วีดีโอ

Thanks man! Took some patience.

@@markferioli208 I can see that makes the bike look really good 👍

Thanks! I caught some crap for it since I dented up a perfectly good tank, but it’s what I wanted so screw them.

@markferioli208 lol I hope you still have the bike. I pickup a free running 99 vt750 shadow bobber out with tj custom stuff. I'm just finishing the project to enjoy 😉

I do. Plan to take it to work tomorrow. Have fun with yours man! Be safe

Oh ya I agree with the board movement when shifting your hands. You really gotta be consistent. And yes, not standing right behind the board getting hit by the dust is nice too!

Thanks for the tip! Unfortunately I don’t use it a ton so it’s been low on my priority list.

Hey big fan! So that could be one solution where the screws have come loose and a simple tightening fixes it. If the holes are stripped where the screws go in, take them out and fill the holes with pieces of toothpicks and screw them back in. If this doesn’t work then the edge of the door may need to be planed down with a block plane. Hope that helps!

Thanks for watching. And I didn't buy the wrap! My buddy bought too much for his bike so he gave me the rest. It was a full roll and I didn't use all of it. Sorry, not much help here.

@markferioli208 no worries, thanks for the reply 👍

Thanks man!

You’re welcome, glad it helped out!

Hi! Unfortunately I have no idea. I kept my stock filter on so I didn’t need to find out. Best of luck.

There’s an even more simple solution to your problem. Can you guess what that is?

I got the short round fender from Tj Brutal.com I also got the mounting kit from them. I made two videos for this. One for smoothing out the fender and one for mounting it. Check out my channel for those videos. Good luck!

Awesome! Glad I could help you!

Ya mine goes under the seat and just hangs down to the bottom of the bike. Not hooked up to anything. So I still don’t fully understand if this is right but after doing a quick search it says it’s for the air to escape so the bowl can fill up with gas. So maybe by pinching it, not as much gas is getting through the carb making it run lean. Which if it runs better, then maybe your carb is running too rich? This is all a guess though. I’ll do some more research!

That’s about 45lbs more than me. I feel that I could use an upgraded shock. But then again I don’t travel too far on it.

Awesome! Thanks for watching!

Awesome, glad it helped you out

What edge are you referring to? Unless you mean what keeps the fence straight with the feeder pushing against it? The fence is very strong and it would take much more pressure than what I have on it. The feeder is angled towards the fence yes but only a slight amount.

@@markferioli208 usually a featherboard is used to keep the wood against the fence. How does the wood stay pressed against the fence with this?

Oooohhhhh my bad! I understand what you’re saying. So the power feeder is set slightly at an angle towards the fence so it is constantly pushing the board against the fence.

Refer to 9:44 of the video and I talk about that

Ya it was! Haha oops

Thanks for watching! It’s been awhile. Looking forward to making another one.

Ya as stiff as that arm and support is there is still some play. I also have a little more pressure on the wood than I need since my tires need replacing and don’t have as much grip.

@@markferioli208 Common with all feeders.

And I don’t use it a ton so I always forgot to order the new tires

@@markferioli208 Try soaking in thinners a while, they soften up.

@@davidbowden8362 oh I may try that! They need replacing either way at some point from all my learning mistakes haha

Ya man it’s from the fabrication process. Probably why it’s one of the cheaper ones. Check out this video where I smoothed it out. Good luck! th-cam.com/video/IyhUPaKjG7U/w-d-xo.htmlsi=JqgXQ0Qg8OUSR4TB

Yup! Just a rattle can from lowes. Krylon Fusion Matte Spanish Moss

So I bought the shinko SR777 tires. From what I understand they are a good all around tire for not that much money. I got them on Amazon. My rear size is 170/80 B15 and the front is 100/90 -19

Not sure what you mean? Do you mean the throttle cable that attaches down by the idle screw? If so refer to the 9:08 minute mark on the video. Hope that helps. If not, please clarify as my terminology for this stuff is very limited!

@@markferioli208 mine is a single cylinder that has a idle line attached to the carb

@@kevin2298 ohhhh ya I do not know anything about that unfortunately. I may even have an idle line on mine, but all I did was remove hoses and put them back in the same spot. I assume yours will look different. If you’re on Facebook there’s a great Honda shadow customs page where people have a lot more answers for stuff like this. Best of luck man!

Thanks man! Still have some work to do but it’s awesome having a bike to make my own.

Thanks man! Hopefully got a few more videos coming!

The previous owner did. And if I did I’d have my shop do it. I’m sure I could figure it out through videos but it’s worth it for me to have someone who knows what they’re doing work on it.

Thanks for noticing. My vocabulary is limited but I sometimes surprise myself.

Ya it’s not the worst just not ideal for really long rides. But for customization it is great. Especially with the rear shock being hidden

We made the decision to make it wall art since we barely use the one we already had!

Glad I could help

Awesome! Glad the video helped out!

Ya there’s the screen filter in the petcock and then the in line filter under the seat. And ya that’s the issue I was having with the exception that I couldn’t even get up to that speed. But now that everything is clean it runs tip top. A bit of advice though, if you replace stuff like filters or pumps or even the gas cap, buy OEM stuff. My $20 pump never worked. I have it gravity fed right now, but I need to buy the $200 Honda pump. May Amazon gas cap sucks too…. 😂

Hey Carlos, there’s a threaded hole on the bottom of the clutch side. The hole is too small so I made an adapter using a lathe and tapped my own threads. Maybe I’ll make a quick video on it.

I you can make a video showing the process, and it will be awesome.

@@carloszacarias1147 when I get a chance I will.

Hi Chris, it’s a power feeder. They are more commonly used on a shaper for accuracy but more importantly safety! I use it on the table saw when I’m making a lot of the same cuts. It helps with fatigue too as it’s like feeding a surface planer!

Thanks, Mark. Can you tell me the make of the feeder and maybe the model, please?

@@chrisbezant4760 hey Chris sorry for the delayed reply! The feeder is a maggi model Steff 2038. I just posted a video on how it’s used on my channel

Hey! I’ll try to get one up this week. I didn’t add any forward controls. Just the handlebars.

Hey man sorry it took so long, but I finally got a video up on my channel showing how I look on the bike.

Hey man, it’s an Amazon special. It’s pretty easy to setup but the difference between the driving light and brake light isn’t a lot. It’s not as bright as I would like. I’m going to add a sissy bar with an extra brake light though. Amazicha Motorcycle Tail Light LED Brake Light Rear Light 1" Side Mount License Plate Bracket Holder Compatible for Harley Bobber Chopper Cruiser Custom Bike Honda Yamaha Suzuki Kawasaki a.co/d/1CpI7uT

@@markferioli208 hell yeah! Thanks man. I got one from blue collar bobbers and it takes up to much space for a bag

Thanks

Thanks man! I try to include every step since that’s what I look for in videos. Glad it helped you out!

10inches ok 😂

@@spalonaszafka4132 I thought I made that clear in the title, but I stand corrected…

Thanks man! I appreciate it

Awesome! Glad to help out. Good luck!

I didn’t. I should have. I used bondo to smooth out all my dents. I sanded it down then used a high build primer from a spray can and sanded that. I painted it with krylon spray paint. I then used a 2k clear coat and followed the directions on the can for that. I got that on Amazon. The 2k clear coats protects the paint if any gas spills on it. I can tell you it works really well since my original gas cap leaked all over it!!

Thanks for the answer. I’ll try to do the same.

@@maximeroy8622 you’re welcome, good luck!

Hey Smirf. The front fender is the stock fender and the rear I got from TJ Brutal. Check out my video on the fender fix. When I got it the fender had a bunch or grooves from when it was made so I show you how I smoothed it all out before painting it.

Ya but simply removing anything by the book never goes as planned.

TJ brutal. They sell the mounting brackets too.

Thanks man!