- 19
- 63 494
Isaac D Projects
เข้าร่วมเมื่อ 25 ม.ค. 2022
Building things from the Halo Universe and others to life. Showing my steps along the way.
Creality K1 Max First Impressions & Review!!
Hi Everyone! So this is a little different then my usual videos. For the last month or so I have been trying out Crealitys new K1 Max. Although hopeful at first, I had many issues from the start. I'll highlight some of the issues I ran into that can hopefully help you in your decision before purchasing one. I feel the unit I received may have been faulty to begin with, many other users have had major successes with full prints. IF you are looking to get one, I would HIGHLY recommend buying from a vendor that has a hassle free return policy (Incase your unit is faulty like mine was). This would of saved me the majority of the headache I had so I did not have to wait over a month to return it. Thank you for watching my video and please feel free to ask any questions in the comments below!
Creality K1 Max amzn.to/3QsS1vV
Camera Gear:
_____________________________________________
Sony A7SIII - amzn.to/3WD8H4g
Sigma 24-70mm - amzn.to/3Gu5ezL
Go Pro Hero 10 - amzn.to/3C2idFY
Creality K1 Max amzn.to/3QsS1vV
Camera Gear:
_____________________________________________
Sony A7SIII - amzn.to/3WD8H4g
Sigma 24-70mm - amzn.to/3Gu5ezL
Go Pro Hero 10 - amzn.to/3C2idFY
มุมมอง: 933
วีดีโอ
Building Halo Reach Spartan Armor - Legs
มุมมอง 6K10 หลายเดือนก่อน
Hi all! Thank you all for your patience on this! I've been working on this for the last few months with a few setbacks due to work with the busy summer. This video is a bit longer then my last ones but it will show my complete process in finishing the legs for my spartan armor from the beginning to the finished paint job. Feel free to ask any questions or any tips you'd like to share in the com...
Building a 3D Printed Helmet From Halo - EOD Painting & Finishing
มุมมอง 4.8Kปีที่แล้ว
Hi everyone! So this is the last part of my EOD Helmet build from Halo Reach. I thank all of you who have been patient as I work on my prints! I plan on making more helmets as time goes on. Soon I hope to be able to start listing new prints I do on my Etsy store. Please let me know of any ideas or prints you'd like to see done! Here is the link to the shop I purchased the EOD model from: www.ag...
Building a 3D Printed Helmet From Halo - EOD Printing & Sanding
มุมมอง 7Kปีที่แล้ว
Hi everyone! So this is the first part of my EOD Helmet build from Halo Reach. I thank all of you who have been patient as I work on my prints! Please let me know what other things you'd like to see in the near future in the comments below! I hope to get out the second part of this build out within this next week or two. Here is the link to the shop I purchased the model from: www.aguilarworksh...
How to Make a Mirrored Visor Under $20
มุมมอง 7Kปีที่แล้ว
Hi everyone! So as I continue to work on my EOD Helmet, I thought I'd make a short video on how I create my visors. It's budget friendly; all you really need are some clear dividers that go in a 3 ring binder and some mirrored film you can find on the link below! If you have any questions, feel free to leave them in the comments below and I'll be happy to answer any feedback. One Way Mirror Win...
Building a 3D Printed Helmet From Halo - Commando Finale
มุมมอง 11Kปีที่แล้ว
Hi everyone! So this is the final part of my "Commando" build series from Halo Reach. I'm redoing some of the sanding by trying out glazing spot putty, wet sanding, and finally getting to the weathering! It's been a fun two months working on this, but I'm very satisfied with the final look. I thank all of you who have been keeping up with this! Please let me know what other helmets you'd like t...
Building a 3D Printed Helmet From Halo - Commando Part 2
มุมมอง 4.2Kปีที่แล้ว
Building a 3D Printed Helmet From Halo - Commando Part 2
Building a 3D Printed Helmet From Halo - Commando Part 1
มุมมอง 8Kปีที่แล้ว
Building a 3D Printed Helmet From Halo - Commando Part 1
Ordered my helmet, now time to make some Armor, when i can get my neptune 4 max :,) Cant wait to join the club! UK Spartan Gang
Best of luck! It's definitely a process for sure, but worth all the effort
Love the blue on it
Honestly, I didn't realize the blue until after It had dried lol it was a lucky accident that came out great
What type of filament did you use?
I used the basic PLA filament from Zyltech, It's pretty inexpensive and works great in my experience!
Legendary tutorial. Definitely gonna give this a shot. How is the visibility?
It's actually pretty good since it has a smooth surface, similar to looking out a tinted car window
Awesome update, can't wait to see how this turns out
Thank you! I need to finish the other parts soon, but once I do I'll update the channel!
Cool
Did you have to scale any of the models or did you just print it as it came in? I've started my 3D print today. I have a 22 inch diameter head.
I use a couple of programs I have; I also measured my head to reference. I usually scale, just to be safe, because I've had bad luck before when I print something either too large or small
i have a Question, since i do not live on the States, that Acetone is the same one that the women use for her nails?
Yeah it's basically just the nail polish remover lol my wife actually let me borrow some when I was cleaning some tools
Where have you been
Hi there! I've actually been trying to go back to school, it's taking a lot more of my time but I'm hoping I can get back to be working on the rest of my builds
This is legitimately awesome, I just acquired a vacuum former and I am going to 3D print the "buck"/mold for the visor, and use your technique here for the mirror tint because yours turned out so good. I'm making an mkv armor suit and mkVI helmet, and this will help me immensely and seems simpler than trying to dye for color and paint the one way mirror coating on.
Thank you so much! I just got a vacuum former too, and I hope to use it on some of the newer helmets released during the operations. Lots of options lol but happy to help! There are lots of ways to achieve the same result for visors
give me it lol post more plz
lol I plan on it!
what did you use to secure the straps to the insidess of the legs?
I super glued some 2in buckles that I found on Amazon, it's well hidden, but attaches to my belt
gonna try this with fiberglass, to make it somewhat bullet proof
That's actually a good idea, I was thinking of reinforcing the inside with fiberglass for added structure
im going to try this with my master cheif helmet
You'll have to let me know how it turns out!
Looks great
Thank you!
great job! would love to see how you did your chest piece, also what color paint did you go with for the armor?
Now you just have to cast them in titanium and add the energy shields and your all set to finish this fight.
Oh how I wish that could be true lol queue the Halo 3 Landfall intro
thank you! subbed
Thanks for the sub!
You should try to make it airsoft compliant so I can wear it
I hope to one day! Once I make one, I'll be sure to share it
would this work for a motorcycle helmet visor?
I would think so at least on applying the mirror finish, It's basically like adding tint to glass
How is it secured to the inside of the helmet? Would i be able to quickly remove it to take my glasses on and off?
That's a good question! So this helmet is from Aguilar Workshop and actually has a slot for the visor which holds it in place, it can be easily removed since the visor is a bit flimsy but putting it back on might be hard if your wearing the helmet
Hey love the videos and keep up the great work 🤘🏻 what ratio of bondo putty to acetone did you find to be the best for the brush on mix that you made to fill gaps?
Thank you so much! If I remember right, for this one, I did about 1:4, I'm still trying to figure out the sweet spot, but it's very forgiving
I’m starting my H3 Hayabusa helm and this video is insanely helpful!
I’m happy to hear! Once you finish feel free to share a photo of it! I’d love to start sharing builds in videos
@@isaacdprojects for sure!
Hi what 3D file did u use I like the look / sizing of these leg pieces ?
I used nerdforgedesigns models that are on Cgtrader, they should still be listed. Just make sure you scale them to yourself as everyone’s a little different👍🏼
I’m so excited to see the full armor would love to see more progress videos! Also what kind of pants are those motorcycle cargo pants?
Thank you so much! And for the pants I bought some off of Amazon that had existing knee pad holders. I believe they were under tactical gear for air soft. Let me try and find it and I’ll link it here
But would this work well for a multi-part visor like an ODST helmet? I could cut it and stitch it together but I'm not sure if it would look clean.
That's a good point, I was thinking of maybe hiding the seams on the edges, but I would have to try it to give an honest answer first
How much do you sand before the primer? I'm making a mark v zeta helmet and very close to having all of the pieces printed.
I sand once each face of the print, 80 Grit is pretty coarse, so it gets the job done fast. It also lets the primer fill evenly once it's sprayed. Hope this helps! Best of luck on your Mark V Zeta!
I'm trying to print an emile helmet from reach, and because of the odd shape of the visor, I'm not sure how to make it functional. any tips?
That's a tough one, I bought a vacuum former to try and see if I can do some helmets like that. But try looking at the blogs posted by Aguilar Workshops on making a resin cast of Emile's helmet. It's basically printing a negative and pouring resin. It's more cost-effective, but I'm sure some trial and error to get it perfect
You might’ve already answered this but what kind of 3D printer do you have?
Currently, I have a Bambu Carbon X1, but I printed this helmet with a Cr-10 V3
Were you at his worlds in Cardboard armor wearing eod helmet?
HCS
Not me, but I hope to be there this year in Seattle!
@@isaacdprojects see you there
Sick!
Thank you!
This is amazing! thanks! If one day I start printing one of this helmets I will definitely use this technique! thanks a lot!
You're very welcome! Happy to help!
How much filament did you use?
Roughly 1 1/2 spools I’m pretty sure, a good part of it was due to supports
Nice. Im starting a MKVII Helmet in a month or so and this is a good motivator to get it to look as good at yours
I’m happy this helps! And best of luck on yours! It’s a process but the end result is worth it
beautiful work mate gonna get a 3d printer soon and thinking of making some ODST gear What material is used for the visor? Do you reckon it'd be able to be used for the ODST Visor (with it's weird bits at the front) like in the ODST game? Edit: Just found your visor video xd
Haha🤣 Sorry for the late reply, but yes the material is in the other video. For an ODST visor I’ve seen people have luck using a hair dryer to form it around a buck? But I myself just got a vacuum former to try and get them done since it has those creases
@@isaacdprojects Nice. Thanks for the reply
@@isaacdprojects also I did end up getting the printer, have so far printed a plasma pistol and a few other small figurines, gonna do a magnum soon then when I get some more money and better quality plastic (the sun resistant stuff etc) gonna aim for a helmet :)
Great video! Hope you get monetized soon!
I appreciate it! And hopefully!🤣 it helps fund these
Awesome helmet!
Thank you so much!
I'm actually working with the same files right now. Do you have a discord server for your fans to interact with you? I'd love to pick your brain about a few things. Great video by the way.
Thank you! And honestly, I hadn’t considered making one until now. I’ll look into getting one open since there’s been a few questions I have gotten, feel free to shoot me an email if you have any questions until then. I’ll respond back to this email when I get a discord up
Which program did you use for sizing
For sizing I used armorsmith, I had to get all my measurements myself but it allows you to put your info there
Great video and awesome work, where dod you find the files for the armour ?
Thank you! I found these on CG Trader, they are by NerdForgeDesigns
Looking at your box you got a version 1 of the k1 max, the most recent version has k1 max in blue, with the newest extruder, I think you’ll have better success
Really? I hope so if I’m being honest, I really liked the idea of the K1 Max. Do you of any vendors that sell the V2? This I had got straight from Creality in September
Make me one please I want George’s helmet, please
I plan on making his too!
I built this exact model as well. Excellent work.
Nice! I see it on your pfp, good work!