วีดีโอ

I know this vid is 4 yrs old, but those aluminum arms are gonna come back off if you bash it any. the plastic ones absorb the impact and really save the stubs from bending if you hit anything.

You left a 3300 KV stock Redcat motor in that thing and you're adding metal? You should've at least updated it to a 4400 KV or higher. You're not gaining anymore speed. And it's just a cheapie 2-pole motor not even rated for 3s. What's it have, a 45 amp ESC? I run a 150amp in my custom Volcano. And a 8th scale 4-pole racing motor that can almost use it all. I have two Volcano's and they're both all metal. Everything. One's a nitro. I hate to run them anymore. They take forever to clean. And the nitro is a grease mess. And they still eat axle shafts for lunch, and the pins on the heavy duties. So I run a Hosin X07, stock plastic with an 45amp 3s ESC to bash with. The 45 is plenty for the light weight plastic car. It comes with two batteries, a metal servo saver, metal servo arm, all metal drive line, oil filled shocks, metal front steering knuckles and back axle U brackets; very nice. It's a lot better truck than the Volcano ever thought of being. Seriously. It doesn't break, and you don't have to make it metal if it doesn't break. And it's only 200 dollars complete. You have to add the 3s battery. A Volcano with two batteries is over 400 dollars; and they do break. That's all a Volcano does is break, it's 8 year old technology and that's why you have to make them metal. They self destruct on 3s if you don't. I broke one of their cheap plastic chassis in half. You're certainly not going to replace that with plastic. So mine are fully armored and custom built. And I see you're well on your way of doing the same thing. And I can assure you, it doesn't end. The problem is, they get really heavy. 12 lbs I think. I have an 8th scale 4900 KV monster motor in mine. It's rated for 135 amps, up to 6s. The ESC is a 150 amp Hobbywing. And together, they eat axles shafts. Add in a gyro and a bigger pinion and that truck hits 80mph. You do realize the metal tie rods and upper control arms have a lot more slop in them than the original plastics. I went back to ball snap plastics because the gyro was having a tough time with the slop and wouldn't stop correcting. Snap balls have no slop at all, and they're still adjustable. That's what the Hosin comes with as well.

Both Redcat and Traxxas are both good. I dont believe one is better than other, it just depends on what you end up getting. I like redcat cause i got started w redcat. Some do traxxxas

4lo duh...

So I updated my arms and hubs to aluminum one my redcat and the drive shaft keep popping up what should I do?

Hello! I want to buy a volcanic epx pro, but something stops me before buying it, will the crown and drive shaft differentials withstand 3s? or in a short time I will wear gears? I know that I can go +35 mph (that without a doubt, but this truck resists that speed for long periods? As for gears? .. regards

"Neither one of these would pull a greasy string out of a fucking cats ass but.." And cut. That's a wrap folks.

I run my Redcat 3s with a 60 amp ESC and 3000kv motor. I changed the sprocket to a 64 tooth 24 tooth configuration. It's insanely fast.

Crazy party pinky nail 💅

I love ALL RCs But you CAN'T compare this redcat to Traxxas at least not this redcat.... That Redcat is SCREAMING I'm from China

Alsome guys you answered alot questions.

th-cam.com/video/GhFjUNgfNNs/w-d-xo.html What happen to my volcano brotha? Why it start clicking so much and go so slow now..?

th-cam.com/video/yQWJCb4P_cE/w-d-xo.html I love this truck!! It really Tears it up for what ya spend on it!!

Good

What was smoking???? Couldn't have been the tires, they were on grass and dirt!?!?! WTF? It's your money!

I had the same 102. Ran beautiful. Great tractor

With all the money you invested in this shitty truck you could have just bought a kaiju by now

don't that mess up the engines

It's all about the tires...

Do the 4.75 wheels rubbthe links

I’m looking to buy one with 170xxx they are asking 3500 what do you think. It’s pretty comparably to yours.

That jeep sound 🥵

Any follow up videos or photos of this Comanche? You put a lot of work into it and it was looking good.

What exhaust setup does the hemi got? Tks

To each is own, but every ttaxxas i have owned and raced held up nicely never any issues but maybe some offset gear mesh and shitty servos. I have a 2wd slash custom with well over 700 dollars in high end aftermarket parts and its been very reliable. Ive also own the epx drift, the gen 7, the blackout pro, and rampage, and rockslide. All of those redcats were either defective or junk. The gears were cheap and stripped easily, the servos were wayy too slow, the recievers constantly went to shit without water damage and i by no means run them hard or crash often so like i said maybe i got bad ones but i still think traxxas is a bit more durable. I mean just try a slash 2wd or 4×4 or hell even a rustler. They are no bad vehicles and the upgrades are endless man. Hell if you reacg out i have enough parts to build you a slash 2wd and ill send it to you guys to have.

The Jeep has bald ass tires

Good job, you inspired me to do the same thing on mine

I’m still considering getting one of those

Beautiful Jeep and sounds great too! ZJs and XJs are my favorite Jeeps!

It will take a 3s and I use a 3s 1600mah 30c and it surges a little bit but normally I’ll run a 5200mah 50c 2s

What exhaust does the red Jeep have? I like how it sounds

Rockin the No Fear shirt! That's a blast from the past for sure!

Awesome video definitely some nice upgrades

I added the Hobby Wing1080 ESC with on off switch that has totAlly stoppable drag brake running on a Traxxas T550 TITAN crawler motor and 2.2 Proline chisles with bead locks and memory foam on my Trail Runner. I love it

My K241 in a1974 Wheel Horse would not start and fuel is running out the front of carb the stock carb has been rebuilt twice once by me and once by a repair shop so I figured the carb was bad ordered one on line installed it and the tractor does the same thing anyone have any suggestions for me ?

U need to turn the burst up too 100 percent..its factory set at 75

119 subscribers and shrinking

Battle of the idiots! Try some pavement.....It's not a tug of war if both tires break loose. Darwin Award would have been if the cable broke and knocked out the driver of the HEMI

No mud tires for the Hemi. Put real tires on that truck and it’ll probably win.

I had that wheelie problem. I experimented with weights in the front. No more wheelie problem.

fyi not sure how long you been crawling but everything you named off is standard practice across all companies, leaking shocks, lose screws no locktite etc all normal . anytime you ever buy a crawler especially an rtr always take it out & start going through everything , shocks, screws, servos , panhard everything..

hi i just have a dhk maximus... cool rc i went out to the beach and well "was walking on the water" the rc was sink after a while and everything flooded....but the car came out from the water ,,, i took the car apart and cleanned every little piece i mean everypiece even the diifs ,,,, now it is just like a new,,,, ok so the motor the servo the reciever end the esc the servo started to get crazy but after i opened and cleared with alkohol then was working perfect.... the reciever the esc also cleaned with alkohol so put back together and was working all fine,,, only one thing died the cooling fan on the motor,,,so it looked all working i just have to replace the fan.... so i hade a 12v fan from some pc with a 3 wires and replaced with a original one used only the red and black wires ,,, now i know the original is 5v ,,,, since i connected that the esc not working like before it is not giving any beep and has a red light also the engine is not working first it is start to work without any touch of remote then it is working crazy so i thought it has a water also. it was some in it but it was working before ...i took the engine apart and dried it cleaned etc... now all back without the fan and doing tha same.... switch on esc no beeps redlight servo working but the engine doing the same...start to working by itself then stops then working forward for 2 sec then sotps and not working anymore,,, so do i have to reprogram the ecs? is my engine ok or still wet? can i only use 5v fan? I really appreciate for any advice Thanks

I only clicked because it said traxxas? These trucks suck! Break every time, we go out to bash, can't even take a 12 foot jump...

They all look bad, something is wrong..maybe with editing? I've seen those camera footage and they are nowhere as bad as wath i see here!

Great video

Redcat over Traxxas any day, You get great stock motor. BRUSHLESS! Out of the box $70 less than the stock Traxxas stampede brushless

That suspension is freaking awesome for stock

thanks for the video, just got mine last week and already purchased the upgrade metal suspension just waiting on them. keeping the brushed motor it came with and purchased a lipo to banana adapter. I have a 2S 5000 for it, we will see

Good thought , breaking it in .. after break-in you change the oil.forty years and it playing with RC never once thought about that...jc.. I swear to God Im mechanically inclined tee hee...lol ish .. ty4sharing!

Great vid my RC brother I just subbed up 👍🏻💯