วีดีโอ

i have had nothing but failing print after print on my elegoo 3 pro the .4 mm nozzle using duramic glow pla...... but on my elegoo 3 max it doing just fine with the .6 mm nozzle at .3 layer height at 232 for the temp. i all use the amolen glow in the dark pla bundle and that is not as stiff as the duramic. the amolen glow in the dark prints perfect on all my printers. i would recommend using tool steel nozzles when using filaments with special additives like the glow additives.

I decided to try PETG on my CR10 v3. After trying several print settings I found on message boards and always ending in frustration I found this video and the settings seem to working much better. Thank you.

Just little bit confused which one I should exactly buy, please help me out thanks..

Took me 7 days to understand what I’m looking for in failed prints! What a legend! Thanks!!

Thanks!

Hi running a proforge 4 and finding esun PETG infill on grid is getting fluffy and not looking great, breaks between the line its traveling but the gyroid looked ok.

i have 2 external hard drives 5TB formatted so i can save games onto it as the 1tb internal drive is too small. also have a 2tb external storage to save Captures onto and also has films mus and pictures you can watch through xbox.

It's a special PLA? Or just a simple one?

Looking for 4k 120 that can be mounted cheap

Hi, I’m fresh in 3D printing world and everything works like a charm with PLA but yesterday I tried to print with PETG and it just don’t work I mean on bed levelling, extrusion, temperature and other stuff is ok but not bed levelling. Do I need a little more gap for PETG since it is a little bit more thicker than PLA?

I notice that when i level the corners the nozzle will have a big gap in the middle of the bed any help pls thanks in advance

How do you attach this to a night light? What type of night light?

Just starting out. Nice idea for the thermal receipt paper and the feeler gauge technique. Thank you for sharing. Everyone stay safe, happy and healthy.

Is this better if I print in white?

Can i record 1 hpur gameplay with 64 gb usb 3.0?

Do you have links to the LIGHTING SPIGOT ADAPTER and the clamp you used

This is a superb advice! Thank you very much!

What causes little "holes" in prints? I am new to 3d printing and my prints do not seem to be of a great quality. I get the lines, will try inronig to get them out, but occasionally within a line there will be a tiny hole. They are visible if you know where to look. I find them unsightly and have tried to fix them. Any advice would be very helpful. I have an Anycubic Cobra 3, standard .4 nozzle and using anycubuc slicer. I will try Ciura and see if that helps me any. If you have a video on this topic, please point me in the right direction!! Thanks in advance!

Lat time I checked those are calipers not micrometers. Micrometers are literally 10x more precise and look completely different

Good info. Your eyes looking above the camera is very weird feeling

hello , I am trying to print using the same website, I have Anker 3d printer, any advice whais the better choice for fillemnt? I tried ABS but quality and details was very bad

Could you share this configuration please?

Hello, i have problems and im not happy about my printing when i try to use ironing… i use bambu lab slicer ! Its like its burning the surface and rubb the surface up ! And on big parts (big flat face) its fuck up even more

So can you have 120FPS IN GAME on a 60hz monitor (like on pc) OR you NEED a 120hz display to get 120FPS IN GAME? Idk if anyone reads this this late but im reading so much misinformation and people trying to expain things nobodys asking its insane. I KNOW IM ONLY SEEING 60hz, but 120 or even higher fps feels SO MUCH smoother and better on pc. Im thinking of buying a series s and itd be a dealbreaker if it was limited to 60fps because of my 60hz monitor. (EVEN THOUGH IM TECHNICALLY NOT ABLE TO SEE IT)

It says it's too slow I'm sticking wrote down 3.0 and they sent me this 🤬

Thank you so much🙏

Trying these settings out right now with orca slicer, I've been having some issue printing PETG on my Neptune 4 Plus and have finally gotten it to stick to the build plate so I hope these seiings are the sprinkles on the cake I need to get my prints looking good :D

A normal print is 0.2 layer height. Sounds wrong having 0.06 between nozzle and bed then? 😂

what is the best color to use or does only white work?

I’ve been struggling with PETG and gave up. I’ve tried again with your settings and had a successful print. Cheers

You are not taking your own advice. you are checking with no heat or the paper would turn black. It is thermal paper after all.

You would not dare!

Something i do a lot is do a bed level test on my printer and adjust it while its printing, saves me a ton of time and works perfectly

How do I actually get the footage onto my iPad? I want to use it to make TH-cam videos but I do not have a pc

3d rocks has changed its platform now u can't fo anything:(

I really like the dell one. I purchased a newer model 4k. In my opinion, it is at the top for that price range, and even can recommend it towards the 400-500 price category. From that Dell, going to a 400-500 dollar category there really is not huge improvements from what i have seen. Not monitor is just 100% in my opinion either. You might get more fps with a 400-500 priced or higher monitor, but to non gamers that is not a huge area of concern.

To clarify is the screen led or lcd? Bestbuy lists it at led

Nice video. 4K, IPS panel, LED screen (I think), HDR, wow great price.

How is the quality of the recording?

is it normal after importing my .stl file it delimitates some red areas/lines on my pic lithopane and gives the following error "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura" ?

Dude I’ve been struggling badly at this. This was beautiful ty

Can you do this on the series S aswell or just the X?

i orderd the springs and wheels fore the ender -3 v3 se but i dont understand the z ofset thing how o start that on my printer ?

Thanks for the great and informative video. I'm currently having issues recording anything above 30 minutes in 4K HDR. I will try SDR tonight to see if this makes a difference. Currently trying College Football 25, where other games have recorded with no issues. When I stop recording I do not get the notification on screen and the video is on the SD card but corrupted. Sometimes takes forever for some recordings to even show up for OneDrive uploading. Thanks again!

How about laying a sheet of heavy aluminum foil, on a heated glass bed? Will the print adhere to the foil or stick to it?

Exactly what I needed 😁 thanks

I have been very pleased with California Filament PETG colors $23 +/- per 1kg. Also have several matte colors.

Thanks a lot, your profile works very well

I've been dealing with bed leveling for the past few days and using a receipt over printer paper really felt like it improved things and was easier to level. Thank you!

I did everything here and it still won’t let me record for an hour. It’s not an issue with this video, it’s an issue with Xbox. Every day I get closer to buying a PlayStation and tossing that thing in a dumpster. Exclusives are supposedly gonna go to PlayStation anyway