- 13
- 64 115
MiToHub
Netherlands
เข้าร่วมเมื่อ 26 เม.ย. 2020
Videos about my Stage 3 tuned Alfa Romeo MiTo, I have had this car for the last 8 years and have done many mods to it. And even after 9 years... I still have many more mods to come. Please follow me on my journey and let me take you through the most extensive and expensive build I have ever done. If you have any questions or suggestions about my content, please let me know in the comments!
Don't forget to subscribe and turn on the notification bell, you do not want to miss what's to come :)
Instagram: @ildiavoloalfarosso
Don't forget to subscribe and turn on the notification bell, you do not want to miss what's to come :)
Instagram: @ildiavoloalfarosso
Can you 3D Print a Subwoofer for your CAR?! - €19 Aliexpress PA-60A Amplifier & Sound test!
Welcome to my channel, this time I have 3D printed a subwoofer with an old LG home cinema subwoofer! I bought the amplifier from Aliexpress, it's the PA-60A and only costs €19!!! This amplifier has been tested by other youtubers and the results are shocking... it should provide almost 100 watts RMS!
I only connected this subwoofer for testing purposes, in the video you can see another homemade subwoofer which is my Hertz Mille 700w RMS sub (which was disconnected during this test). The music is from a copyright free playlist!
Please consider liking and subscribing to my channel and let me know what the next video should be! :) Should we replace a stock Bose subwoofer in an Alfa Romeo with this one? Let me know!
I only connected this subwoofer for testing purposes, in the video you can see another homemade subwoofer which is my Hertz Mille 700w RMS sub (which was disconnected during this test). The music is from a copyright free playlist!
Please consider liking and subscribing to my channel and let me know what the next video should be! :) Should we replace a stock Bose subwoofer in an Alfa Romeo with this one? Let me know!
มุมมอง: 379
วีดีโอ
World's First 3D Printed AMP RACK! - Audio Install on Alfa Romeo MiTo
มุมมอง 1572 หลายเดือนก่อน
Worked on this project for a few weeks, I am amazed by the results and it sounds even better than it looks. Unfortunately I recorded a video with copyrighted music... I will make a sound test video as soon as possible! My full audio setup: Head unit: Pioneer SPH DA250DAB Speakers front rear: Hertz Mille MPK165.3 Subwoofer: Hertz Mille ML2500.3 Amplifiers: Audison SR4.500 & Audison SR1.500 DSP: ...
The cheapest 330mm big brake upgrade kit for Alfa Romeo MiTo & Abarth 500 595 695 Punto!
มุมมอง 2.2K11 หลายเดือนก่อน
Hey guys, I'm back with another video. I bought some 159 calipers for my Alfa Romeo MiTo QV, now she finally has some stopping power to tame the 260 horses! As you will see in this video, the installation is very very very easy! You will just need to source all of the parts, which can be the hardest part. But I can definitely tell you... You will not regret this modification! 330mm on the MiTo ...
260hp straight pipe MiTo QV TD04 & friends | Alfa Romeo MiTo club NL | Viva Italia Zandvoort
มุมมอง 57611 หลายเดือนก่อน
Viva Italia @ F1 circuit zandvoort is an event for all Italian cars, we try to attend this event every year with our MiTo club.. we had a blast! What you are seeing are the parade sessions, which are fairly slow and safe. You can see my MiTo QV in the first few clips and a bit later on in the video, most of the other MiTos are friends from the club. Until the next video!
Alfa Romeo MiTo QV | Magneti Marelli diffuser & Custom valved Exhaust | Sound test!
มุมมอง 8Kปีที่แล้ว
Dear viewer, welcome to my channel! I hope you enjoy the video, please consider liking and subscribing so I can make much more content about my MiTo QV (: It has a lot of work done to it, you can see my full list of mods here: AMG air vents Carbon fiber spoiler (DIY) Magneti Marelli diffuser Sabelt belt covers Led interior lights DNA racing strut Ferrari instrument cluster Red speaker rings Sho...
GMC Exhaust Manifold unboxing Alfa Romeo & Fiat & Abarth 1.4 Multiair/T-Jet (collettore a cuore)
มุมมอง 1.4Kปีที่แล้ว
Finally a new video, I didn't have much time lately due to exams and a very large Italian car show, for which I had to prep my car. And now she's back, better than ever with the homemade carbon spoiler, a new custom exhaust with a valved muffler and a new Magneti Marelli diffuser. And icing on the cake... the new GMC exhaust manifold. This thing looks goooood.... What do you think about the GMC...
Alfa Romeo MiTo/Giulietta (QV) | Ferrari Cluster Tutorial | Quadro Strumenti Ferrari Tutorial
มุมมอง 13K2 ปีที่แล้ว
Changed my MiTo instrument cluster with some goodies from risicosfizio, now it really looks like I have a baby Ferrari! I like the look so much, it's also available for the Alfa Romeo Giulietta. On his webshop you can also find pieces for the 147, 156, 159, Giulia, Stelvio, 4C etc. Let me know what you think in the comments below! Please subscribe and like this video if you want to see more MiT...
Alfa Romeo MiTo QV TCT 260HP TD04 Turbo | POV Driving Through Belgium
มุมมอง 10K2 ปีที่แล้ว
Great weekend with the MiTo club Netherlands, finally had some time to make a new POV video. This time with the new turbo, intercooler etc. The TD04 is an absolute beast, the car is pushing around 260hp and 305nm at the moment. I have many more mods to come, so stay tuned for more content of my beautiful MiTo and our very active MiTo club! If you have any suggestions on what content you'd like ...
210hp Alfa Romeo MiTo QV | POV Night Drive
มุมมอง 7K2 ปีที่แล้ว
Welcome to my channel, this is my first POV video and I intend to make many more, enjoy! Please consider subscribing if you like my content (: 2015 MiTo QV TCT Full G-Tech exhaust 200 cell cat KW V3 suspension K&N Open Air Intake Big Intercooler Stage 2 MTD map Filmed with: Samsung S9 on Baseus Gimbal GoPro Hero 8
Hang revs like its 2024
I think it's better to use a thinner paper or a semi transparent (Pargament paper) than an original A4 for a better illumination at night and to cut the paper where the red RPM digits are so it will illuminate more even. Anyway, if you order it today it should arrive with a proper white nylon cover as a solution.
Where I can find that yellow background to the revmeter
Тоже хочу
260hp out of a multiair engine? How did you manage that?
Big turbo, TD04 13T with billet 6+6 wheel, stainless exhaust manifold, full exhaust, airtec intercooler and a lot of boost haha!
whats these automatics clutcpacks rated for ?
350nm is the maximum, I have taken the car 2 times to different dynos, one showed 270nm and the other showed 300nm, it's safe for now :)
@@MiToHub oh ok, no slippage yet?
Where can I buy this diffuser?
Where did u get those flipper extensions
what exhaust have you got on here? Is it just the turbo upgrade for the power increase or have you got other parts on the car as well?
i got a mito its my dream to do this
What is the minimum rim size for this mod?
17 inch is the minimum, 16 will not fit anymore🍀
Why the paper beyond?
The LED illumination spread is uneven without it. Now they deliver it with a white nylon cover to solve this issue.
Is changer meter visible in the nacht? In Giulietta 940 at least the gauges visibility ot original gauges soles are bad too.
Did you have any issues running that power
Not at all, very reliable. I have owned the car for the past 9 years and only had to change a coilpack once, other than that very reliable power! :)
No sirve la pinza Brembo del mito?
I think originally i looked better, also it seems you have destroyed the startup animation
MiTo QV 210hp? Not such a thing..
It had a stage 2 tune at the time, it's now at 260hp. So yes, there is such a thing! :)
@@MiToHub okay but not an original QV
@@michaelsciamever heard of tuning? 😂
@@Mytieten not interested in fakes..😊
@@MiToHub260hp 😳 i have the same car, how well does the clutch and the shifter hold with such high power?
How does it look in the night, when the low beam is on? You mentioned you put a piece of paper behind it, due to illumination, but I think it's good to know what kind of effect it causes in the night, when the background light is on.
It looks good, however I don't have pictures of the cluster at night time.
Did you turned out the start up animation? Or the instrument cluster does not anymore, since it detects some position error?
Have to admit that looks good
i want to upgrade my 1.4tjet 155hp but i was wondering how do you pass emissions ? apart from obvious methods. if you keep the cat in can you tune it down to match even with a setup like yours(i know yours is decat) ?
Mine has a 200 cell cat in the center pipe, it depends on your country and their legislation.
I do not like the new look. Love though the sound
+++
Is the TCT gear box reliable???
Very reliable🍀
Why not all yellow?
They don't make it like that, unfortunately🙏
Why did u use paper behind the yellow one?
what spoiler is that?
The spoiler is from FR Tuning. I carbon skinned the spoiler myself🍀
was soll das mit den lüftungen , die orginal waren super , der mercedesnachbau ist scheißee
The original ones felt really cheap, also these are not replicas but genuine mercedes parts😅
@@MiToHubdo they fit without pressure?
Beautiful car!!❤ Where can I find those seats? I have been looking everywhere and couldn't find them:(
I ordered them with the car when I bought it, don't think you can find them easily🥲
@@MiToHub owh okay bro👌 Do you have any nice engine tuned parts?
@@orishevach After this video I put on some more mods, it's now got a TD04 turbo, GMC manifold, mrmotorsport open air intake, airtec intercooler etc.😁
Do you have the low MRmotorsport intake? If so is it worth buying?@@MiToHub
is that a remap, or have you got a new exhaust on it??
The pops are programmed in the remap, the exhaust is valved, straight pipe on demand
How reliable has the car been so far? I'm getting a stage 1 tune in the upcoming weeks, I only have a k&n air intake so far. The tuning company doesn't advise me to go above 180 hp and 270 nm torque, but they do say it can be upped to 300 nm and 185 hp too, however they advise against it. How's your experience regarding this so far?
This car has been reliable as hell, I've had it for almost 9 years already and only had problems with my ignition coils once. Multiair and Tjet engines are very reliable, if you mantain them correctly, even with 260+hp I've never experienced any problems.
I know it's late but honestly your tuning company don't have a clue about them. That is the basic map for the Fiat 500 which they just use on the MiTo. Over here in the UK we have loads of tuning companies that quote the same as you said here but then you talk to someone who actually knows the multiair engine on the mito and will advise otherwise. I know someone with 300hp+ with a better turbo, fuel injectors etc but still same engine. They are super reliable and can get to nearly 400hp on the stock engine WITH the supporting mods. My MiTo is roughly on 200hp with custom duel catback exhaust, carbon airbox, silicon hoses and soon to get intercooler. With a map it can go about 220hp with those mods (turbo limits it) with a better turbo and fuel injectors I am looking at 280-300ish (280 is safest). They are highly tuneable cars just not a lot of tuning companies know about them. See someone that knows about their engines
+10% extra horsepower 🏁
Can you post a link where to buy the diffuser?😊
Search for "parco chiuso" on ebay and you'll find it!
Sounds great
Thank you!
Thank you for your video. After watching it, I bought the kit for my Giulietta and still love it. ❤🍀🐍🚙
Great to hear!
Diarhea and bronchitus.
Idk I hear bad thing about AR
So you live by other peoples opinions. Don't forget to let your wife be rated by your neighbours. 👌
I hear bad things bout your mom
Dikke bak! Ik ben ook op zoek naar die achter bumper voor mijn qv’tje. Maakt hem zoveel dikker. Heb je misschien een linkje voor mij?
🔥🔥
I’ve just put an airtec intercooler 2.5” free flow exhaust by infinity and a tmc 200 cell cat, stage 2 remap next …
Love the fact that we ended up on the wrong side of the circuit at the end of the drive 😂 Great vid bro, keep it up
Thanks bro😂 next time we know which side to go😜
Please can you let us know where we can buy the yellow cluster for the mito Thank you Nick
Hi Nick, thanks for watching! I bought it from risicosfizio.it
Sorry but at least you could turn lights on so we could see illumination
Thank you for watching! At 13:40 you can see me turning the lights on and off, since it was filmed in broad daylight, you can't see the illumination very well.
Yo you sellin your car on mobile?
Just got myself the multi air 140 exhaust this Friday , then the airtec intercooler
?
Thank you for watching! You will love the Airtec intercooler, very nice quality🔥
Why is there no needle sweep, to the max, when you turn on the ignition?
Thank you for watching! I really don't know, it normally does sweep😅
Is the car very different with the td04 over stock tuned? I'm considering doing this, but a bit on the fence about it, as it's pretty illegal where I'm from
Hi Liebach, thank you for watching. If you like low rpm torque, than this is not the right turbo for you. The td04 will make power until the redline, which is great for me. But I can imagine some people would find the low rpm torque disappointing in day to day traffic. Turbo lag is a little more (around 400-500rpm extra for full boost) than stock, but considering this turbo delivers almost 90hp more than a stock MiTo QV, I'm more than happy with how it drives (:
@@MiToHub Mine has around 185 HP right now, but more power is always intriguing. But might just stick to stock turbo then. But i have the 155 tb and not the QV
Why u put white peaper under yellow one
Hi Ibrahim, thank you for watching. Some people reported to me that not all numbers were lit up evenly. A small piece of paper solves this problem, but makes the light a little more dim. I suggest using really thin paper. But ofcourse this step is not necessary if your lights are clearly visible without it.
How you cancelled the active suspension?
Hi João, thank you for watching, I make the adaptive suspension cancelling resistors myself. If you are interested, please send me a message on instagram: @ildiavoloalfarosso. I can make them with original connectors a lot cheaper than elsewhere.
Link to buy??
Risicosfizio.it
Where did you get the ventilation nozzles from?
Hi Jonny, thank you for watching! The nozzles are from a Mercedes Benz A class, the product number is A1768300354. These are the only ones that will fit, they do however need to be trimmed around the edge to fit correctly😁