วีดีโอ

I.also replaced the water pump

What if I just needed to reprogram it? My mother has this 7111L model, but it stopped working after I changed her car battery. She usually presses the remote button 2 times, and the lights would blink twice and turn the powers on. Then when I press the button a third time after that I’d when it would usual start. Now it would just try to start, but wouldn’t complete the start.. I hope I could find that program wire, hopefully it wasn’t missing like this vehicle in the video. Please let me know when you the chance? Thank You!

Sorry for the background noise. Too many children 😊.

It's amazing to see tjis video after 5 yrs. I'm gonna try this on my 07 sienna tomorrow, i hope come back here with positive testimony like others.

When you flushed it out and filled the tank and start the engine, did it immediately drop down that you would need to add more coolant? Because I have 2022 Toyota Camry hybrid, and when i started the engine, it didn’t drop down. The most I added was 2/3 of an inch over time. To make it full. But it didn’t drop down like a few inches down. Is that normal?

Thank You!! I ripped wires out changing plugs. Best video. You just saved me a lot of time.

THANKS MY BROTHER I HAVE A TOYOTA SIENNA 2006 ONLY 23400 MILES .. I WENT FOR OIL CHANGE AND THE MACHENIC AFTER ME SAYING SELL IT TO ME SINCE THEN THE LIGHT KEEP ON FLASHING OF AIR BAG YOUR ADVISE HELPED AND THE LIGHT IS GONE YOU KNOW WHAT IT CAME FROM THE BOTTOM OF MY HEART GOD BLESS THIS GUY THANKS ONCE AGAIN

375,465miles? Am I reading that correctly.

Same story as many have posted here. Thank you very much.

This work I just did this Thanks

Unplugging connectors worked. Thank you

My 2008 Toyota Sienna has been making a squeeking noise for about two months. It cones and goes. Took it to a mechanic. He piured water on the belt and squeeking disappeared. I bought belt dressing and it wirks for about 5 minutes, but upon accelaration it returns. I previoysly had another mechanic chabge that belt. I spoke to two new mechanics which both stated that the belt used is too loose, not correct belt. I live in Cancun Mexico, where mechanics are very shady, more than the US. Tgey said tensioner is good. What do you guys think?

Hello sir. My wife's Honda will turn over but not start. Did what your video said and still did not work. I noticed that the key light would come on in the instrument cluster. So I put the key in the first position, and it starts runs for a minute and then shuts off. If I put the key in the second position, it runs and does its thing properly. I know it's been a while since you made this video, but is there any suggestion? Thanks

Hi , thanks ......What else is good to replace while doing this ???

I have a 11 es 350 the sensor is not in tht location

Nicely done thank you

Thank you.

How about the 2015 Highlander Limited 3.5L V6 Intermediate Shaft Speed A. Circuit. Toyota Part Number and location??

I did it on my Toyota Sienna 2007 and it worked. Thank you so much for taking the time to post this video :)

Thanks for the video! I have a 2007 Toyota Sienna LE. Can you tell my which number this sensor is? The Toyota website asks if it's 1 or 2?

How can I bring it back to normal?

Thank you boss

Hi what is about the 2014 Sienna is it the same sensor?

good video, it worked. my 2005 Sienna was in a minor side impact accident a while back and even though the air bags never deployed the light for it was on since it came back from the body shop.

Thank you for this video!

Yup. Happened to me and a friend the other day.

Thank you still works in 2024

5:11 detach plastic panel inside, fish out your cable. It's not a back hole at all.

Thanks :)

Thank you sir. This was exactly the solution to my problem.

This worked! Thank you so much!😊

The instructions were clear and detailed. You made it a breeze!!! Thank you

Thank you for providing these details for making this process more manageable! I worked my way through college as a mechanic, but that was 45 years ago…nothing matters as much as recent experience! Well done, sir. (Don’t worry about the “ratcheting ratchet”error. I usually as for “The thing-a-ma-jig! You know…”

I disconnected both and sprayed some DeOxit5 on the terminals and it didn't work. But five minutes later, it did. Very nice, especially since the dealer said the repair might run me up to $6,000.

This is like the fourth time I've watched this over the last couple years..... THANKS

4:19 The sound before repair. This is a link for a video shot 3 years after the repair. Watch it if you want to compare the sound before and after. th-cam.com/video/0JwaPhwGIHw/w-d-xo.htmlsi=E4kWcBbrc16jo7BP

Work smarter not harder, straight up.

Been dealing with an intermittent P0368 since I bought my 07 es350 a couple years ago. Picked up 4 of these plugs with 3 wires pinned and those heat shrink connectors for $20. Figured it would be good to have some spares for practice and in case I need them in the future. Your video helped me out so much. Job took me 9 hrs because it's so tight back there and I wanted to be extra careful. Finished this 6 months ago and it worked perfectly. Thank You!

Here is my updated video for my second Breville oven with the same problem th-cam.com/video/Y-ZHNPt1Dno/w-d-xo.htmlsi=583Mda0zfhq0INtY

The hose from the back of the intake manifold that you pointed out, where does the other end go? I’ve been looking for it but can’t find it.

I just followed your instructions this afternoon (7/6/2024) on my 07 Sienna and was able to change my speed sensor within 30 minutes. What took me the longest was trying to take out some old rusted screws that were holding on to the air filter clamp for dear life, lol. The original sensor was a little tough to take out to but with a little twisting and turning, it finally came out. Once those screws and original sensor came out, the new sensor was installed easily and it was really easy to put it all back together again. Thank you for recording this video for the general population. You saved me a few hundred dollars!

Funny how universal this problem is. I was replacing all 6 plugs and coils and ripped this sensor out too. Thank you so much for this video!

Mahalo! Awesome video H Alganis, worked for my 2007 Sienna that has over 285,000 miles on it!

Thanks for sharing! Because of your video I was able to know which part to order & how to fix our same issues on our 2007 Sienna. lt looks like it's easy enough that I can attempt it myself. I got the parts ordered & now just have to go to Walmart & get the tool set. Very helpful!

Hd had a blowout not shifting right and no speedometer

Wow perfect fit. Thanks heaps!

Epic, thanks for making this video.

THANK YOU! It may only be off temporarily, but I'm grateful for your concise and valuable video!

Can this mode be used to replace rear brake pads on Hybrid Avalon 2021 ?