วีดีโอ

21:42 plastic over screw holes without screws?

good work

im losing my fucking mind over the ribbon cables, first i just wanted to take it apart to clean the laser because it wasn't reading gran turismo 4, i fucked up the power reset ribbon in the process, i tried reassembling it and broke it. then while reassembling the whole console i think i broke the second one for the memory card and controller, it just can't fucking click, i always have to break something when doing this kind of shit i don't kniw what to even do now

18:00, the copper laser cable. How do I unplug it from where it’s connected to the board. I can’t figure out the plug and already have to replace the cable

What a great video. Really good shown and explained and it's the same model as mine. 👌🏼

Bro, you have this console yet?

nuguderaesNormasdecomuiad🎉

even thought this was 7 years ago it helps me alot

This was a lifesaver for me. I took mine apart like 9 months ago to try and fiddle with the laser. Ending up getting a replacement just yesterday and had no idea how this thing went back together. This is the kind of content that YT is made for. Thanks!!

great video

Awesome, just fixed mine! Thanks for the step by step and the zoom ins etc, very helpful video 😊

The lid fell with the cable and it disconnected itself😂 try it out and see

If you are here because the battery on your ps2 died, don’t get discouraged, if you follow this guide step by step, you’re gonna be able to replace it with no problem. It looks more difficult than it is. Worth to mention that your ps2 might look a bit different than the one on this video, but all models are relatively same, just keep going. Also big thanks to the author of this guide, its great.

6 Years later, your video helped somebody else again. In fact it helped me a lot doing mine, so thanks a lot to you. I credited you in the video description of course 😘

the 1st coin is the hardest lol

I put my PS2 controller back together and it now doesn't work at all. I'm seriously pissed because my controller worked perfectly fine before (minus a little stick drift) and now it won't work at all, no buttons work but the analog light turns on, how tf?

I just attempted this but the power/eject ribbon cable didn't have the blue tab on it so when I removed it so I couldn't get it back in to reassemble it lol. Not sure if the tab flew off somewhere or if certain models just didn't have it? All the other cables had it so I'm not sure. It's a SCPH-30001 R model.

Thanks a lot bro, I just replaced the battery on my PS2 FAT series 50000, I followed your video completely. Reconnecting the disc drive was a pain because I didn't take it apart. But in the end everything turned out fine.

Gotta give a like. Needed this to find where that leftover screw was supposed to go, lol. Thanks!

0:51 Did you attach that 4.5mm security bit to hex end driver end and unscrew screws? or did you use long 4.5mm security screwdriver that is one piece? thanks

This explains the PS2 needs an ALL Digital makeover without all the fuss and hassle showing why the All Digital PlayStation console rules forever.

What a pain to just change a CMOS battery lol Thanks for the video !

Mine wasn't like this at all. My middle piece is plastic and thus didn't have the plastic tray for the power supply, also my ribbon cable placement was different.

Thanks man, I managed to replace the battery in mine thanks to your video. It's not hard, just a lot of disassembly for something so simple as swapping a coin cell. To be fair though - 15 years in between changes is a long time ;)

Thank you so much bro. Finally got my battery replaced

Thank you for this vid ik how to take any ps console apart I just forgot where to put the long screws this is the only vid that explains it in depth I take all my console apart to deep clean cause to much dust makes any console sound like a fighter jet lol

PS3 CECHL01

I may be in the minority here but my dad used to own a original launch 20GB PS3 fat with PS2 Backwards Compatibilty (The one with a piano black trim instead of chrome silver and no card readers) and funnily enough it never once suffered a YLOD in its life at all and it lasted from November 2006 all the way up to 2010 when the Blu-Ray drive finally stopped reading discs and would ONLY read PS2 games.

for anyone like me who was confused when he didn't reattach the laser cable around 19:00, he reattaches it at 22:54 so just keep watching :p

Upload more good

I bought a 40gb PlayStation 3 at the salvation army for $45 after 50% off made in September 2007 still working

Appreciate the vid! A ribbon end snapped on mine and your vid helped me diagnose it. Ordered the new ribbon with your link 👍

Recently my fat PS2 console had about 3 problems, the CMOS battery died, the disc tray was opening slower and the inside of my console was very dusty inside. I took apart my PS2 console and it took me about 5 days to disassemble it all the way just so I could replace that annoying CMOS battery with a new one, I also dusted the circuit board with a soft worker paint brush, Q tip and the fan and then when I put it back together, my disc tray got stuck and wouldn't open and then I had to take it apart the second time when I fixed it I forgot to connect the laser reader ribbon cable so I had to take it apart the third time and then when I finally put it back together, my disc tray worked, the spinning orb animation and clock and date worked and it read my PS1 game. That was a very intense repair job I've ever done and my first one I ever took apart because it's getting harder to find PS2 consoles. I hope the Sony Playstation company will decide to reissue the PS2 slim consoles so we can play the older PS1 and PS2 and DVD and CD discs and even bring back PS1 and PS2 disc games which I hope happens soon.

i accidentally ripped off the fan connector while cleaning it, tried to solder it back onto the motheboard but i just messed it up even more.. now im using the fan with usb but it looks kinda ass ngl. Wanted to solder it to the board or find a better solution can someone help?

You quite literally saved my ass. Thanks for the highly detailed video.

I cried like ten times when i reassembly IT 😮

Wonder if thermal paste would be good on the heatsink and chips?

Bro I would have to suffer 💀

Still can’t get this ribbon cable on here right

18:43 Shouldn't you reattach that ribbon back to the disk drive first?

What model joystick is this?

Pretty dope video.

Awesome video, super great every little detail 🤘😎

I am the only one or My Ps3 Dualshock 3 Sixixis Controller have a blue thing insise on the green thing + The R2 button doesn't come off bc it somehow stings there on the controller back.

I’m having trouble putting the controller port back on

sounds good :)

Pretty cool but you never showed the picture or included in your video. What the main screws were that you took off with the long socket, instrument or tool

I fucking hate PS3 controller. They are the worst designed, and the worst to fix. You could go in trying to just replace a joystick that doesn’t have rubber on it, and the whole thing just falls apart. A literal pain in the ass

I was JUST doing those screws at 6:21 , and I stripped the last one beyond repair. So, after going through the stages of grief in less than a full second, I just used a pair of needle-nosed pliers to just simply TWIST that last stubborn screw out of its place.

Location of screws, amount of cables, etc are gonna vary based on year model of PS2. Mine is older than this one and there are some things that are significantly different. Also I’m experiencing a nightmare trying to plug the ribbon cable back onto the disc laser. Somehow I bent the end of the cable and it doesn’t wanna go back in at all. Guess this ps2 is going in the trash