วีดีโอ

Thanks for following along, send me a DM on Instagram @midlifecarisis regarding the other wheel

@@midlifecarisis_ done! Was already following you there :)

Thanks for all the mentor-ship and guidance.

The wheel is the same size, it feels smaller in your hands moving from the leather to the Alcantara. I think because it compresses more.

I am afraid when I hit the iPAS button, I am going to hit the accelerator to fast and hard like it was a NOS button. You might as well have fun with your car or what is the point. Thanks for Watching

@ totally agree. What’s the point. Look forward to the next video

I will let Frank the camera guy who was filming for Kevin and I, to stead his hand and stop drinking...lol Thanks for watching and enduring.

Please let me know what questions that I can answer for you on the vacuum setup, I will do my best to help. What McLaren model do you have? Thanks for the feedback on the video!

There all kinds of sellers on eBay offering this diffuser, the quality and fitment were good on the one I bought, but they sucked to deal with gave me in correct shipping details 3 times. It took 2 months to get it. They are called AutoTuningMall. Here is the link, but I do not recommed them. www.ebay.com/itm/286041248476

Thank you appreciate the support!

Thank you, appreciate the support!

Yes sir you did a great job!

We are trying, love the way it is coming out!

me too!!! Curious, does your car have front lift?

@ yes it does

@ that’s awesome. How much lift does it give you measured at the front lip?

It lifts front 2.5 inchs, about 2 in the rear, quite a bit, it looks like a 4x4 with the lift up.

Crazy how carbon makes such a difference! Thanks for the support and comments!

@@Deighty181 Diagcode

That you. I enjoy watching your videos. Very good information.

I now have 105K on my 2020, new brakes and tires, but everything else has been really good! I highly recommend it.

.

Thank you @kcobean...It has been a passion project, more to come, now it is about the little things. Thank you for the support and encouragement.

We did it had not been steamed by the uphoslter yet, it is done now and looking nice and tight.

Nice

Thanks for all the inspiration! Can’t wait for your next video.

That 3M tape just took the OEM Clear coat right off! Brian likes to blame you when your not there. lol

@midlifecarisis_ there shouldn't be any clear on the badges 🤣😂 in our industry, that's as bad as the drywall screws

Superleggera was the highlight!

Thank you for all you do!

It is just held in with double sided 3m tape, used a plastic trim tool and heat gun and prayed on multiple times till it came out. Thanks for watching good luck

@midlifecarisis_ I hoped it was something like that. But very wary about forcing it out :\ Thanks :)

This is SUCH a cool project! I can’t wait to see it all finished. I can’t imagine what all this is costing but it’ll be worth it it’s done! Way to go dude!

@ Thank you, final reveal video from the auto show comes out this week.

@@dr.warner2288 Thanks, best of luck.

@@midlifecarisis_ Fingers crossed lol

@@midlifecarisis_ Is it okay if I ask where you got the subscription for the recalibration? Thank you again for any help (is it DIAGCODE?)

@ it is Diagcode, bought single vin subscription

@@midlifecarisis_ thank ya :)

Thank you for the feedback, either way I like my stupid rain light! Thanks for Watching.

Thanks for reaching out on Instagram!

I will be doing some type of Carplay Andriod Auto upgrade early next year. The wife is all about the interior, so Carplay and sound system are on the list. Thanks for Watching and Subscribing.

@@midlifecarisis_ sounds good, keep up the good work. I had another 650s and I upgraded the sound system, best mod I ever done but it took some real state from the passanger foot rest area. I'm going to upgrade the sound again but I gotta think were to put the 10" subwoofer 🤔

@@Emadavid First world problems love it

I like that suggestion, it is being sprayed today and tommorow, so I am super excited!. Thanks for watching.

For a similar build for seats and door panels you would be between 3K to 4K, I got a really good deal, because we are working together to show my McLaren at the San Antonio Auto and Truck show.

That's not horrible the only bad part is that I'm in Florida 😂

Trying to have a clean ass car like you!

I read and appreciate all comments! Thank you for being a part of the video and this journey!

Thanks for the feedback, it will definitely be orange.

Not quite the level of transformation of your McLaren thats for sure. What don't you like the rain light, the color orange we picked. All opinions are welcome! Did you do any video's of the full 675LT Kit install?

First name submission and front runner at this point!. Thanks for watching! Wait till the next video so you see what we are doing to the interior.

@ can’t wait. Good luck with the project.

You could also connect the rain light to the rear fog light wiring instead of the brake lights.

Thank you so much! Can you email me a photo of the back of your McLaren and send it to midlifecarisis@gmail.com. I will send over more info as well. Thanks for watching, please consider SUBSCRIBING to the channel if you aren't all ready!

There are a couple ways you can wire it, we actually have not developed the entire wiring kit and may leave it up to the installer. We may integrate a switch into the mix as well.

Thank you!

Are you an OEM type of car enthusiast or just think McLaren Orange is the better looking color?

Mmmmmm....im sure Carol Shelby, Brabus, Singer and Roth never heard such purist words 😢 Let us Cook good sir! We will not disappoint 🙌

Dang! You are resourceful! Not sure what I am going to do with my old parts, should I sell them to someone else who might want to fix them?

I think if there is enough interest, we would 3D scan and then print, the one in the video is first attempt for my car. Hopefully if we get 5 of more we can put in place some economies of scale. Thanks for the feedback and for watching.

@midlifecarisis_ my dream build is a 650s with a 675 LT rear wing and rear bumper. I don't like the front bumper is extremely low on the 675LT

Thank you Charles! - Really appreciate the support - Thanks for Watching

I am so glad Kevin and them were able to help you out! Next time I do a trans service next year, I will do the SAV block cleaning for sure. Hope you are trouble free for many smiles to come.

It wasn't me it was Edward - King of 2-part epoxy

I am going to be monitoring the ride quality and may ending up replacing the last one if needed. Thanks for Watching!

I figured that was the case with the double-sided tape. Thank you for watching and following along. "I have a new Darwin Pro lower bumper I bought. Do you have any of the side panel bumper cheeks, grills or internal bumper foam?

F*ucking jackasses. If you don't intend on fixing it right, leave it to someone else, is what I say. There are easy ways to make a quick buch then scamming and hurting people. Luck on mine it did not cause a radiator leak. Thanks for watching, please consider subscribing to the channel to get updates and see how this things ends.

No HP gains, for me it was sound and price. AWE at the time was quite a bit more expensive. MBRP was a good balance between sound and price for a non-valved version. Thanks for watching and commenting, please consider subscribing to the channel!

MBRP says that it adds "best performance", but doesn't state any numbers. I have this exhaust, along with the Attack Blue air filter installed at the same time, and all I can say is .. WOW!!! This was the BEST addition I have made to my car and it totally transformed my car from that I liked to one that I LOVE!!! ... Paddle shifting with this exhaust is so cool.

I was expecting some epoxy, but never did a expect plastic welding the parking sensors to the bumper. Honestly I hope someone who worked on my car comments, just so I can ask them why? So far I have sourced a good used upper bumper from a white 650S and 2 front parking sensors from a blue 650S. Still looking for one side bumper cheek panel for the passenger side and one good plastic mesh grill for below the drivers light. Seems I can find the opposite side but not the side I need. Thanks for watching, please consider subscribing to the channel so you get notified next time I upload!