วีดีโอ

If your going on a dyno the tuner will have everything needed

Appreciate it! I have a playlist on the channel that has everything I've done to the car. In the description of each video there should be a link to the part i ordered

Couldn't agree more.

@@zach_lush 💯

I'm not too sure what this is supposed to mean.

I'm assuming your talking about the forum where you put an 06 seat in an 05? If thats the case then yes lol

@@zach_lush yessir. I added you. You may know me as well from the groups.

@@mikev350z not sure, mightve seen you around. Im still fairly new to the legacy platform.

You can find them on Ebay or your local aftermarket auto part shops

Haha same here!

No problem, happy it helped!

From my knowledge I don't think theres anything else.

Thanks! I don't know exactly why, but I believe it was from running a COBB OTS tune.

Lol! Sounds good 😂

Its actaully 18x10.5 lol! Its not that bad, i know people with 225's on a 10.5. Till this day I've had zero issues with it.

It is acraully plug and play, it comes with a harness incase your car doesnt have the appropriate connector.

The cable to buy? The tactrix cable is universal. Just go to tactrix website to buy one

Honestly, can't remember, did this over a year ago. Just check through your settings.

I believe they would be the same. Dealer would be able to verify for you. Part number is in the description.

No luck with rock auto?

I've heard about potential issues with the shorter steering ratio. But I've had zero issues with mine since I did the swap. I also have the 2.5 GT, not sure if the 3.0R is any different. Personally I can't see it being different.

@@zach_lush racks for 2.5 turbo and 3.0 are the same, so the STI will fit mine, I still need to cut some threads and bend the power steering lines like you did, but it's totally doable. I read on a 2014 forum that the issue is only for Outback because it has 17 to 1 ratio, Legacy has 15 to 1, STI has 13 to 1. Legacies usually don't have issues because the difference is not that great, however Outback has. So this is why you don't have issues, Legacy is ok, Outback not so much unless you disable it via the button. Thanks for the reply.

Well if its broken it will just get worse. Potentially cause further damage.

@@zach_lush ok I see, thanks bro

@@GCASTROOO1 no problem

Hey Odd, are referring to the block off plates? You can try ebay or any local aftermarket car shop to you. They aren't too hard to find. Good luck!

@@zach_lushOk, thanks for the info. Have tried to find something online, do you have a link to one of these dealers who might have something like this. This is a Subaru Forester, without turbo. (Engine code EJ204 MVh Odd

@@oddjorstad5007 this isn't something you can get from a subaru dealer. Just search up 'subaru air pump block off plates'. You can buy them online.

@@zach_lushThank you very much for the good tips..

Hey, what do you do with this hole then, after you removed the pipe? Top hole, look for 5 minutes of film..

Yes, the LCA's are still factory

Nice, for the price its not a bad little brace. Im adding another bracket onto it to hold my aftermarket FPR.

Take a shot for it

What did the shop do to the line coming from the firewall? Is it being vented or blocked? Are the solenoids still there? Also are you on the stock tune still? If so that would cause issues.

@@zach_lush they zip tied the solenoid to the back, and kept it plugged in to the harness. It’s tuned open source. I can check the tube from the firewall and report back! Thanks for the response!

@@Emzy-87 yeah, double check the firewall!

@@zach_lush ya I don’t see anything plugged or re routed coming from the firewall. Wish I could send pics

@@Emzy-87 hmm, I'm not entirely sure then, maybe double check how they kept the solenoids plugged in? I know I had to put them back in. Can't remember which video I showed that.

4:08

@@zach_lush yeah you showed it for literally 1 second and didn’t show how you put it in lol

@@CCGDude because snap clips are self explanatory, figured after showing the location that was good enough

I'm not familiar with mazda, but assuming you buy a head unit that can accept inputs I cant see it being a problem. I know I've seen heasunits that replace a bunch of plastic trim and fits a 9" screen in there. Definitely worth looking into

@@zach_lush I think I have the same steering wheel, but with few different things. head unit accept input but I don't know if there's a way to set combination input? Which would be the easiest way of getting it working

No problem, just make sure you do a double flare when you do it

The fix ended up being permanent. Haven't had an issue since. If yours is squeaking really loud it might be too late, but might aswell give it a shot!

@@zach_lush it’s about as pictured in this video. The same amounts of squeaking D:

@@zach_lush but what did you mean by “too late”?

@@waybach the bearrings could be destroyed already. Won't know till you try

Theres an app on the device where you setup the sterring wheel controls

Thanks, shes been good ever since!

Not a problem, happy they helped! I had the same issues so figured I'd make my own videos to help people out.

No problem, hopefully its back up soon!

Try the one that came with the unit

Good to know, thanks!

@zach_lush no problem keep up the content

Thanks, unfortunately they are not works. They are Aodhan DS02's, someday will own some works!

Its similar very to passenger side, just ran it across the back seat

Theres nothing in the front, also used the provided screws that came with the camera

Ok so two questions the wire on the the plug that I plug into the back of the unit isn’t used? And what did you do with the wires dangling on the end that goes into the actual camera

Also when I’m in reverse my music stops do you know how to make that stop?

Also when I’m in reverse my music stops do you know how to make that stop?

The same thing happened to me do not just need to take out the battery and try again?

Yes, originally had no idea what was going on when multiple things stopped working properly

@@zach_lushwhere did you guys get the new fuse from and did you replace it immediately or after it had worked?

@@PeterJosephChukwu in the engine bay theres extra. Changed it right away

@@zach_lushthank you so much

Nice! Its a bit louder than stock. Not bad for a daily at all

@@zach_lush just actually installed mine this morning. It had a resonator delete so it’s actually louder than I expected. Mine also fits like crap so I’ll have to modify the hangers to get it sitting right. Haven’t driven it yet so I’m looking forward to that!

Not a problem, happy the video helped!

Was recently offered a speed3

The steering wheel controls worked when i set them in in the SWC app. I dont think you can get your factory camera to work on it

@@zach_lush appreciate you, i’ll try to figure something out tomorrow as i just installed it today

Haha, not a problem! They are pretty sweet

@@zach_lush oh! Did you have any trouble with water getting into the electrical connections?

@@frankblack7070 zero issues so far

@@zach_lush thanks!!

You can drain it using the controller