the back, which is okay but it's still going to make it difficult as your fingers going to have to go over the axle to reach the clip. Why not just make some exhaust pipes that bolt on the side the same place as the mud flaps

Thank you buddy 👊😉

Definitely the defender is probably the most common trail truck, but I have kept all mine very realistic. My Bronco and my K10 is also a scale build. I really love a capable rig but I still prefer a scale truck to something that can climb like a spider! 😅 I wanted to cut my winch off but I then thought I might as well look online if not I will design my own grill and 3D print it! But I found that one on AliExpress and I definitely recommend it. Thank you so much for watching bro and I really appreciate the comment.

That would be awesome, I would like to fit winches to all of them! I am definitely going to look into that, thank you so much for the information! I always appreciate your visit and comment. Have an awesome weekend bro! 👊😉

@@rcfungames yup! 👍🏼

Dude thanks for the visit, and comment! but, the body almost weighs as much as the chassis now, and once I put the rest on it! its definitely going to need some more weight download to keep the vehicle from rolling all the time. I have been building Trail rigs for more than 15 years! I might be new to the small scale rigs!! Which I have only been working on for the last 4 years! I think I know how to keep the balance! To get the performance and realistic look when I'm filming 😉

@@rcfungamesFor sure! Wasnt meant as a sly comment or anything so sorry if i came of as a knowitall 😅 I only reacted because i hear ”LCG” all the time which (as you now then) is pretty detrimental to the scale look that these crawlers give! All well meant, sorry if it came across as anything else! By the way it’s an absolute looker of a car! Have you backed the body with black or something? Paint looks so good

🤜💥🤛

Hi bro and thank you so much for the awesome comment! Yeah the 62 mm tires are just a bit too big for the defender body, the Bronco can run to 62 mm tires because it's got bigger wheel arches. These are definitely the biggest tires I would run on the defender which is 58 mm. I am busy working on a few more custom parts on the defender, and I will take it out for a run today so you can see how it behaves with the tires, which I still haven't run since I fitted them. Just trying to catch up with a few things and then hopefully I will be able to dedicate my time to produce a few more videos. I've got so many cool projects that are coming, and I would really like to finish off my backyard course. I really appreciate you watching and commenting bro. 🤜💥🤛

Thank you Brett 😊 That's the problem I have, I don't leave home anymore!! and my wife knows exactly where to find me 😅🤣

Lol

Thank you so much Brett, it has been so much fun building these TRX4m's Finally getting my hands on a Ford f150 trx4m I am definitely late to the game as they've only just become available in Portugal. But at least I've still got one more to do a custom build on! I really appreciate the visit and the comment! 🤜💥🤛

Hello Seven 👋 It's great to see you again my friend ☺️ I always appreciate your visit and comment. I hope you have a wonderful day, and that I see you again on the next one. Greetings Ryan 🖖

Olá em Muito obrigado António, está a chegar às últimas alterações nestes pequenos. Mas tenho as mãos cheias, que eu tenho dois projetos de construção que vem nas próximas semanas. E o montão de peças novas que foram lançadas que eu tenho que fazer uma avaliação e teste. Agradeço sempre a sua visita amigo, um grande abraço 🤗

Muitos bons vídeos em breve nice❤

I must have done something wrong because now I see that when I move left right the front axle it almost get stucked. These are the diamond ones. Can’t figure it out.

This is happening on both cars, front axles.

Hi bro, that is awesome, I hate waiting for the parts but! It is an exciting day when they finally arrived. Sounds like you've done a good job, I don't quite understand what do you mean about the figure eight motion on the front wheels?! I have read your other two comments and you are saying that your front axle is binding? Is it because of the wheels? I need a little bit more information as I can't understand exactly what's going on. Sorry 😔

@@rcfungames Hi! Indeed it looks like binding. I will get home later and take a look again. When running free with the car upside down, without moving the wheels, I can hear a ruttle or something like that. I don’t think it’s the wheels. I will look again and get back to you later. Thank you!

@@rcfungames I still can’t figure it out. When I run without the front wheels sounds smooth. The wheels are not touching anything, by the way. Now I put only one rim, without the ring and the plate with screws (sorry, don’t know the terms) and when I turn the opposite way it’s making that sound again. Looks like coming from the shaft. I have opened the axles and they look ok. Is it possible to have something not quite straight and when I put the rim/wheel/weight on axles to spin incorrectly?! But on both fromt axles? They are the same model, only one black and one silver. As for the upgrades, I changed the chassis, links, shaft, shocks and axles and wheels.

Thank you Kyle 🤜🤛 They are extremely good looking and fun trucks! Hopefully next week I will get my mini ford F-150 Then I can finally do a custom build with it. I'm glad you like the video, and I really appreciate you watching and commenting bro! Have an amazing day ✌️😉